Just curious, MightyMackinac’s stick, was it already dremeled and came with the stick and buttons, or you did that too?
It was already drilled and installed with the button and stick. Otherwise I wouldn’t of been able to finish the mod the day I received it and shipped back the next day.
Provided with an 360 and layout template, I could still do it from scratch though.
Read the topic from page 1 and up. Good stuff man, it’s nice to see there’s still quality work put into this kind of thing in the time and age we’re at now.
I don’t know what boards are for what, so I’ll just noob up my question: How much would it cost to put GC compatibility in my “S” TE PS3 stick?
There’s a few different options besides using the MC cthulhu board if you just want to add gc/wii support. I’ll give you a pm with more details.
PM sent.
Finished robotchop stick. Was a rewiring of a wireless 360 board in a custom case that is for lefties. RT is trigger hacked so the buttons can now match the TE mapping.
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-05151544.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-05151822.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-05-05151837.jpg
o_0! very interesting. Did you run the battery pack to the + and - battery terminals and then just connect the PnC cable to charge everything?
The 4 contacts on the PnC battery is wired to the 4 spots on the 360 board.
Dude that looks awesome!!! I can’t wait to get. Thanks a lot!
i have a hori ex2 stick for 360.
one of the ones that was released when sticks were barely being made for it.
can you mod it?
i can pm message you the details if need be.
thank you very much for your time.
I can mod it. Please pm me details on what exactly you would like done.
I did the dremelling myself, and put the buttons and joystick in myself…
A suggestion for anyone who might want to try this: Take the metal cage out of the case and don’t use it! It’s thick and a pain in the rear to cut.
@Gummowned…Just got my stick in the mail today! Works great! There was one thing that I noticed, don’t know if you knew, but when you press a button and the arc-eyes light up, the joystick led doesn’t…I’ll post a video here in a little showing you what i mean and to show off the awesome work you did! Thanks a ton!
i want to get my stick modded to play on many consoles. i live Connecticut, is there anyone close by that location that can mod my stick with these type of services?
PM sent.
Gum,
I want to use my Xbox360 on my arcade New Astro City cab, can you wire up something like this so I can use Sanwa JLF or Seimitsu LS 32-01?
Yes I can pad hack a wireless 360 controller with QDs and wire harness. I can also trigger hack it. All for $80 + $6 shipping. You’ll have to provide your own PnC kit yourself though.
Also if anyone is interested, I have 5 neutrik rj45 boots in stock.
Beast Modding Services
Have you seen the case that houses the PCB in Hori’s VLX? Im wondering if I could send you the case w/ PCB and you fit a chimp inside and I would solder the 4 wires to the chimp.
http://shoryuken.com/showthread.php?t=223927&p=8694194&viewfull=1#post8694194
http://shoryuken.com/showthread.php?t=223927&p=8717852&viewfull=1#post8717852
Gum,
I have a ps3 madcatz SE with a dead pcb, a 360 pad, and a chimp assembled here…would you be able to take it and put in the chimp in with the 360 pad? Could you give me an estimate on price for that?
I’ve never seen that stick yet so I don’t know if a chimp board would fit inside the box or not. I know I could drill a hole in the box and have the wires go inside. I know if I used my Dual Strike SMD board instead of a chimp then I for sure know I could get it to fit inside.
I can do it for $40 + shipping.