Gamester Reflex Arcade Stick programming woes?

Tech Talk
1

I recently picked up a 2nd Hand Radica Gamester Reflex Arcade Stick for X-Box. But it came with no instructions >:(

Just under the stick it has 3 buttons to program in moves. It a has a “PX” button that flashes and an “S1” and “S2”

Has anybody out there got this stick and knows how to use these buttons and program in combos and moves?

2

I have one of these still in the package unopened as a replacement pcb incase any of current stick pcbs go bad. I will try to see if I can take a picture of said instructions and post it.

3

That would be awesome Buyproduct :woot:

Cheers

4

Sorry it has taken so long but my camera battery has died and I cannot find the charger. But here I will attempt to reproduce the instructions.

Programming instructions:

  1. Press Program. (Px)
  2. Press the button you want to program. (S1 or S2)
  3. Press the buttons you want to use in the programmed sequence in the order they are used in the game. Where a delay or gap is required between button presses, the “BACK” button is used
  4. Press Program. (Px)

Notes:
a: If you want a longer press or longer gap then press the action button more times to acheive this.
b: Each button press represents 1/20 second.

Use the following programming sequence as an example:
Programmed sequence: (Px)(S1)(A)(BACK)(X)(X)(B)(BACK)(B)(Px)
Result in game: short a move, GAP, Long X move, short B move, GAP, short B move

Hope this helps