Hori Real Arcade Pro Thread for all versions (IN PROGRESS, COULD USE YOUR HELP AND INPUT) v2

Tech Talk
1

This post is in progress and will forever need updating.

NOT ALL INFO IS 100% CORRECT! SO IF YOU ARE USING THE DESCRIPTIONS TO MAKE PURCHASES, PLEASE DO ADDITIONAL RESEARCH. A LOT OF THE INFORMATION BELOW IS COPY/PASTE.

IF YOU ARE ABLE TO HELP PROVIDE INFORMATION, PHOTOS, DETAILS, OR PERHAPS EVEN HELP DO RESEARCH USING THE LINKS AT THE BOTTOM OF THIS FIRST POST IN SPOILER TAGS AND REPORT BACK, IT IS MUCH APPRECIATED.

It’s taken me a lot of time to gather this information up so far, put it in a neat format, find photos and resize etc. If you can volunteer to help for the good of all arcade stick lovers and SRK TT, please do.

First off, I’ve gotta shout out @Superking for the original post back in July 2005 and for the work he did in keeping track of info and data on the Hori RAP sticks at least up until the middle of the PS2 gen and some of the PS3/360 gen.
Below you’ll see the info he organized reworked in a new format with more info and photos.

Original thread (39 pages of topic from July 2005 to mostly April 2012)

Shoutouts to those who’ve helped provide information on this updated list that deserve credit for their contributions:

@hibachifinal @VirtualCosmic @Darksakul @NENDO @Digital- @quashpdarkman @N10248 @anzhar @Batsu @General_Awesomo

If you have general arcade stick questions, please ask in the “Absolute Question and Answer Thread v.3 (ASK YOUR QUESTIONS HERE!)” thread

If you desire information on other arcade sticks that are not listed here or want suggestions on what to buy, please visit the “What Stick/Controller Should I Buy? Read the Guide on Pg 1 Before Posting.” thread

There will be no tier list, and there will likely not be a “I SUGGEST YOU BUY ________ ARCADE STICK” info.

This is information for you to use to your advantage to make an independent decision based on what features you may or may not enjoy.
PLEASE PLEASE PLEASE do not come in to this thread and just ask “Which one should I buy?”.
Use knowledge below to grow, think, and learn.

Listed in order of console:

Playstation 1 / Playstation 2
Playstation 1 / Playstation 2
Playstation 1 / Playstation 2
Playstation 1 / Playstation 2
Playstation 1 / Playstation 2

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP1-Mirror-01.jpg

Hori RAP1
=Hori Real Arcade Pro (Mirror Finish)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg or 5.7 lbs)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Mirror finish looks nice but is easily susceptible to scratches and fingerprints
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK
=Mounting a Seimitsu LS-32 is possible with modification, previous documentation lost to GeoCities

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
+Quick disconnects for buttons allowing easy swap
=Unsure if joystick connection is 5 pin or soldered on individual microswitches

Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-CFJ-01.jpg

Hori RAP CFJ
=Hori Capcom Fighting Jam

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
+Quick disconnects for buttons allowing easy swap
=Unsure if joystick connection is 5 pin or soldered on individual microswitches

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP1-Orange-01.jpg

Hori RAP1
-Hori Real Arcade Pro Orange Amazon Exclusive

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions-
=What is the official title for this arcade stick from Hori?
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP1SA-01.jpg

Hori RAP1 SA
=Hori Real Arcade Pro Special Addition
=Special Addition also can be viewed as Hori’s way of saying Sanwa (SA)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Sanwa OBSF-30RG and OBSF-24 in custom Vermilion color

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP1SE-01.jpg

Hori RAP1 SE
=Hori Real Arcade Pro Special Edition
=Special Edition also can be viewed as Hori’s way of saying Seimitsu (SE)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Seimitsu LS-32-01

Buttons-
-Seimitsu PS-14-GX

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-AH1-01.jpg

Hori AH1
=Hori Arcana Heart Arcade Stick
(unsure of official title since it’s difficult to find data on now)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (___________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
-Buttons mounted on PCB instead of having own quick disconnects

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-AH2-01.jpg

Hori AH2
=Hori Arcana Heart 2 Arcade Stick
(unsure of official title since it’s difficult to find data on now)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (___________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
=NEED INFO/DETAILS

Buttons-
=NEED INFO/DETAILS

PCB-
=NEED INFO/DETAILS

Wiring-
-Buttons mounted on PCB instead of having own quick disconnects

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-FUC-01.jpg

Hori FUC-LE
=Hori Real Arcade Pro Stick Fate/Unlimited Codes Limited Edition
(unsure of official title since it’s difficult to find data on now)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (___________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
=NEED INFO/DETAILS

