Definitive Retail Playstation 4 Arcade Sticks List with Info/Facts/Photos/Advantages/Disadvantages

Tech Talk
1

IMPORTANT INFORMATION

This list will be incomplete for at least a decade. If you have information we are missing, please provide it for the sake of all who can utilize this info.
This is not a tier list. Learn from the information and use it to your advantage.

and please don’t image quote.

If you have general arcade stick questions, please ask in the “Absolute Question and Answer Thread v.3 (ASK YOUR QUESTIONS HERE!)” thread

If you desire information on other arcade sticks that are not listed here please visit the “What Stick/Controller Should I Buy? Read the Guide on Pg 1 Before Posting.” thread

LIST OF ARCADE STICKS IN ORDER OF WHICH THEY APPEAR BELOW

=Hori BlazBlue Chrono Phantasma Extend Arcade Stick
=Hori Fighting Stick Mini 4
=Hori RAP 4 Premium VLX Kuro
=Hori Dead or Alive 5 Last Round (Grouped with RAP 4 Kai and RAP.V Hayabusa sticks due to same/similar base/parts despite not holding the RAP name)
=Hori RAP 4 Kai
=Hori RAP 4 Kai Silent
=Hori RAP.V Hayabusa
=Hori RAP.V Hayabusa (v2)
=Hori RAP.V Silent Hayabusa
=Hori RAP.V Silent Hayabusa (v2)
=Hori RAP.V4
=Hori RAP.V4 Silent
=Mad Catz Alpha Street Fighter V
=Mad Catz TE2 Standard
=Mad Catz TE2 Guilty Gear Xrd -SIGN-
=Mad Catz TE2 Persona 4 Arena Ultimax
=Mad Catz TE2 Ultra Street Fighter IV
=Mad Catz TE2 Ultra Street Fighter IV Rivals
=Mad Catz TE2 Street Fighter V Chun-Li
=Mad Catz TE2+ Street Fighter V Ryu
=Mad Catz TES+ Street Fighter V Shadowloo
=Sanwa/Arc System Works Guilty Gear Xrd -SIGN- Arcade Stick
=Venom/Mayflash Arcade Stick

**+ Is a positive feature

  • Is a negative feature
    = Is neutral or general information**

Hori BlazBlue Chrono Phantasma Extend Arcade Stick

More images (Promo/Stock/BoxFront/BoxBack/Bottom/Interior)-

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-BBCPE-02.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-BBCPE-03.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-BBCPE-04.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-BBCPE-05.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-BBCPE-06.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-BBCPE-07.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-BBCPE-08.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-BBCPE-09.png

SRKTT thread-
http://forums.shoryuken.com/discussion/195201/new-hori-blazblue-stick

Release Date-
=Early to Mid 2015 (Unsure of exact month)

Case-
-Hori budget stick case (Same as Fighting Stick V3)
=Width = 335mm, Depth = 230mm, Height (including lever) = 110mm
=Weight (1.5kg)
-No touchpad
-No cord compartment

Metal Panels-
=Top metal panel (standard)
-No bottom metal panel

Plexi/Art-
=Licensed artwork for BlazBlue Chrono Phantasma Extend
=No default plexi
=Plexi options will not likely be available for this stick via 3rd party plexi providers
=Default artwork can leave a sticky residue when removing

Bottom Padding/Feet-
=Small rubber feet
-No padding

Joystick-
-Hori generic joystick listed on Japanese website as “Standard Lever”
-Joystick has individual microswitches not a PCB with 5pin connector
-Difficult to change lever out to Sanwa/Seimitsu without heavy modification detailed HERE on V3 stick with same base
=PCB may have pin connector for Hayabusa/Sanwa/Seimitsu 5 pin connector (unconfirmed)

Buttons-
=Hori Kuro Buttons

PCB-
=Insufficient information
=PCB may have pin connector for Hayabusa/Sanwa/Seimitsu 5 pin connector (unconfirmed)
=PCB may have pin connector for touchpad (unconfirmed)

Wiring-
=Quick disconnects for buttons and joystick directionals
-Below average wiring (Detailed below)
-No pin headers/connectors for any directionals or action buttons. Wires are soldered into thru hole and glued in place

