How should I get the scratch[s] out of my TE-S?

Chrnocide · July 11, 2010, 5:07pm

So… somehow my stick fell on my carpet and the front end of the stick got scratched up… don’t ask how 'cause I wouldn’t be able to tell you.

Anyway, this is the stick and scratch;

I was wondering how I should buffer/sand/whatever it out? What would be the best route?

I have a dremel if that would help, and a couple of different options for bits;

What do you guys think? I’m no expert on plastic… or anything for that matter.

jamesepoop · July 11, 2010, 6:24pm

Try a plastic polish/renew kit. They sell them at auto chains. One brand that comes to mind is Nexus. Give that a shot before buffing with a dremel.

blacksquid · July 11, 2010, 6:35pm

^^Yep or I usually use micromesh up to 12k for that type of work.

Chrnocide · July 11, 2010, 6:53pm

o _ o … so I have to go and spend money… is there a cheaper… alternative way… that doesn’t involve money… D:

jamesepoop · July 11, 2010, 7:27pm

Sure thing. Most people have them in the desks. It’s called a Sharpie. Preferably black.

NotANoob81 · July 11, 2010, 9:55pm

You could try to blend with a heat gun. The TE is so susceptible to scratches due to it’s cheap plastic.