Buttons-
=NEED INFO/DETAILS

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP2-01.jpg

Hori RAP2
=Hori Real Arcade Pro 2

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP2SA-01.jpg

Hori RAP2 SA
=Hori Real Arcade Pro 2 Special Addition
=Special Addition also can be viewed as Hori’s way of saying Sanwa (SA)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Sanwa OBSF-30 (Blue) and OBSF-24 (Dark Hai specifically made for this stick)

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-SCIII-01.jpg

HRAP SCIII
=Hori Real Arcade Pro Soul Calibur III

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
=NEED INFO/DETAILS

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
-Buttons mounted on PCB instead of having own quick disconnects

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-Tekken5JP-01.jpg

HRAP Tekken 5 JP
=Hori Real Arcade Pro Tekken 5

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-Tekken5US-01.jpg

HRAP Tekken 5 10th Anniversary
=Hori Real Arcade Pro Tekken 10th Anniversary

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
-Hori

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

Playstation 3
Playstation 3
Playstation 3
Playstation 3
Playstation 3

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP3-01.jpg

HRAP3
=Hori Real Arcade Pro 3

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels
+Easy Top Panel access through Hex key

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-Hori stock buttons

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS3 cable exits base on back
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP3SA-01.jpg

HRAP3 SA
=Hori Real Arcade Pro. SA

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight ___________
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
+Sanwa OBSF-30, OBSF-24

PCB-
=NEED INFO/DETAILS

Wiring-
=NEED INFO/DETAILS

USB Cable-
=PS3 cable exits base on back
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP3-SE-01.jpg

Hori RAP 3 SE
=Hori Real Arcade Pro. 3 SE

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels
+Easy Top Panel access through Hex key
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Seimtisu LS-32-01

Buttons-
+Seimitsu PS-14-G, PS-14-D

PCB-
=same as HRAP 3

Wiring-
+Buttons are quick disconnects
+5-pin Joystick Harness

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP3AA-01.jpg

Hori RAP 3 Amazon JP
=Hori Real Arcade Pro Amazon.co.jp Edition

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels
+Easy Top Panel access through Hex key
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-HORI stock buttons

PCB-
=same as HRAP 3

Wiring-
+Buttons are quick disconnects
+5-pin Joystick Harness

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP-N3-SA-01.jpg

Hori RAP N3 SA
=Hori Real Arcade Pro N3-SA

Release date: 2014

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Unique door over recessed mounting for Start button slides into pocket within case when opened.

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF

Buttons-
+Sanwa OBSF-30

PCB-
=Common ground

Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector

USB Cable-
=USB 2.0
=Plastic door cord compartment

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAPBlaz-01.jpg

Hori RAP 3 BlazBlue
=Hori Real Arcade Pro. 3 BlazBlue

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
+Exclusive blue case

Metal Panels-
+Both top and bottom metal panels
-Two-point Joystick Mount (Seimtisu VF/JLF Wings)

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-HORI stock buttons

PCB-
=same as HRAP 3

Wiring-
-Buttons are PCB Mounted
+5-pin Joystick Harness

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-DoA5-PS3-01.jpg

Hori RAP Dead or Alive 5
=Hori Real Arcade Dead or Alive 5

Release date: 2012

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
= Unique door over recessed mounting for Start button slides into pocket within case when opened.

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF

Buttons-
+Sanwa OBSF-30

PCB-
=Both common ground

Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector

USB Cable-
=USB 2.0
=Plastic door cord compartment

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP-MSGEVS-01.jpg

Hori RAP Mobile Suit Gundam: Extreme V.S.
=Hori Real Arcade Mobile Suit Gundam: Extreme V.S.

Release date: 2011

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Unique door over recessed mounting for Start button slides into pocket within case when opened.

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK with dark blue balltop

Buttons-
+Sanwa OBSF-30

PCB-
=Common ground

Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector

USB Cable-
=USB 2.0
=Plastic door cord compartment

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP-MSGEVSFB-01.jpg

Hori RAP Mobile Suit Gundam: Extreme V.S. Full Boost
=Hori Real Arcade Pro AX S+G

Release date: 2014

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Unique door over recessed mounting for Start button slides into pocket within case when opened.
=Full Boost version is the only version with transparent door over Start button.