USB Cable-
=Cable Length (3m)

Unanswered Questions Due to Insufficient Testing-
-PCB needs testing and comparison to existing Hori PCBs

Hori Fighting Stick Mini 4 for PS4/PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/204975/hori-fighting-commander-ps3-ps4-pc-xinput-fighting-stick-mini-4-with-hayabusa-like-joystick

More images (Promo/Stock)-

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-FightingStickMini4-02.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-FightingStickMini4-03.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-FightingStickMini4-04.png

Release Date-
=December 2015

SRK Front Page article -
http://shoryuken.com/2015/11/20/hori-fighting-stick-mini-4-now-available-through-arcade-shock

Case-
-Hori Mini Case (New/Original Design)
=Weight (1 lb)
=Dimensions (7 x 4.8 x 9 inches)
=8 button design
-No touchpad (Assumption based on stock photos and price)
-No cord compartment (Assumption based on stock photos)

Metal Panels-
=Insufficient information
-No metal panels (Assumption based on stock photos and price)

Plexi/Art-
=No default plexi
=Plexi options will not likely be available for this stick via 3rd party plexi providers

Bottom Padding/Feet-
=Insufficient information
-No rubber feet (Assumption based on stock photos)

Joystick-
=Insufficient information
-Budget Hori joystick (Assumption based on price)

Buttons-
=Insufficient information
-Budget Hori buttons (Assumption based on price)

PCB-
=Insufficient information

Wiring-
=Insufficient information

USB Cable-
=Wired

Unanswered Questions Due to Insufficient Testing-
-PCB needs testing and comparison to existing Hori PCBs

Hori RAP4 Premium VLX

  • Real Arcade Pro 4 Premium VLX Kuro for PS4 & PS3

More images (Promo/Stock/Box/Top/Interior/Mods/PCB)-

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-02.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-03.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-04.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-05.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-06.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-07.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-08.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-09.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-10.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-11.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-12.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-13.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-14.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-15.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-16.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-HRAP4VLX-17.png

SRKTT thread-
http://forums.shoryuken.com/discussion/195793/the-hori-ps4-vlx-thread

SRKTT Definitive Hori RAP thread-
http://forums.shoryuken.com/discussion/196423/hori-real-arcade-pro-thread-for-all-versions-in-progress-could-use-your-help-and-input-v2

Case-
Hori VLX Case (Same as VLX models for PS3/360)
=Sizes - Width = 570mm, Depth = 260mm, Height (including lever) = 140mm
=Weight (5.4kg/11.9lbs)
=Interior of case has plenty of space for mounting PCBs
+Touch panel is present
=Has cord compartment but door is flimsy as usual with all sticks

Metal Panels-
+Both top and bottom metal panels
+Replacement metal panels will be offered via @“Jasen Hicks” of Jasen’s Customs

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Plexi option is difficult for 3rd party plexi providers to provide due to the dimensions/size of the panel. May be offered by @“Jasen Hicks” in the future

Bottom Padding/Feet-
=Padding
=Does not include the bonus stability base previously provided with the first 2 runs of VLX Premium sticks

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons

PCB-
=Common ground PCB but needs diodes in order to multi-mod. A step by step how to was done by @yoooooon - I’ve resized/rehosted the images for backup/archive purposes and the details can also be seen in the below spoiler tag-

Wiring-
=Clean wiring uses very nice quick disconnect ends and an IDE/PATA style ribbon cable from PCB to action buttons and 5 pin joystick connector

USB Cable-
=Wired
=Cable length (3m/9.8ft)

Unanswered Questions Due to Insufficient Testing-
To Edit

Hori Dead or Alive 5 Last Round Arcade Stick
-Hori Dead or Alive 5 Last Round for PS4 & PS3
Not considered a Hori Real Arcade Pro by name, but is the exact same base and PCB as other sticks bearing the RAP in name

More images (Promo/Stock/BoxFront/BoxBack/Bottom/Interior/PCB)-

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-02.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-03.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-04.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-05.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-06.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-07.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-08.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-09.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-10.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-11.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-12.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-13.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-14.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-15.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-16.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-17.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-18.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-DoA5LR-19.png

