Does Anybody have the precise measurements for the Seimitsu VF plate?

Tech Talk
1

I am looking for an image below but for a Seimitsu VF plate. The information I need most is the length and width of the plate and the placement of the mounting holes, either from the center or the edge.

2

Thanks Voltech. Never mind found it.

3

Yes, VOLTECH just saved picture from AkihabaraShop.jp site.
http://www.akihabarashop.jp/images/seimitsu-VFMeasurement.jpg

4

I noticed that the distance of the Mounting holes are not listed, but rather had to look at the width of the 4 holes at 40mm, divide that by half to get 20 and then add 13 for find out that the two side mounting holes are 33mm away from the center, and … (75mm/2 = 37.3mm - 33mm = 4.5mm ) …4.5 mm away from the edge.