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF

Buttons-
+Sanwa OBSF-30

PCB-
=Common ground

Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector

USB Cable-
=USB 2.0
=Plastic doored cord compartment

http://www.frankcastleaz.com/images/tt/RAP/Hori-SFIV-01.jpg

Hori SFIV
=Hori Street Fighter IV Arcade Stick
(unsure if this is “official” title)
(Does not have RAP in the name but is same build/parts)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Black case

Metal Panels-
+Both top and bottom metal panels
-Two-point Joystick Mount (Seimtisu VF/JLF Wings)

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Red/Black theme with Ryu & Ken

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK with Red Balltop

Buttons-
-HORI stock buttons (Red)

PCB-
=same as HRAP 3 (assumed)

Wiring-
-Buttons mounted on PCB instead of having own quick disconnects
=Unsure whether joystick is 5 pin harness or individual soldered on microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP-SCV-01.jpg

Hori RAP Soul Caliber V
=Hori Real Arcade Pro Soul Caliber V

Release date: 2012

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
= Unique door over recessed mounting for Start button slides into pocket within case when opened.

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF

Buttons-
+Sanwa OBSF-30

PCB-
=Both common ground

Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector

USB Cable-
=USB 2.0
=Plastic door cord compartment

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP3-Tekken6-01.jpg

Hori RAP 3 Tekken 6
=Hori Real Arcade Pro. 3 Tekken 6

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Black base

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
=Type of joystick unknown (Black balltop)

Buttons-
=Type of button unknown (Dark Hai color)

PCB-
=Same as HRAP 3 (Assumed)

Wiring-
=Unsure if buttons are quick disconnects or soldered to PCB
=Unsure if joystick is 5-pin harness or soldered to microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-TTT2P-01.jpg

Hori RAP 3 Tekken Tag 2 Prologue
=Hori Real Arcade Pro. 3 Tekken Tag 2 Prologue
+Last ever Original HRAP design produced

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels
-Two-point Joystick Mount (Seimtisu VF/JLF Wings), uses the JLF mounting plate points
+Namco NOIR Layout

Plexi/Art-
=No default plexi

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-HORI stock buttons

PCB-
=Same as HRAP 3

Wiring-
+Buttons are quick disconnects
+5-pin Joystick Harness

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP-TTT2-01.jpg

Hori RAP Tekken Tag Tournament 2
=Hori Real Arcade Pro Tekken Tag Tournament 2

Release date: 2011

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
= Unique door over recessed mounting for Start button slides into pocket within case when opened.

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF

Buttons-
+Sanwa OBSF-30

PCB-
=Both common ground

Wiring-
=Button s have quick disconnect wiring
=Joystick has 5-pin JST connector

USB Cable-
=USB 2.0
=Plastic doored cord compartment

Playstation 4 / Playstation 3
Playstation 4 / Playstation 3
Playstation 4 / Playstation 3
Playstation 4 / Playstation 3
Playstation 4 / Playstation 3

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAPv4-01.png

Hori RAP V4
=Hori Real Arcade Pro V4 Hayabusa for PS4 & PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/189004/hori-hrap-v4-announced-compatible-with-ps3-and-ps4/p1

Case-
Hori Case (Same as RAPV3/RAPVX/UMvC3/DoA models for PS3/360)
=One main plastic base. Does not have individual plastic pieces.
=Sizes - Width = 430mm, Depth = 240mm, Height (including lever) = 125mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
+Tek Innovations does have plexi option (Same as V3/VX non-Kai)

Bottom Padding/Feet-
=No padding
=Four small rubber feet

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons

PCB-
=Common ground. Unsure if active high/low. Unsure if able to multi-mod without complications due to insufficient testing.
+Easy to remove main PCB from base
=Button signals/grounds, and USB cable are soldered to PCB while joystick connector and ribbon cables to Turbo/Home PCB are removable from main PCB

Wiring-
=Typical

USB Cable-
=Wire and cord compartment

Unanswered Questions Due to Insufficient Testing-
-Is the PCB possible to multi-mod with? We know it’s common ground, but we don’t have if is active high/low.