SRKTT thread-
http://forums.shoryuken.com/discussion/194638/hori-ps4-ps3-dead-or-alive-5-last-round-stick/p1

Release Date-
=Early 2015 (February or March? Unsure of exact month)

Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes DoA5LR - Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
+PS4 touch panel on back
+Analog sticks mounted on front of stick (They are removable by opening up case SEE PHOTOS)
+Cord compartment

Metal Panels-
+Both top and bottom metal panels
=Vewlix layout with standard spread between joystick and buttons

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=No current 3rd party plexi options. Tek-Innovations may offer in 2016

Bottom Padding/Feet-
=No padding
=Four small rubber feet

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons

PCB-
=Unsure if common ground PCB. May exist some type of dual mod issues where signals are held high/low if variable. Needs more research.
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB, joystick, USB cable, and analog sticks are connected to main PCB using standard pin connectors
-Buttons are connected to main PCB by solder and glue

Wiring-
=Typical

USB Cable-
=Wire and cord compartment
=Cable length (3m)

Hori RAP 4 Kai
-Hori Real Arcade Pro 4 Kai for PS4 & PS3

More images (Promo/Stock/BoxFront/BoxBack/Bottom/Interior/PCB)-

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-02.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-03.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-04.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-05.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-06.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-07.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-08.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-09.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-10.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-11.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-12.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-13.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-14.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-15.png

http://www.frankcastleaz.com/images/tt/ps4retail/Hori-RAP4Kai-16.png

SRKTT thread (HRAP4Kai)-
HRAP 4 Kai thread was merged with the HRAP.V4 thread.
Go to page 6 to see coverage for the HRAP 4 Kai. The first 5 pages are for the older base model HRAP.V4 and HRAP.V4 Silent
http://forums.shoryuken.com/discussion/189004/hori-hrap-v4-announced-compatible-with-ps3-and-ps4

SRKTT Definitive Hori RAP thread-
http://forums.shoryuken.com/discussion/196423/hori-real-arcade-pro-thread-for-all-versions-in-progress-could-use-your-help-and-input-v2

Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back
+Cord compartment

Metal Panels-
+Both top and bottom metal panels
=Vewlix layout with wider spread between joystick and buttons

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Plexi is available via Tek-Innovations.com

Bottom Padding/Feet-
+Padding on bottom
-No rubber feet

Joystick-
=Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons

PCB-
=Common ground PCB. May exist some type of dual mod issues where signals are held high/low if variable. Need to discuss with modders more.
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
-Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector

Wiring-
=Typical

USB Cable-
=Wire and cord compartment
=Cable length (3m)

Hori RAP 4 Kai Silent
-Hori Real Arcade Pro 4 Kai Silent for PS4 & PS3

More images (Promo/Stock/BoxFront/BoxBack/Bottom/Interior/PCB) COMING SOON NOT DONE YET -

insert extra photos here

SRKTT thread-
Go to page 6 to see coverage for the HRAP 4 Kai and it’s Silent twin. The first 5 pages are for the older base model HRAP.V4 and HRAP.V4 Silent
http://forums.shoryuken.com/discussion/189004/hori-hrap-v4-announced-compatible-with-ps3-and-ps4

SRKTT Definitive Hori RAP thread-
http://forums.shoryuken.com/discussion/196423/hori-real-arcade-pro-thread-for-all-versions-in-progress-could-use-your-help-and-input-v2

Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back
+Cord compartment

Metal Panels-
+Both top and bottom metal panels
=Vewlix layout with wider spread between joystick and buttons

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Plexi is available via Tek-Innovations.com

Bottom Padding/Feet-
+Padding on bottom
-No rubber feet

Joystick-
=Hori Hayabusa joystick with optical PCB

Buttons-
=Hori Kuro buttons with silencer pads

PCB-
=Common ground PCB. May exist some type of dual mod issues where signals are held high/low if variable. Need to discuss with modders more.
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
-Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector

Wiring-
=Typical

USB Cable-
=Wire and cord compartment
=Cable length (3m)

