So I’m having issues with my hitbox and would like to hear some other peoples experience. I bought a hitbox with a ps360+ and I have been having issues with the USB port on the hitbox itself. It’s extremely loose and barely stays in. Now I bought an RJ-45 to USB cable to take advantage of that instead but it doesn’t actually get picked up by my computer. I get Unknown USB device(configuration Descriptor Request Failed). If anyone has had issues with either of these ports on the PS360+ or knows how to fix the RJ-45 to USB issue I would appreciate any insight. It may be the USB-B cable on my side since I did buy it from amazon and its not akishops actual usb. I still don’t think it should be as loose as it is however. Thanks for any help.
t
I could probably get a hold of one. My uncle is an electrician I’m guessing he has one.
I’'ll look into finding a smaller one. I currently have the 13 foot one and I felt like that one unnecessarily long. I should have also added the fact that it works fine on PS3 and Xbox360. It’s just PC that I am having the issues.
You were able to use it via the RJ45 cable? The USB b cable works but I just don’t like how loose it in as it often falls out. The firmware it says on control panel is PS360+ v1.66.
Hey guys you’re always welcome to come to us with questions over on hitboxes@gmail.com as well. I rarely have a chance to look at tech talk so if you have issues I’m always able to help over there!