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAPv4SILENT-01.png

Hori RAP V4 Silent
=Hori Real Arcade Pro V4 Silent Hayabusa for PS4 & PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/189004/hori-hrap-v4-announced-compatible-with-ps3-and-ps4/p1
(Same thread as non-silent version)

Case-
Hori Case (Same as RAPV3/RAPVX/UMvC3/DoA models for PS3/360)
=One main plastic base. Does not have individual plastic pieces.
=Sizes - Width = 430mm, Depth = 240mm, Height (including lever) = 125mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
+Tek Innovations does have plexi option (Same as V3/VX non-Kai)

Bottom Padding/Feet-
=No padding
=Four small rubber feet

Joystick-
=Hori Hayabusa joystick with optical switches

Buttons-
=Hori Kuro buttons with silencer pads

PCB-
=Common ground. Unsure if active high/low. Unsure if able to multi-mod without complications due to insufficient testing.
+Easy to remove main PCB from base
-Button signals/grounds, and USB cable are soldered to PCB while joystick connector and ribbon cables to Turbo/Home PCB are removable from main PCB

Wiring-
=Typical

USB Cable-
=Wire and cord compartment

Unanswered Questions Due to Insufficient Testing-
=Is the PCB possible to multi-mod with? We know it’s common ground, but we don’t have if is active high/low.

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4KAI-01.png

Hori RAP 4 Kai
=Hori Real Arcade Pro 4 Kai for PS4 & PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/195974/hrap4-kai-initial-impressions
(Same thread as HRAP 4 Kai/HRAP.V Hayabusa)

Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes: Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back

Metal Panels-
+Both top and bottom metal panels
=RAP 4 Kai has Vewlix layout with wider spread between joystick and buttons

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Undetermined whether a plexi via Tek Innovations for V3/VX would still fit properly. Even if changed, it’s unlikely they wouldn’t have a plexi for it in the near future.

Bottom Padding/Feet-
=Padding on bottom where stick sits on legs
=No feet

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons

PCB-
=Common ground PCB (Same as HRAP 4 Kai/HRAP.V/DoA5LR)
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
=Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector

Wiring-
-Signal/Ground wires are soldered on to buttons

USB Cable-
=Wire and cord compartment
=Cable length (3m)

Unanswered Questions Due to Insufficient Testing-
=Is the PCB the same for both models of this body type?
=Is the PCB possible to multi-mod with? We know it’s common ground, but we don’t have if is active high/low.

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP5-01.png

Hori RAP.V
=Hori Real Arcade Pro.V Hayabusa for PS4 & PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/195974/hrap4-kai-initial-impressions
(Same thread as HRAP 4 Kai/HRAP.V Hayabusa)

Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes: Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back

Metal Panels-
+Both top and bottom metal panels
=Vewlix layout with standard spread between joystick and buttons

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Undetermined whether a plexi via Tek Innovations for V3/VX would still fit properly. Even if changed, it’s unlikely they wouldn’t have a plexi for it in the near future.

Bottom Padding/Feet-
=No padding
=Four small rubber feet

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons

PCB-
=Common ground PCB (Same as HRAP 4 Kai/HRAP.V/DoA5LR)
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
=Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector

Wiring-
-Signal/Ground wires are soldered on to buttons

USB Cable-
=Wire and cord compartment
=Cable length (3m)

Unanswered Questions Due to Insufficient Testing-
=Is the PCB possible to multi-mod with? We know it’s common ground, but we don’t have if is active high/low.

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-01.png

Hori DoA5LR
=Hori Dead or Alive 5 Last Round for PS4 & PS3
(Not technically an HRAP as it has no “Real Arcade Pro” in the title, but uses same PCB and case as other HRAPs)

SRKTT thread (DoA5LR)-
http://forums.shoryuken.com/discussion/194638/hori-ps4-ps3-dead-or-alive-5-last-round-stick/p1

Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes: Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back
=DoA5LR has an extra piece connected to front middle of case with analog sticks. Unsure if removable yet due to insufficient testing

Metal Panels-
+Both top and bottom metal panels
=Vewlix layout with standard spread between joystick and buttons

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Undetermined whether a plexi via Tek Innovations for V3/VX would still fit properly. Even if changed, it’s unlikely they wouldn’t have a plexi for it in the near future.

Bottom Padding/Feet-
=No padding
=Four small rubber feet

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons
=Signal/Ground wires are soldered on to buttons

PCB-
=Common ground PCB (Same as HRAP 4 Kai/HRAP.V/DoA5LR)
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
=Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector

Wiring-
=Typical

USB Cable-
=Wire and cord compartment
=Cable length (3m)

Unanswered Questions Due to Insufficient Testing-
-Is the PCB possible to multi-mod with? We know it’s common ground, but we don’t have if is active high/low.