Hori RAP.V
-Hori Real Arcade Pro.V Hayabusa for PS4 & PS3 (version 1 - Kuro buttons)
-Hori Real Arcade Pro.V Hayabusa for PS4 & PS3 (version 2 - Hayabusa buttons)
-Hori Real Arcade Pro.V Silent Hayabusa for PS4 & PS3 (version 1 - Kuro buttons)
-Hori Real Arcade Pro.V Silent Hayabusa for PS4 & PS3 (version 2 - Hayabusa buttons)

SRKTT thread-
Go to page 6 to see coverage for the HRAP V Hayabusa (version 1). The first 5 pages are for the older base model HRAP.V4 and HRAP.V4 Silent
http://forums.shoryuken.com/discussion/189004/hori-hrap-v4-announced-compatible-with-ps3-and-ps4

SRKTT Definitive Hori RAP thread-
http://forums.shoryuken.com/discussion/196423/hori-real-arcade-pro-thread-for-all-versions-in-progress-could-use-your-help-and-input-v2

Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back
+Cord compartment

Metal Panels-
+Both top and bottom metal panels
=Vewlix layout with standard spread between joystick and buttons

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=No 3rd party plexi options yet. Tek-Innovations may offer in future

Bottom Padding/Feet-
=No padding
=Four small rubber feet

Joystick-
=Hori Hayabusa joystick
=RAP.V Silent uses optical switches with a Hori Hayabusa joystick

Buttons-
=Hori Kuro buttons
=RAP.V Silent uses foam pads inside the normal Hori Kuro buttons
=RAP.V Hayabusa (version 2) uses new Hayabusa buttons which have a matte finish

PCB-
=Common ground PCB. May exist some type of dual mod issues where signals are held high/low if variable. Need to discuss with modders more.
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
-Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector
+XInput is active on the PCB for HRAP.V Hayabusa (Version 2) and will likely be present on the HRAP.V Silent Hayabusa (Version 2) as well

Wiring-
=Typical

USB Cable-
=Wire and cord compartment
=Cable length (3m)

Hori RAP V4 - Hori RAP V4 Silent
-Hori Real Arcade Pro.V4 Hayabusa for PS4 & PS3
-Hori Real Arcade Pro.V4 Silent Hayabusa for PS4 & PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/189004/hori-hrap-v4-announced-compatible-with-ps3-and-ps4

SRKTT Definitive Hori RAP thread-
http://forums.shoryuken.com/discussion/196423/hori-real-arcade-pro-thread-for-all-versions-in-progress-could-use-your-help-and-input-v2

Modding guide/documentation via @Darksakul -
http://forums.shoryuken.com/discussion/comment/8852461/#Comment_8852461

Case-
Hori Case (Same as RAPV3/RAPVX/UMvC3/DoA models for PS3/360)
=One main plastic base. Does not have individual plastic pieces.
=Sizes - Width = 430mm, Depth = 240mm, Height (including lever) = 125mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)

Metal Panels-
+Both top and bottom metal panels

Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
+Tek Innovations does have plexi option (Same as V3/VX non-Kai)

Bottom Padding/Feet-
=No padding
=Four small rubber feet

Joystick-
=RAP v4 Silent uses optical switches with a Hori Hayabusa joystick
=RAP v4 Standard uses microswitches with a Hori Hayabusa joystick

Buttons-
=RAP v4 Standard uses normal Hori Kuro buttons
=RAP v4 Silent uses foam pads inside the normal Hori Kuro buttons

PCB-
=Common ground. Unsure if active high/low. Unsure if able to multi-mod without complications due to insufficient testing.
+Easy to remove main PCB from base
=Button signals/grounds, and USB cable are soldered to PCB while joystick connector and ribbon cables to Turbo/Home PCB are removable from main PCB

Wiring-
=Typical

USB Cable-
=Wire and cord compartment

Madcatz Street Fighter V FightStick ALPHA for PS4/PS3

SRKTT thread-
http://forums.shoryuken.com/discussion/202351/madcatz-street-fighter-v-fightstick-alpha

Release Date-
=Unknown

SRK Front Page article via @d3v -
http://shoryuken.com/2015/08/31/mad-catz-unveils-street-fighter-v-arcade-stick-and-controller

