just waiting on ur pdfs.
cant wait:rock:
All emails replied with pdfs attached.
If the pdf is missing, let me know please.
E-mail sent!
Email replied!
Hey mang, I set up the photoshop file so you can customize it. vocal, you remember where that file was posted? I canāt remember for the life of me. Anyways, every general area of color is separated onto different layers. You can just click on the layer and the little eye symbol on each layer to see which layer corresponds to what area.
Use the paint bucket tool to fill in the desired color. The colorway you describe is absolutely possible. And yeah, the graphic itself is total freeware.
Lemme know if you have problems.
I can cut out the metal and acrylic in that exact layout and you can print her out and put it on yourself.
Would look great on a T5 stick!
**BTW Most designs are confirmed and still tweaking a few.
Last day is the 22nd of Jan as these go into the factory on the 23rd!**
im still getting this done. just waiting on the artwork to be completed in the next couple of days. so just to be clearā¦the 22nd is my deadline correct?
You have about 2 weeks.
Hopefully all payments are in via paypal by 22nd.
I didnāt want to keep 12 people waiting so I set a deadline for payment. 22nd is a friday here so I send it to the workshop in the morning and I get it back a week later.
Email sent!!
Aznxtc,
Email replied! 
shubacca do you have one like this but with the vewlix logo on itā¦Thanks.
E-mail sent.
Vizard,
Email replied.
Sorry mang. I didnāt have access to the logoā¦
Hey Iām interested but I just have a few simple questions. I hope they arenāt too much to ask.
1.) So you supply the metal plate and an acrylic sheet (for artwork), right?. But what about these fasteners? I have an HRAP2:SA and it uses allen-key screws on the top, with mounted nuts inside. Therefore you canāt just use any screw/nut combo without removing the plastic mounting (and possibly damaging the stick). So how are these fasteners supposed to work? Are they just elongated screws or are they completely different? Has anybody used them with the SA?
2.) Is artwork printed and provided, or is it up to the buyer to handle that?
VPT,
These plates and acrylic suit T5 and normal HRAPS. People use their existing bolts with my product.
If you open your plate and measure the hole in the plate (diameter), or measure the diameter of the bolt itself, I can incorporate this into my design and make you some plates as well.
All I need is hole diameter and/or bolt diameter. Donāt care about the bolt or what its screwing into.
No art sorry. Im no artist.
Send me some pics of the plastic mounts with threads. If their position is a typical rehash of their other designs, My plates should fit no problems (still need diameters (in mm) though).
Hey thanks for your reply. When I was talking about art I didnāt mean you to create it, lol. I meant print a pre-designed piece. But thatās pretty easy these days.
Just for reference, here is a pic of the mounted nut: Link
As far as I know, if previous customers are using regular screws, then that should be good. The SA is probably the same as any HRAP2, except for the built in nuts (and maybe Allen-key screws). With SF4 around the corner, Iām tight on funds right now lol. So I wonāt be ordering immediately. But Iāll definitely let you know as soon as I can get one.
Thanks again for your prompt reply!
Thanks for the pic VPT.
UPDATE
Iām having a sh!t run at work this week so all promised pdfs (final design) will be emailed out in the next 48 hours.
Iām just waiting on last minute payments now and will stop taking all new orders on the 21st (unless prior agreement has been made).
This gives me breathing room to double check every persons layout and make sure Iām happy with everything.
Its also the right thing to do by the people who have already paid.
Stay tuned folks. 
will you be making control panels for the mad catz TE stick when it comes out? Iām looking for someone who can make a left handed panel. Awesome panels by the way!