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-01.png

Hori RAP4 Premium VLX
=Real Arcade Pro 4 Premium VLX Kuro for PS4 & PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/195793/the-hori-ps4-vlx-thread/p1

Case-
Hori VLX Case (Same as VLX models for PS3/360)
=Sizes - Width = 570mm, Depth = 260mm, Height (including lever) = 140mm
=Weight (5.4kg/11.9lbs)
=Interior of case has plenty of space for mounting PCBs
=PS4 touch panel on back of case

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing

Bottom Padding/Feet-
=Padding

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons

PCB-
=Insuffiecent testing

Wiring-
=Typical

USB Cable-
=Wire and cord compartment
=Cable length (3m/9.8ft)

Unanswered Questions Due to Insufficient Testing-
To Edit

2

XBox 360
XBox 360
XBox 360
XBox 360
XBox 360

Spoiler

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAPEX-01.jpg

Hori RAP EX
=Hori Real Arcade Pro. EX

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TM-8T-SK-K

Buttons-
-HORI stock buttons
-Alternate button layout has been reported and promo photos can be seen where A B X Y are on P2-P3 and K2-K3 instead of P1-P3 and K1. Unsure if this was regional, prototypes that slipped thru the cracks, or limited run before Microsoft required change etc.

PCB-
-Not common ground
=same as HRAP EX/EX-SE/EX-SA

Wiring-
=Unknown

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-EX-SA-01.jpg

Hori RAP EX-SA
=Hori Real Arcade Pro. EX-SA

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TM-8T-SK-K

Buttons-
+Sanwa OBSF-30, OBSF-24

PCB-
-Not common ground
=same as HRAP EX/EX-SE/EX-SA

Wiring-
=Buttons are quick disconnects, Joystick is individually soldered microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=Do we have details on the PCBs? CommonG/SecondaryButtonPCB etc?

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAPEX-SE-01.jpg

Hori RAP EX-SE
=Hori Real Arcade Pro. EX SE

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels
+Easy Top Panel access through Hex key
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Seimtisu LS-32-01

Buttons-
+Seimitsu PS-14-G, PS-14-D

PCB-
-Not common ground
=same as HRAP EX/EX-SE/EX-SA

Wiring-
+Buttons are quick disconnects
-Joystick is individually soldered microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-DoA5-360-01.jpg

Hori RAP Dead or Alive 5
=Hori Real Arcade Dead or Alive 5

Release date: 2012

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
= Unique door over recessed mounting for Start button slides into pocket within case when opened.

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF

Buttons-
+Sanwa OBSF-30

PCB-
=Both common ground

Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector

USB Cable-
=USB 2.0
=Plastic door cord compartment

http://www.frankcastleaz.com/images/tt/RAP/Hori-D-01.jpg

Hori RAP Deathsmiles
=Hori Real Arcade Pro. Deathsmiles Stick

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs

Metal Panels-
+Both top and bottom metal panels
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TM-8T-SK-K

Buttons-
-HORI stock buttons

PCB-
-Not common ground
=same as HRAP EX/EX-SE/EX-SA

Wiring-
+Buttons are quick disconnects
-Joystick is individually soldered microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAPDIIX-01.jpg

Hori RAP Deathsmiles IIX
=Hori Real Arcade Pro. Deathsmiles IIX Stick

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels
+Namco NOIR Layout

  • Two-point Joystick Mount (Seimtisu VF/JLF Wings)

Plexi/Art-
=No default plexi
=Plexi options available NOT AVAILABLE at Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TM-8T-SK-K

Buttons-
-HORI stock buttons

PCB-
-Not common ground
=same as HRAP EX/EX-SE/EX-SA

Wiring-
+Buttons are quick disconnects
-Joystick is individually soldered microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAPMF-01.jpg

Hori RAP Mushihimesama Futari
=Hori Real Arcade Pro. Mushihimesama Futari Stick

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
+Exclusive green case

Metal Panels-
+Both top and bottom metal panels
+Universal Joystick mount

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Seimtisu LS-32-K-SS2

Buttons-
-HORI stock buttons

PCB-
-Not common ground
=same as HRAP EX/EX-SE/EX-SA

Wiring-
+Buttons are quick disconnects
-Joystick is individually soldered microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-OG-01.jpg

Hori OG
=Hyper Stick Pro Otomedius Gorgeous Ver. (Konamistyle Limited Edition)

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (_______________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
=Sanwa JLF-TM-8T-SK-GT-B (Octogate)
+Uses Yamatake MS-Y-3 microswitches (not Omron)

Buttons-
=Sanwa OBSF-30, HORI 24mm

PCB-
=Touch screen
=PCB must be unique from other versions of RAP due to touch screen

Wiring-
=Joystick has individually soldered microswitches
+Buttons are quick disconnects

USB Cable-
=USB connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP-SCV-360-01.jpg

Hori RAP Soul Caliber V
=Hori Real Arcade Pro Soul Caliber V
-Released in 2012 with Soul Caliber V

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
= Unique door over recessed mounting for Start button slides into pocket within case when opened.

