Thanks for your help again Imitrex! All set! Cheers!:wgrin:
Just making sure, an HRAP 3 will definitely work for the PC right?
It’s not like the HFS 3, where you can use it for the PC but only if you’re lucky (and only after digging through the entire internet for drivers)? I need a super guarantee here. I hate returning stuff I bought online, and with the HRAP 3 I’ll be $100 under in shipping charges if it doesn’t work. Even if it’s not exactly plug and play, I want to at least know that there are drivers out there that are guaranteed to work (for Windows XP 32-bit).
Help much appreciated.
I would say because it’s as accurate as you can get to an astro city cab without owning one.
Sorry if this is out of topic but since you guys have good knowledge of joysticks, i have a tekken 5 hori stick (UNmodded) and i use a ps2 to usb adapter and i wanted to know why i can’t kara grab /kara. I can only do it 10% of the time when its quite strange that at the arcade with happ buttons i can kara grab and itll come out 90% of the time, is it the adapter or buttons that prevents me from executing this more often? I tried the search button guys but the key words kara-ps2 stick is too wide, any help would be appreciated
Unless your converter is crappy (lags/can’t read multiple presses/etc), its either an execution problem, or the timing for mame is a bit off for you. IIRC, MAME runs 3s slightly slower than the arcades. Just sit there and practice.
i was wondering i bought a US T5 Stick at a local swap meet for like 20 bucks, i wantedto know if you can take out the PCB and replace it with a PS1 wired PCB
Yes sir, but why? The T5 PCB is pretty good. I haven’t had any troubles with it yet. Works fine with my converters too.
cause i want to mod the buttons and i’m too lazy to put the T5 PCB back on :smokin:
Pretty sure it will work no problems. If anything you’d have to use the Ps3 Controller drives or Joy2key or whatever and I highly doubt that. In fact when you plug it in it should say like, “Hori Real Arcade Pro 3/Hori Arcade” or something along those lines and it might even register under the ps3 controller.
Hello, i am new to the forum and this is my first post & a question 
Is it possible to change the Sanwa Joystick in HRAP 3 for a seimitsu LS-32-01?
The first post explains quite a bit.
HRAP 3:
- For PlayStation 3 and PC
- USB wired
- Will be released on the same day as VF5 in Japan (February 8th, 2007)
- Retails for 8,379?
- Sanwa JLF-TP-8Y-SK
- Hori Buttons
- Uses quickdisconnects
- Turbo Button with three level settings: Slow, Normal, Fast
- PlayStation Button to bring up the XMB
- The HRAP has a switch that emulates at any given time either: the digital pad(default), Left analog, or right analog
- Mesh top
- Black/Metallic colour scheme
- Button layout is Japanese arcade cabinet layout
- Button placement:
[] /\ R1 L1
X O R2 L2 - The mounting area is altered like the HRAP1B, so no go with the LS-32.
- Pic:
http://www.watch.impress.co.jp/game/...213/hori02.jpg
yes it is, but not with a LS-32
Maybe a stupid question to some of you, but I can’t decide what colors for buttons and balltop would be the most stylish for a hrap3 because the faceplate isn’t really black.
-Buttons I want are Seimitsu PS-14-G or PS-14-K, can’t choose either
-Joystick is a Seimitsu LS-32-01, with or without LS-39 bubble ball
I was thinking white, green or orange for buttons/balltop and black for start/select
Your opinion?
Hah. I just got the same orange/black combo you are thinking about, with the PS-14-KN’s and bubble top. Unfortunately, still waiting on the HRAP to arrive to put them in.
The coloring is a little different between the bubble tops and buttons for some reason. If you want an exact match, go with the solid colors. What I may end up doing, is getting some fake carbon fiber looking paper to match the panel, or solid black, and putting them in the button tops to darken the over all scheme of the buttons. The white on the top tends to make the shades look different.
Not a stupid but a hard question, because the default color scheme is a good one already but if you have to change it then try this one; for the start and select buttons PS-14-D 24mm - blue/black. for the buttons PS-14-K 30mm DaiDai color, and finally for the balltop choose LB-39 blue or orange.
Thanks for your opinions, I think I’m gonna get a green LS-32-01 and an extra white bubble balltop, for 30mm buttons I’m gonna get green and white PS-14-K-N’s. I only have 1 more question: are the Dark Hai start/select buttons on the new HRAP2SA going sold seperatly like the 30mm?
Unfortunately, they are not available. Info obtained in this thread
http://forums.shoryuken.com/showthread.php?t=151350
i tried searching this thread… but couldn’t find the answer to my question:
does the HRAP3 pcb have a common ground? i want to construct a PS3/360 controller (ala the VSHG mods)… and a common ground is pretty much required.
thanks!
HRAP2s and T5s are common ground, so I would assume that HRAP3s are, but don’t take my word for it.