Case-
Fightstick Alpha Case (New/Original Design)
=Weight (Unknown)
=Dimentions (Unknown)
=6 button Vewlix design

Metal Panels-
=Unknown

Plexi/Art-
=Unlikely to have any future plexi option due to case design (No where to screw in plexi and curved base front)

Bottom Padding/Feet-
=Has some type of padding (Specifics unknown)
=Does not appear to have feet in stock photo (Unknown)

Joystick-
=Unknown

Buttons-
=Unknown

PCB-
=Unknown

Wiring-
=Unknown

USB Cable-
=Wired
=Unknown if cable is removable

Madcatz TE2 USFIV/GGXrd/P4AU
-Mad Catz Arcade FightStick Tournament Edition 2 for PS4 & PS3
-Mad Catz Guilty Gear Xrd -SIGN- Arcade FightStick Tournament Edition 2 for PS4 & PS3
-Mad Catz Persona 4 Arena Ultimax Arcade FightStick Tournament Edition 2 for PS4 & PS3
-Mad Catz Ultra Street Fighter IV Arcade FightStick Tournament Edition 2 for PS4 & PS3
-Mad Catz Ultra Street Fighter IV Arcade FightStick Tournament Edition 2 for PS4 & PS3 Rivals
-Mad Catz Street Fighter V Arcade FightStick Tournament Edition 2 Chun-Li for PS4 & PS3
-Mad Catz Street Fighter V Arcade FightStick Tournament Edition 2+ for PS4 & PS3 (Ryu Artwork)

SRKTT thread-
http://forums.shoryuken.com/discussion/190326/official-usfiv-ggxrd-p4u-te2-thread

Case-
TE2 Case (Same on XB1/PS3/PS4/360 versions)
=Weight (Unknown)
=Width/Length/Height with Balltop (Unknown)
=Base consists of multiple heavy duty plastic pieces screwed together
=Interior of case has roughly 5.5cm of height space for mounting PCBs and/or storage
=Side hinge clasps are metal, front hinge clasp is plastic
+Hinges can be nice for replacing parts and storage for extra buttons etc
+Comes with reversible screwdriver flat/hex for maintenance needs
+Replacement sides and bezels offered on Madcatz website for customization options
+Same design/production base by major company for multiple consoles and releases means there will be plenty 3rd party customization options in the future
+Curve of base on back makes it difficult to accidentally press the arcade stick against an object and hit the Start/Select buttons
-Hinges don’t clasp as solid as they should causing a small give with pressure

Metal Panels-
+Both top and bottom metal panels
-Sanwa/Seimitsu screw-ins not compatible with Kick1 due to nut being in way of joystick mounting plate unless you pry up the end of mounting plate

Plexi/Art-
=Multiple types of default plexis depending on which stick was purchased and when it was purcahsed (Will be referred to as Old Plexi and New Plexi)
=Default plexi goes around the buttons instead of under them. This has both advantages and disadvantages as listed below
+All Default Plexi: Default plexi easy to remove for replacing artwork without having to remove wires/quickdisconnects/buttons
-All Default Plexi: Default plexi doesn’t always sit 100% securely as it’s not being held down by buttons

=Default Old Plexi is 1/8" thick in the center but 1/16" thick along the sides where the border/bezel sits on top
+Default Old Plexi: (needs advantages listed here)
-Default Old Plexi: (needs disadvantages listed here)

=Default New Plexi is 1/32" thick and is placed under the bezel
+Default New Plexi: (needs advantages listed here)
-Default New Plexi: (needs disadvantages listed here)

=Tek Innovations does have replacement plexi option 1/16 thickness that sits underneath the buttons and bezel. 1/32 thickness will be offered in future.

Bottom Padding/Feet-
=Has a foam padding
=Does not have feet
+Good for lap
-Slides a bit on hard flat surfaces

Joystick-
+Sanwa JLF-TP-8YT

Buttons-
+Sanwa OBSF-30 and OBSF-24
-These buttons utilize clear rings that allow the button to rise and be flush with the clear top panel
-A few reported issues of stock buttons being shipped with broken or loose tabs likely due to rough installation during assembly.