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF

Buttons-
+Sanwa OBSF-30

PCB-
=Both common ground

Wiring-
=Button s have quick disconnect wiring
=Joystick has 5-pin JST connector

USB Cable-
=USB 2.0
=Plastic door cord compartment

http://www.frankcastleaz.com/images/tt/RAP/Hori-Tekken6-01.jpg

Hori RAP.EX Tekken 6
=Hori Real Arcade Pro.EX Tekken 6

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Black base

Metal Panels-
+Both top and bottom metal panels

=No default plexi
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
=Type of joystick unknown (Black balltop)

Buttons-
=Type of button unknown (1Red/1Blue/1Yellow/1Green/4Black)

PCB-
=Same as HRAP.EX (Assumed)

Wiring-
=Unsure if buttons are quick disconnects or soldered to PCB
=Unsure if joystick is 5-pin harness or soldered to microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP-TTT2-360-01.jpg

Hori RAP Tekken Tag Tournament 2
=Hori Real Arcade Pro Tekken Tag Tournament 2

Release date: 2011

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Unique door over recessed mounting for Start button slides into pocket within case when opened.

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF

Buttons-
+Sanwa OBSF-30

PCB-
=Both common ground

Wiring-
=Button s have quick disconnect wiring
=Joystick has 5-pin JST connector

USB Cable-
=USB 2.0
=Plastic doored cord compartment

XBox One
XBox One
XBox One
XBox One
XBox One

Spoiler

to edit

Unreleased
Unreleased
Unreleased
Unreleased
Unreleased
Contains arcade sticks that saw development but were never released on any retail scale

Spoiler

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP-StockingMatsui-01.jpg

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP-StockingMatsui-02.jpg

“STOCKING Matsui” HORI Real Arcade Pro
-HORI built a special Real Arcade Pro. for use by STOCKING Matsui, a Tekken player, for his trip and participation in Evolution 2005
-Only 1 is known to exist, making it the most limited edition Real Arcade Pro.

Article sources-
Conception: http://www.itmedia.co.jp/games/articles/0508/09/news011.html
EVO2005: http://www.itmedia.co.jp/games/articles/0508/19/news044.html

Case-
RAP Base
=Weight (2.6 kg or 5.7 lbs)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
+Philips Top panel bolts, can be opened with a 100yen coin
+Exclusive RED case

Metal Panels-
+Both top and bottom metal panels
=turbo panel was eliminated
+Namco Layout (Similar to Japanese Tekken 5 HRAP)

Plexi/Art-
+Custom HORI-made overlay with custom Art

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Sanwa JLF-TP-8Y-SK

Buttons-
-5x Hori buttons, 2x 24mm Hori buttons
-Hole Plugs on 3 slots

PCB-
=Standard RAP Playstation 1/2

Wiring-
+Buttons are quick disconnects
+Joystick uses 5-pin connector

USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAP-EXRS1-01.jpg

Hori RAP EX RS-1
=Hori Real Arcade Pro. EX RS-1
=Radiant Silvergun licensed stick (meant to co-incide with the XBLA remaster)
-Product cancelled and never saw production

SRKTT thread-
=Unknown

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Seimtisu LS-32-K-SS2

Buttons-
+Seimitsu PS-14-G, PS-14-D

PCB-
=Never saw production

Wiring-
+Buttons are quick disconnects
-Joystick is individually soldered microswitches

USB Cable-
=USB 2.0
=No cord compartment

Unanswered Questions Due to Insufficient Testing-
=TO EDIT

http://www.frankcastleaz.com/images/tt/RAP/Hori-RAPAXSD-01.jpg

Hori RAP AX S+G
=Hori Real Arcade Pro AX S+G
-Product cancelled and never saw production

