I’m looking for a comercialy produced stick to mod, and these two are inexpensive and look pretty good.
http://www.play-asia.com/paOS-13-71-7f-77-2j-49-en-15-hori%2Barcade-70-1e9y.html
Looks the same as those hori SC2 & T4 sticks except that it only has 3 buttons. I can’t tell from the angle of the picture if it’s the regular hori button layout just missing three or if the top pink button is a little further up. If the layout is the same i would just drill out holes for the rest of the buttons, otherwise I would have to some how try to fill in the top hole a bit and then drill it when the material dried. So i was wondering if anyone has seen one and happens to know if the button layout is different. Or if any one has any advise on what to do about filling the extra empty space the top hole would have.
http://www.play-asia.com/paOS-13-71-2a-49-en-70-2nd.html
This one has gotten plenty of good reviews, I’m wondering though how easy it is to mod and if those buttons are good and usable along with the stick too. Reviews say it’s a little tight, but I play on a seimitsu so i’d prolly wouldn’t mind that anyway.
I’m pretty much trying to figure out if the price difference is worth the effort if I’m going to have to do some drilling and filling on the hori. I really like that hori case, but if it has a funked up button layout that won’t do.
thanks!