PCB-
+Common ground. Possible to multi-mod.
+Removable plastic cover from internal USB plug allows removal of PCB easy which neutralizes any issue of short USB wires soldered to bottom of PCB.
+LED PCB (Basic) is offered on Madcatz website for customization options
+LED PCB aka “LVT3” (Super customizable) is offered by Paradise Arcade Shop for customization options
+Touchpad is present on the new SFV TE2+ model with Ryu art (Unsure if this will be common for future TE2 sticks)

Wiring-
+Clean wiring using an PATA/IDE style ribbon cable connector on PCB to 20 color coded wires (10 signal 10 ground) to buttons.
=Quick disconnects have a tab on them. This has both advantages and disadvantages as listed below.
+You won’t experience a quick disconnect becoming loose due to the tab
-Pressing down release tab on each individual wire can be tough for those with big fingers and is much more difficult to remove than usual disconnects

USB Cable-
=Removable proprietary “ProCable” using a circular 5 pin DIN style connector. This has both advantages and disadvantages as listed below
=Screws into connector on back of arcade stick base. Can prevent disconnection of signal if cord is pulled which can be good or bad depending on situation.
+Removable cable
-Must order ProCable replacements from Madcatz. May have luck finding as “MLG ProCable”
=Replacement connector to make your own ProCables may be “Model PMDX-5Pin” (Unconfirmed)

Madcatz Street Fighter V Arcade FightStick Tournament Edition S+ for PS4 & PS3

SRKTT thread-
=Insufficient information

Release Date-
=Insufficient information

SRK Front Page article -
http://shoryuken.com/2015/12/03/mad-catz-unveils-line-of-street-fighter-v-arcade-sticks-fightpads/

Case-
Madcatz TE/TE-S base modified from original base (Unsure how different interior plastic mold base is yet)
=Weight (Unknown)
=Dimentions (Unknown)
=8 button Vewlix design

Metal Panels-
+Both top and bottom metal panels
-Sanwa/Seimitsu screw-ins not compatible with Kick1 due to nut being in way of joystick mounting plate unless you pry up the end of mounting plate

Plexi/Art-
=No default plexi
=Plexi options from 3rd party supplies like Tek Innovations is possible but due to new turbo area may have to be remeasured
=If you choose to remove the turbo area, mount PCB in interior of case, and make buttons for Home/Turbo/L3/R3/Touchpad etc elsewhere on case, you could
get the existing TE/TE-S plexi option from Tek Innovations with no turbo area cut and it should fit properly. Will have to verify the joystick and button holes are exact same as previous TE1/TE-S models

Bottom Padding/Feet-
=Unsure if has padding on bottom
=Does appear to have feet in stock photos

Joystick-
+Sanwa JLF-TP-8YT

Buttons-
+Sanwa OBSF-30 & OBSF-24

PCB-
=Insufficient information

Wiring-
=Insufficient information

USB Cable-
=Wired
=Unknown if cable is removable

Sanwa/Arc System Works Guilty Gear Xrd -SIGN- Arcade Stick (Unsure if official name)

SRKTT thread-
http://forums.shoryuken.com/discussion/194900/

SRK Front Page article-
http://shoryuken.com/2014/09/12/arc-system-works-and-sanwa-denshi-releasing-arcade-stick-alongside-guilty-gear-xrd-sign-console-launch/

Case-
Original Case
=One main plastic base. Does not have individual plastic pieces.
=Sizes - Width = 360mm, Depth = 280mm, Height (including lever) = 110mm
=Weight (2.2kg)
-Has open area cord compartment in back with no flap

Metal Panels-
=Has top metal panel
-Does not have bottom metal panel

Plexi/Art-
+Default Plexi
+Comes with 3 different pieces of art for under plexi
=Default plexi goes around the buttons instead of under them allowing easy art swap

Bottom Padding/Feet-
=Foam padding

Joystick-
=Sanwa JLF-TP-8YT

Buttons-
=Sanwa OBSF-30 and OBSF-24
=Sega Noir Button Layout

PCB-
=No information

Wiring-
=Typical

USB Cable-
=2.5 meters

Venom Arcade Stick (Made by Mayflash?)

