Gonna start a new project (if you wanna call it that).
So I bought a Neo Geo X arcade stick a few months ago and for some reason it just feels like a piece of shit, I’ve never used an original NeoGeo stick so can’t really compare, I’ve DAFS and seems mixed opinion on the X stick.
So, since I want to use this for playing SNK games the good ol’ way but on newer platforms. I’m thinking of gutting it and putting the components of the venom inside so I can use it on ps3/ps4/pc . I’m aware that the buttons will need 24mm (im gonna go with Sanwa or Seimetsu) . I might even buy a new Sanwa Jlf as the venom stick is slightly broken (still fixable, though).
So, has anyone done this and does anyone have any tips. I’m guessing it’s just simply putting the venom pcb inside the NeoGeo X case and then wiring it up. I’m keeping with the 4 button layout for nostalgia effect but I dont even know which playstation 3/4 buttons would go in what order on the NeoGeoX stick case?
Plus I’m guessing I might need to cut some areas out externally for the turbo actions buttons/switches (Shmups) and drill a hole for the PS home button.
There’s not many topics/videos on YouTube in which people are modding the neogeoX stick. So should I purchase are aes original stick or would the X suffice, thoughts?
Also does anyone have any ideas in which I can make the stick heavier (i know ps3 dualshock controllers use silver rounded weights in the handles) but other than a metal base for an arcade stick for weighted effect I’m unsure what to do?
Long post so if TL;DR type just gimme some tips on the title of this post.
A stick case is as good as any stick casing; you don’t need a tutorial specific to your casing. Just make sure you plan and measure twice before you cut/drill.
The “weights” you talk about in Dual Shock controllers are part of the rumble motors.
For sticks, many people add additional weight using self-adhesive tire-balancing weights.
Some materials used in cheaper sticks still won’t live up to some of the higher end ones. That’s why I was asking incase the neogeo reproduction was any good. I mean, it feels lightweight and not very sturdy but I guess with some added weight you’ve recommended it should do the trick
As for the ps3 controller weights being for rumble purposes. Haha, my bad I thought it was for weight (smh). Well that answered that
Expanding on what FreedomGundam said about stick weight, yes. It has long been a trick of the trade among stick makers to buy some of those segmented, adhesive hobbyweights. And just stick them all around the bottom and sides of the stick. Adds weight nicely.
Great stuff man, the neogeoX stick is very very light so I’m not sure what type of weight would be good to add inside (also depending on the space available). 1kg?
As for the Neo Geo X stick. May I suggest making it into a normal Neo geo stick with a DB 15 pin connector and putting thePCB into a project box with a matching DB15 connector and any home buttons you need on the project box.
Getting a original AES stick? They are tend to be pricer, and often have cracked case plastic.
Original neo geo sticks; yes they seem to be more expensive and not many people selling in the UK so shipping from US or Japan would add unwanted shipping/custom charges.
The reason for a Venom pcb is merely because I have one lying about not getting any use and it’s ps4/ps3/pc as you’re aware. I neve considered the pcb being of low grade, as in what way?
As for making it a normal neo geo stick, Im not sure what you mean as I dont own a neo geo console, unless I’m reading it wrong and you’re suggesting to use it on mame/RasPi3 projects etc?
The only reason for the venom was because I can use it for neo geo games that I have on my ps4 (as some contain additional content) plus with the venom pcb I can use it anything ps3/pc too.
Surely the venom pcb for casual game play here and there will suffice?
It’s mainly the ps4 aspect if I’m honest, as I know additional adapters etc can raise the cost. I’m not too sure of parts such as the db15 connectors etc as never used them in projects.
Did you mean use it to play on a console or mame projects/pc?
@Darksakul was saying to basically rip the PCB out, take the contacts from the buttons, stick, and ground and wire it to a db15 connector (which is the neogeos console port). Just make sure to have the right pinout.
With that db15 connector you could make what is known as a project box. Which is basically a pcb to whatever console you want (like a Brooks UFB that works with PS3/PS4/X360/XBONE/SWITCH). You wire up the pcb to where the connections from your now db15 stick correlate with the actions on the board, then have the pcb plugged into the corresponding console and then you’re good to use your still on it (the great thing about project boxes are you can have multiple pcbs and have one stick to basically run on whatever you want as long as you have a working pcb for the console)