SRKTT thread-
Hori Real Arcade Pro AX S+G

Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier

Bottom Padding/Feet-
=No padding
=Four rubber feet

Joystick-
+Seimitsu LS-32-01

Buttons-
+Sanwa OBSF-30RG

PCB-
=Never saw production

Wiring-
=Never saw production

USB Cable-
=USB 2.0
=No cord compartment

CURRENT TO DO LIST

-All sticks with Hori’s 2nd main RAP base model (VX/V3/V4/V4Silent/KaiVariants/etc) for 360 and PS3 and XB1 (PS4/PS3 versions already listed)
-All sticks with Hori’s 3rd main RAP base model (DoA5, TTT/etc) for 360 and PS3 (some already done via NENDO)
-All XB1 sticks with 4th and 5th main base model (HRAP.V Hayabusa/whateverelse)
-Colors of all cases, buttons, and balltops listed on each stick
-Add release dates to each description
-Hori Virtua Fighter 5 Final Showdown (Hori base 2) - PS3
-Hori Virtua Fighter 5 Final Showdown (Hori base 2) - 360
-Hori Arcana Heart 3 (Hori base 2) - PS3 photos- http://n10248.info/stick_collection
-Hori Arcana Heart 3 (Hori base 2) - 360
-Hori Aquapazza (Hori base 2) - PS3
-Hori Wireless RAP Pro.V3 SA for PS3 (Japan Import) - http://www.amazon.com/Wireless-Arcade-Pro-V3-PlayStation-Import-3/dp/B00D2MQL10
-Hori RAP v3 SE BlackGreen for PS3 (Japan Exclusive) - [details=Spoiler]http://i.imgur.com/nGg02H8.jpg LS-32-01 stick
PS-14-G buttons for Square, Triangle, X, Circle, R1, R2, L1, L2
PS-14-D for start button
-Go through all of the HRAPs that have easy access screws from top as many are incorrectly labeled.

Link: http://www.amazon.co.jp/【Amazon-co-jp限定-カラー】リアルアーケードPro-V3-SE-「ブラック×グリーン」-PS3用/dp/B004K6KMJO/ref=sr_1_44?s=videogames&ie=UTF8&qid=1427246650&sr=1-44&keywords=リアルアーケードpro
[/details]

Referring to the EX-SA 360 Needs edit—

How To

How to install a Seimitsu LS-32 joystick in HRAP v1 and v2 models:

HRAP version 2:

Spoiler

http://i.imgur.com/ERyoUwe.jpg

http://i.imgur.com/xlCGAlN.jpg

HRAP version 1:

Spoiler

When mounting an LS-32(-01) or LS-40(-01) to this stick, use the Seimitsu SS mounting plate. This will ensure the correct mounting height to the HRAP.

Required tools: Phillips screwdriver, Metric tap wrench (4M, 0.7mm pitch)
Suggested tools: Metric nut driver (to remove the fastening nuts/washers in the HRAP), Vampliers/Neji-saurus pliers (to remove some of the difficult stock mounted screws on the JLF, or in case the screws strip while being unscrewed.).

An example of a metric tap wrench:

http://i.imgur.com/zExjgs4.jpg

  1. Remove the rear panel of the HRAP body. Suggest using a metric nut driver to remove the fastening nuts and washers from the mounting screws once the back panel is removed.
  2. Once the fastening nuts/washers are removed, remove the mounting screws and gently lift the front panel from the HRAP body.
  3. The stock mounted JLF will be mounted as pictured:

http://i.imgur.com/H1hz5Eh.jpg

Remove the screws using a Phillips screw driver.
4. With the screws removed, use the tap wrench to “drill” the proper sized screw holes in the areas circled below:

http://i.imgur.com/rPeQVbB.jpg

  1. Place the SS plate atop the newly prepped screw holes and proceed to mount the LS-32/LS-40 stick.

White Amazon JP HRAP3 does have the same plate as the original HRAP3. Thus LS-32s and LS-40s are a no-go, but 56/58 models can be mounted. See the picture below:


Definitely the plate from the HRAP1 version 2 and regular HRAP3.

BELOW SPOILER TAG IS FOR INFORMATION THAT I HAVE NOT YET BEEN ABLE TO SORT THROUGH OR UTILIZE IN FINDING INFORMATION

[details=Spoiler]Modding the sticks:

Original and CFJ:

  • Replacing the stock buttons w/Sanwa pushbuttons: Simply open up the HRAP, remove the quick disconnects off the Hori buttons, pop the buttons out, then put in the Sanwa pushbuttons, hook up the quick disconnects to those and booyaa, you got yourself a HRAP fully equipped with Sanwas. Recommended buttons for this switcheroo are Snap-ins due to the Metal Panel, but Screw-ins should work too.

HRAP1 version 2:

  • Replacing the buttons is almost the same as the OG HRAP and CFJ HRAP, but the QDs are slightly harder to remove for some reason. So here is a diagram on how to remove them to avoid having sore hands (kudos to spoon for the diagram):

http://img107.imageshack.us/img107/8209/qd9xd.th.jpg

HRAP2:

HRAP3 and its variants, HRAP1B:

US Tekken 5 Hori Stick:

How can I put custom art on my HRAP?
http://forums.shoryuken.com/showthread.php?t=107975&highlight=eggy

Where can I buy a HRAP?:

Can I still buy a Special Addition or Special Edition HRAP?