SRKTT thread-
http://forums.shoryuken.com/discussion/195434/venom-arcade-stick-ps4-ps3

Guide newbie thread on how to customize/mod-
http://forums.shoryuken.com/discussion/202199/newbie-guide-venom-ps4-full-sanwa-mod-with-octo-for-116-uk-pricing

Case-
Existing retail photos look like same build to the Mayflash V2 arcade stick for PS3/360/PC
=Width = 320mm, Depth = 260mm, Height = 120mm
=Weight (2.1kg)
=Has cord compartment

Metal Panels-
+Both top and bottom metal panels
+Top metal panel has grooves for button tabs for easy install/remove

Plexi/Art-
+Has default plexi for custom artwork insertion
+Stock artwork isn’t glued or attached to default stock plexi
=Same artwork template as Mayflash v2 - https://mega.co.nz/#!iUUQ0IYY!mYbNwtx3nUbrFTjXnUYf067g4lVwB-hDRMdfJzwppbA

Bottom Padding/Feet-
=Has a foam padding on corners
=Does not have feet

Joystick-
=Default Non-branded joystick of average quality with individual microswitches (Microswitch brand unknown)
=Default joystick compatible with Sanwa gates

Buttons-
-Stock Sanwa knockoff buttons of bad quality
=Microswitches use a Seimitsu PS14-G clone switch. It has a very similar feel, the same QD placement, and the same thin microswitch plunger as Seimitsu.
+Easy to replace stock buttons with any standard 30mm button

PCB-
=Common ground PCB
=Has 3 PCBs. One main, one for Start/Select/Turbo/etc, and one for LEDs

Wiring-
=Quick disconnects for action buttons
-Soldered on microswitches for joystick
-Stock joystick wiring to PCB is to 4 individual 2pin connectors and PCB has empty 5pin connector for joystick. This means replacing joystick requires splice of existing wires to 2pin connectors or usage of 5pin connector.

USB Cable-
=Cable Length (3m)
=Utilizes 5pin connector to PCB

===Things I need to edit on this post include===
=Shitloads of pictures of each joystick from stock to interior to PCB etc
=More Information! FEED ME INFO! NEED MORE EXP POINTS FOR KNOWLEDGE LEVEL UP!

2

placeholder post

3

placeholder post 2

4

You should clarify:
It should actually be called the “HRAP V.Hayabusa for PS3/PS4”, not the “HRAP V” as everyone seems to be referring it as.

Additional info:
For the Hori BlazBlue CPE Arcade Stick (Late April 2015)
According to the official Japanese website, it comes with “Standard Lever” and “Standard Buttons”, so probably the same old crap Hori non-Kuro buttons as the previous Fighting Stick VX/V3, probably also soldered to a daughter-PCB.
The casing is probably the same as the FSVX/V3, meaning all plastic with a metal top-panel. Size is 335mm x 230mm x 110mm (including lever height). Weight is 1.5kg. USB cable is 3m long.

5

Awesome stuff. Would love to see one of these for pads also. Good stuff Frank. look forward to seeing this grow more.

6

So other words garbage.

7

In stock-form? Probably.
But if you can find it cheap enough (considering it has crap parts in it), it may be worthwhile to gut it for the PCB and sell off the casing, since it’s a nice size and 6-button. The only semi-tricky part is mounting a JLF correctly.

8

I think I need to gut a Hori BlazBlue CPE Arcade Stick just for its tasty, tasty PCB.
I thinking now I may not want to ruin my Hrap V4

9

No way I’m putting Hayabusa on the end of everything Hori puts out now. The new VLX has “Kuro” in the title too lolz.
Until there’s a different version of the HRAP V without the Hayabusa name on the end, i’ll stick with HRAP V.

EDIT - I did end up putting Hayabusa on the end as that’s the official name. Who am I to disagree with that.

Sweet will update thanks. Any help regarding official weights for the other sticks you may be able to pull is less info I have to dig up, so it’s appreciated.

I wouldn’t call it tasty until someone confirms common ground and easily multi-moddable. :slight_smile:

10

My main concern about not putting “V.Hayabusa” is that a) it’s actually part of the name, and b) it’ll help deter people from thinking it’s the “HRAP 5”.
I still think you should be putting in the full actual names of the sticks, even if it sounds ridiculous. I’m generally going with the names written on the official Japanese Hori site.

