Gummowned's modding services. Now Includes Xbox One and PS4 mods!

[NoChart]

Here’s a question, Gum: If I swing 3 Gamecube controllers and 3 peewii PCBs + Wii-mote extensions your way, how much would it cost to get those GC controllers modded for the wii/ wii u?

[Gummo]

Just a few questions…basically I’m trying to shrink my joystick collection. Most of why it’s so big is because I have sticks for every system, so the ability to use a few sticks on multiple consoles would really help.

If I have multiple sticks that I want modded, is there any sort of discount?

What additional consoles are supported by the $150 multi-console mod?

Are you at all interested in accepting other lightly-used joysticks/parts as part of the payment? I mostly have the smaller FightStick SE form factor because that’s what I prefer myself, but with Sanwa/Seimitsu parts.

Lastly, I have a Tekken 6 wireless Hori stick (for 360) and would like to put different buttons in (just buttons…I swapped the spring in the lever and I’m happy with it). I already have the buttons (they will fit) and was going to attempt it myself but…yeah, changed my mind. I would prefer them to be rewired with QDs so that I can swap them in the future, but if they’re soldered that’s acceptable. Is this something you would do? If so, how much would you want for it?

I might be able to give a discount depending on how many sticks you want modded.

The multi console mod would be compatable on PS3/360/pc/ps2/xbox orig/dreamcast via ps360+. If you need gc or saturn, I can use a MC Cthulhu instead.

I’m not interested in any sticks for trade in.

$30 to install the buttons with QDs into the T6 case.

Here’s a question, Gum: If I swing 3 Gamecube controllers and 3 peewii PCBs + Wii-mote extensions your way, how much would it cost to get those GC controllers modded for the wii/ wii u?

Wouldn’t be worth doing because the peewii doesn’t have analog stick support. Though I think the microchip on the peewii pcb could be rewritten with the gc->wii converter firmware. I’d have to check to see if the chip is compatible with it.

[PinoyPryde]

Hey gummo is it possible for you to hollow out an LS56 shaft to fit LEDs in it?

[Gummo]

Hey gummo is it possible for you to hollow out an LS56 shaft to fit LEDs in it?

No, you’ll need to purchase a hallow shaft. I can only drill the hile into the balltop to fit the led.

[yyr]

Thanks for your reply! I’ll go through my collection over the next few days, make some decisions and then PM you about what I need.

Edit: PM sent.

[Gummo]

Dual modded a PS3 Chun TE-S with a ps360+. Player leds wired up too.

http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/etalage/chun%20tes%202/th_IMG_20130918_204226_zps1b38af6a.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/etalage/chun%20tes%202/th_IMG_20130918_204420_zps2b5a2e3d.jpg

[Gummo]

Finished some work for yyr.

Button swap in a T6 stick
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/yyr/th_IMG_20131003_205026_zps3dd714db.jpg

Two multi-console mods to TvC sticks.
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/yyr/th_IMG_20131003_212648_zpse6e62225.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/yyr/th_IMG_20131003_212704_zps9f6a0517.jpg

http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/yyr/th_IMG_20131003_214019_zpsabc60bb4.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/yyr/th_IMG_20131003_214032_zpsb8c18ad4.jpg

[Gummo]

Finished making a dual modded pad out of a PSone controller. Uses a Cerberus for PS3 side and a cut up Madcatz TE pcb for the 360 side. Analog sticks only function on the PS3 side.
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/CharlieKun/th_IMG_20131016_171827_zpsa148999e.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/CharlieKun/th_IMG_20131016_175320_zpsa12d041a.jpg

[kazuyafan94]

Hey Gummo I have a question, I am planning on buying a PS360+ and would like to use the Home Button instead of using the Start and Select as Home, is there anything big I have to do make the Home button work or can I just wire it the way it is?

[Gummo]

Hey Gummo I have a question, I am planning on buying a PS360+ and would like to use the Home Button instead of using the Start and Select as Home, is there anything big I have to do make the Home button work or can I just wire it the way it is?

Just wire up Home on the ps360+ to your home button.

[kazuyafan94]

Oh okay, and another question. I have this idea of dual modding my HRAP3 with the PS360+ but to avoid drilling another hole for the home button, can I solder a ground and signal wire to the HRAP3 then connect the wires to the screw terminal?