  • At this moment in time, your best bet would be either ebay or Yahoo Japan or any other auction site.

Resource posts with info not yet sorted through-

http://stick-wiki.wikidot.com/hori

[/details]

3

placeholder

4

placeholder

5

placeholder

6

placeholder

7

Can’t seem to track down an official Hori press release, but it looks like there’s going to be Silent version of the PS4/PS3 Real Arcade Pro.V

PlayAsia.com has a release date of 4/23/2015 for their preorders.

8

Even though I had that listed in the PS4/PS4 Retail Arcade Sticks List I didn’t have it listed here. Thanks for the heads up.

9

Can I suggest using spoilers in the OP? Makes the post much easier to traverse.

Re: Silent HRAP, any word on if they’re making one in the Kai configuration? I feel like that would be the ideal stick for me.

10

Lol

11

Will take your suggestion into consideration.

As for a Silent Kai version, we have no idea as they haven’t announced anything as such.
Making an existing Kai stick into a Silent isn’t that difficult though. With optical PCBs and silencer pads, you’d likely be able to do it for the same or a lesser cost than if Hori produced it and marked it up accordingly.
Check [THIS THREAD](HayabuSilent? Silentbusa? Hayabusa Optical Mod, ahoy! to see what joystick PCB options you have. No idea if Hori has released the optical PCB individually.

12

Thanks! Was looking up some different options a while back, but didn’t want to commit without doing all the necessary research. I’ll check that thread out.

13

@FrankCastleAZ: I saw your post in the other thread, and yes, they are labeled for the alternate layout. The sticker on the bottom says it’s an HX3-10, for reference.

14

Hey, @FrankCastleAZ. I can confirm that the HRAP3 SA uses hex screws for it’s top panel, not a bolt/washer/nut combo like in the original HRAP3. Meaning that this allows for easy access to the top panel. This can even be seen in the stock photo you provided for it. In fact, a lot of these sticks mention not-so-easy top panel access yet their pics show them having hex screws for their top panels.

Because I thought otherwise, I bought HRAP top loaders, thinking I would need them for my HRAP3 SA. But since they were cheap, and I don’t mind supporting Arthur, it’s not a big deal.

15

Resized/Edited photos at 500x500 and made sure correct system photo was listed under each console for the following sticks:
-Hori RAP N3 SA PS3
-Hori RAP DoA5 PS3
-Hori RAP MSGE VS
-Hori RAP MSGE VS FB
-Hori RAP SCV PS3
-Hori RAP TTT2 PS3
-Hori RAP SCV 360
-Hori RAP TTT2 360
-Hori RAP StockingMatsuri
-Hori RAP EX RS1
-Hori RAP DoA5 360

Still need to do XB1 sticks especially now that the HRAP V Kai for XB1/360 is being released

Noted to do in the future on post 2.

Done. Although I will likely edit a bit more and still list titles below the consoles.

Apologies for your purchase based on information I’ve gathered. A lot of what is listed is copy/pasta as sorting through the information is rough.
If you’re able to go through and make a list of the top panel access sticks so I can edit the posts it’d be greatly appreciated. If not, it’s something I have on the list on post 2 to get done eventually.

16

Hi I checked the SFIV edition, PCB is common ground and Joystick uses a 5-pin harness. I’ll try to provide pics when I am back home using my own computer

17

Didn’t know where to post this so I put it here & on the PS4 VLX thread:

Anyone have additional info on this new version?

http://www.play-asia.com/real-arcade-pro-v-premium-vlx-hayabusa-for-playstation4-playsta/13/709mi5

They’re pre-selling it for $235 plus shipping (only one option @ $59.90 to Texas). Trying to figure out why it’s much less than the original PS4 VLX ($300). Other than the different color themes on side & top panels, I can’t see any other differences. Would prefer to buy in the states to avoid overseas shipping cost. About to inquire with both Hori USA & Arcade Shock. I should’ve just bought 1 PS4 VLX originally instead of 2.

18

The new feature is that it uses the new Hayabusa buttons. Unfortunately, I don’t see a switch for XInput (PC), a feature that is in the new HRAP.V Hayabusa and HRAP.V Hayabusa Silent.

19

There’s no XInput in the ver.1 of the HRAP V Silent.

20

I know. I meant the new version of the HRAP.V Hayabusa Silent.