Its already been done. It was one of the first things I did when I got the Dual Strike SMD boards made. Bencao also did the same thing when I gave him one. I believe Phreakazoid was the first to dual mod the fightpad with a cthulhu and imp.
pm sent.
Finished iloveu’s stick. Its a PS3 Comic Con TE given the RJ45+MC treatment.
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-24205841.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-24210808.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-24221207.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-24221225.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-24221254.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-24221321.jpg
360->MC Cthulhu+imp with attached cords for systems the MC supports: $100
If I got this, what cords would be included?
Besides the original usb cord (to be used for ps3 and 360) you would have to choose one other system the mc supports.
The rj45 mod would come with 3 detachable cords.
gummowned I sent you a pm, thanks.
hey, do you happen to have just a regular ps2 pcb?
i have a stick, and i want to hook it up. I just need a relaible ps2 pcb with the wires soldered .
I have two ps2 pcbs that came out of the T5 sticks. I can also source psx pads for use in modding sticks for ps2.
I’ll be providing neutrik boots to the detachable cables now.
If you get the MC + rj45 mod done, just add $10 extra for each cord you want the neutrik boot added to.
If you just need to get the cables by themselves, they are $20 per cable. Cables without the boot are $10 each.
Received and finished Osirun’s stick today. R2 360 TE -> MC + RJ45 mod. A small button is installed next to the start button to be the select button. Turbo panel is being removed so I made start+select=home.
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-28194750.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-28195739.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-28194806.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-28200903.jpg
Hey Gum, I’ve asked you a few questions before, but I’ve narrowed it down to two options, but I definitely want to go with either of them.
I am ordering a 360 Round 2 Stick this weekend, and I was wondering if you could give me your shipping information and paypal info so I can just have it shipped to you. Here are the two scenarios I was possibly looking for, I want to know which of these you can do:
1)I would like a 360->PS3/360 Mod using the Cthulhu (99% sure this is the standard and shouldn’t be an issue).
- I was wondering if this was possible: If you do the “360->MC Cthulhu+imp with attached cords for systems the MC supports: $100” can you have all the cables (USB, PS1/2, GC) still come out of the hatch? If so, do you think the PS1/2 and GC cables could fit in the hatch TOGETHER when they are not in use? I just really don’t want a bunch of cables laying around (and cant really afford the rj45 route).
Anyways, I hope to hear back from you ASAP so I can order the Round 2 TE, get it shipped to you, send you the paypal, and then have the mod done soon as possible. Also, I would need to know how much shipping will be to 32304 from your place back to mine.
Thanks!
Felipe
If I’m not mistaken, option #2 requires the RJ45 jack in order to use for all those systems you listed. The cables you want would have to be RJ45 cables on one end and the console of choice on the other.
If I were you, I’d most likely go with the RJ45 route (option #2) just so you get more bang for your buck.
BTW- I don’t think all those wires will fit in the cable compartment of the TE. Sorry for putting my 2 cents in. I know the question was for Gummy. Sorry…
Gummowned’s modding services
No worries, just wanted to see if it would work :). Do you think the ps1 cable would fit alone in the hatch?
That hatch will only fit one cable set at a time. You could probably put the cables on the bottom compartment of the TE. The only annoying thing is that you’d have to unscrew the bottom panel everytime you wanted to switch the cables. If you did that, you could have one cable plugged into a console, have another one in the cable compartment and another two more cables inside the bottom compartment of the TE.
Added Madcatz 360 Fightpad dual mod service to the list.
Hey Gummowned…I shot u an email to ur gmail address, just in case u don’t check ur email often. It’s from Leonica14…thanks.
Is it possible to have 2 cords attatched?
Also, if I get the rj45 mod would you be able to make a DC detachable cord?
It’s possible to have two cords attached.
for the rj45 mod a dc cord can’t be detachable
So would it be possible to get “360->MC Cthulhu+imp with attached cords for systems the MC supports” with ps1/ps2 and DC cords attached? If so, how much?
If i’m local do I still have to pay the shipping? Im 15 mins away from you ;x. Well i need a 360 TE dual modded to work on a PS3. That’s all i need. So $80 will cover that?
It would be possible, but adding DC would cost extra since it would be adding another controller board to the stick. $130 is what you’re looking at.
you can just drive on over and I’ll mod the stick then and there. $80 covers everything and you can play some ssf4 while you wait (1 hour). PM me if you are still interested and I’ll pm back my address and phone number.