[Foolinfection]

Hey Gummo I have a question, I am planning on buying a PS360+ and would like to use the Home Button instead of using the Start and Select as Home, is there anything big I have to do make the Home button work or can I just wire it the way it is?

Apologizes to gummo for being off topic regarding the thread.

But several people literally answered this very same question you made in a thread about it the other day. And it was answered in more detail. You don’t need to go around asking the same question everywhere when helpful people have already answered it for you.

Dual Modding an HRAP3

Everything on the board is pretty much labeled with some minor exceptions such as the alternate connections panel. (Do not use the alternative connector panel or the Alternative USB connection if you are unfamiliar with soldering) If you can match A to A, B to B and so on you can wire up a PS360+ You would cut and strip (about a 1/8 of a inch) from each wire and attach them to the appropriate screw terminal. You can use a USB type B plug to connect a USB cord to the PCB or a RJ45 network cabl…

[kazuyafan94]

Hey Gummo I have a question, I am planning on buying a PS360+ and would like to use the Home Button instead of using the Start and Select as Home, is there anything big I have to do make the Home button work or can I just wire it the way it is?

Apologizes to gummo for being off topic regarding the thread.

But several people literally answered this very same question you made in a thread about it the other day. And it was answered in more detail. You don’t need to go around asking the same question everywhere when helpful people have already answered it for you.
Dual Modding an HRAP3

Yeah I know several of you guys have answered my questions and I appreciate that but I just wanted to know if there’s another solution besides the answers you have given me. Considering Gummo is very well known for modding I thought it wouldn’t hurt to ask. Again I appreciate the many answers you have given me dude.

[Foolinfection]

Hey Gummo I have a question, I am planning on buying a PS360+ and would like to use the Home Button instead of using the Start and Select as Home, is there anything big I have to do make the Home button work or can I just wire it the way it is?

Apologizes to gummo for being off topic regarding the thread.

But several people literally answered this very same question you made in a thread about it the other day. And it was answered in more detail. You don’t need to go around asking the same question everywhere when helpful people have already answered it for you.
Dual Modding an HRAP3

Yeah I know several of you guys have answered my questions and I appreciate that but I just wanted to know if there’s another solution besides the answers you have given me. Considering Gummo is very well known for modding I thought it wouldn’t hurt to ask. Again I appreciate the many answers you have given me dude.

I’m just saying something before a mod does. Posting the same thing over and over can be considered spam. If you have any questions for other people tag them in your thread to notify them or you can just send them a PM.

[kazuyafan94]

Hey Gummo I have a question, I am planning on buying a PS360+ and would like to use the Home Button instead of using the Start and Select as Home, is there anything big I have to do make the Home button work or can I just wire it the way it is?

Apologizes to gummo for being off topic regarding the thread.

But several people literally answered this very same question you made in a thread about it the other day. And it was answered in more detail. You don’t need to go around asking the same question everywhere when helpful people have already answered it for you.
Dual Modding an HRAP3

Yeah I know several of you guys have answered my questions and I appreciate that but I just wanted to know if there’s another solution besides the answers you have given me. Considering Gummo is very well known for modding I thought it wouldn’t hurt to ask. Again I appreciate the many answers you have given me dude.

I’m just saying something before a mod does. Posting the same thing over and over can be considered spam. If you have any questions for other people tag them in your thread to notify them or you can just send them a PM.

Sorry about that, I’ll keep that in mind next time dude.

[Ghudda]

Gummo made some RJ45 Sega Saturn and Dreamcast cables for me. Great dude and easy to work with. Thanks again buddy!

[kairu1]

pm’d

[Jayducky]

Packages on the way! let me know once you get em. Thanks Gummo!

[Jayducky]

Hi Gummo. I want to know if you got the 2 packages I sent you? USPS Tracking says that the packages were delivered to your address on November 2nd at 4:51pm. It’s November 6th and I haven’t heard anything from you. Thanks.

[Gummo]

Hi Gummo. I want to know if you got the 2 packages I sent you? USPS Tracking says that the packages were delivered to your address on November 2nd at 4:51pm. It’s November 6th and I haven’t heard anything from you. Thanks.

I’ve been out of town for youmacon this weekend. Ill be back home today.
My roomates have brought in the packages.