Gummowned's modding services. Now Includes Xbox One and PS4 mods!

Trading Outlet
981

Finished a pad mod for Jason24cf. I dual modded his Hori Fighting Commander 3 Pro. I also swapped the R triggers with the L triggers, replaced the player led with blue leds, and made the player indicator also work on the 360.

http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/jason24cf/2011-11-07175503.jpg

http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/jason24cf/2011-11-07175657.jpg

982

Hey gummowned. Is it possible to dual mod a ps3 dualshock? If not, how much is a Hori Fighting Commander 3 Pro dual-mod?

983

Sort of. I’ve only made one dual modded sixaxis pad. The analog sticks dont work because I basically removed the original sixaxis pcb and replaced it with a 360 TE pcb and dual strike smd (both pcbs dont have analog stick support). So yes its possible, but I’m not offering it as a service just yet.

HFC3 Pro dual mods are $120+ shipping. I have a pad already I can supply for $35.

984

Alright, thanks for the info. I’m not sure if the fella who wants this done will dig the HFC3 Pro dual mod. We’ll see how he likes the design before I commit to anything. I’ll hit you up for it if he decides to roll with it.

985

Yay me, I’m doing art’s and crafts! I’m making Sanwa keychains. I’m selling them on ebay.

986

hahaha sexy…

987

Reduce, Reuse, Recycle. Im glad to know those Brawl sticks wont be in a landfill. :slight_smile:

988

We have our own coming out too.
Laugh.

Coolness.

989

Hey Gummowned, can you dual mod a xbox 360 stick to play on DC? If so how much would something like that run me?

990

He can do anything.

991

$100+shipping. Would fall under the multi system mod.

992

Hey my VA brotha I got a pad you need to check out


its common ground and no need for a hex just two 10k’s
it might be beast for some pad hacks $26 at brick and mortar walmart
let me know if there something you want me to test out on it

993

Thanks for the tip :slight_smile:

994

Thanks for the email help the other day!

995

Hey Gummowned, I have a stock VSHG and I need a new PCB for it. (the factory PCB doesn’t like multi-button inputs.) I would like a PCB that works for PS3 & xbox360. If I have a Paewang PCB sent to you, could you solder up all the wires to the PCB. I would also send you the original wires & 5pin joystick harness from the VSHG as well. The only problem is this: I want the VSHG to look stock on the outside. i.e. no extra buttons drilled in to the case. the Paewang pcb requires you to press and hold the turbo button to change systems. There would be no Turbo button on the VSHG to press. Having the turbo function working would be nice since this is my shmup stick. I would also like to use the stock VSHG USB cable. I was waiting for the PS360+ but… Do you have a better solution to this and how much $ am I looking at + shipping? Thanks Gumms!

996

Provide the parts you want installed and it will be $50 + shipping. Shipping would be between $11 and $15 if shipped ground.

I can wire up select to be both select and turbo.

997

OK, sounds like this might work. I have a few questions before I follow through:

  1. The USB wires are different colors. When I install the Paewang I will have to fuse the appropriate wires together. Is there any room for error when doing this? i.e. will the PCB blow up if I don’t have the appropriate wires fused together? See images below (top: Paewang Bottom: VSHG)
    I want to keep the VSHG USB cable and discard the joytron USB cable. There seems to be 2 black wires in each strand. Does it matter which black wire attatches to which black wire?
  1. The daughter board on the VSHG is responsible for PS, SELECT, L2 & R2. Since the Paewang is fully common ground, I will not have any issues wiring up to the one common ground line on the daughter board? When I hooked up a sixaxis to a VSHG, I could not get R2 to work because it had a different ground from PS, SELECT & L2.

I will order a Paewang next payday and PM you for your address & handle payment. Thanks Gummowned!

998
  1. ill be taking care of rewiring the usb cord so you dont have to worry about it.

2)since they are both cg there wont be an issue.

999

OK so I am sending:

  1. Paewang PCB
  2. Button & joystick wiring
  3. VSHG USB cable
  4. VSHG main PCB & daughter board

For ground to the buttons, are you going to daisy chain or will there be a ground wire going to each button. Just curious.

1000

daisy chain.