11

a) I agree the full name should be listed out. Will update.
b) I’ve never seen anything on a “HRAP 5”

Hori has screwed up their arcade stick model names badly and has already caused mass confusion to the general public (and even us on SRKTT). I’d be surprised if Hori continued this model name plan instead of ditching it for something new and less confusing but who knows, it’s Hori.

12

MayFlash V2 stick is gonna be ps4 compatible. But I think itll have macros :confused:

13

I’ve just seen some discussions in the various recent HRAP threads that people assumed that “HRAP V” meant “HRAP 5”. Better to be clear up front anyways. :slight_smile:

14

Booya. I’m totally on top of things.
Full names and details all pulled from the Hori JP site. URL to each of the sticks’ individual product pages are included as well.

=====

Hori Real Arcade Pro V.Hayabusa for PS4/PS3
http://www.hori.jp/products/ps4/ps4_rap_vh/

Width = 430mm
Depth = 237mm
Height (including lever) = 114mm
Weight = 2.2kg
Cable length = 3m

Lever: Hayabusa
Buttons: Main 8 buttons are Kuros, “Options” button is a Hori button

JP MSRP: 14800yen before taxes

==========

Hori BlazBlue ChronoPhantasma Extend Arcade Stick for PS4/PS3
http://www.hori.jp/products/ps4/ps4_blazblue_ce_stick/

Width = 335mm
Depth = 230mm
Height (including lever) = 110mm
Weight = 1.5kg
Cable length = 3m

Lever: Standard lever (Hori in-house parts)
Buttons: Standard buttons (Hori in-house parts)

JP MSRP: 9800yen before taxes

==========

Hori Dead of Alive 5 Last Round Arcade Stick for PS4/PS3
http://www.hori.jp/products/ps4/ps4_doa_lr_stick/

Width = 430mm
Depth = 270mm (including Analog stick unit)
Height (including lever) = 115mm
Weight = 2.3kg
Cable length = 3m

Lever: Hayabusa
Buttons: Main 8 buttons are Kuros, “Options” button is a Hori button

JP MSRP: 16800yen before taxes

==========

Hori Real Arcade Pro V4 Silent Hayabusa Midnight Blue
http://www.hori.jp/products/ps4/ps4_rap_silent_mb/

Width = 430mm
Depth = 240mm
Height (including lever) = 125mm
Weight = 2.2kg
Cable length = 3m

Lever: Silent Hayabusa
Buttons: Main 8 buttons are Silent Kuros, “Options” button is a Silent Hori button

JP MSRP: 16800yen before taxes

==========

Hori Real Arcade Pro V4 Silent Hayabusa
http://www.hori.jp/products/ps4/ps4_rap_s/

Width = 430mm
Depth = 240mm
Height (including lever) = 125mm
Weight = 2.2kg
Cable length = 3m

Lever: Silent Hayabusa
Buttons: Main 8 buttons are Silent Kuros, “Options” button is a Silent Hori button

JP MSRP: 16800yen before taxes

==========

Hori Real Arcade Pro V4 Hayabusa
http://www.hori.jp/products/ps4/ps4_rap_h/

Width = 430mm
Depth = 240mm
Height (including lever) = 125mm
Weight = 2.2kg
Cable length = 3m

Lever: Hayabusa
Buttons: Main 8 buttons are Kuros, “Options” button is a Hori button

JP MSRP: 13800yen before taxes

15

VLX PS4

http://www.hori.jp/us/Products/PS4/ps4_rap4_premium_vlx/image/image03_b.jpg

16

-Added the stock photo for the standard TE2 PS3/PS4 stick along with the other Madcatz stick photos

Added. Thanks for the heads up.

Thank you again for contributing.

Thank you. Added.

17

Correct me if I’m wrong, but if I recall I think that the Hori RAP V4 and RAP V4 Silent don’t have PS4 touch panels on the back. I think that’s one of the new features advertised for the V.Hayabusa, 4 Kai, and Kuro VLX. I had a V4, before I sold it, and it didn’t have a PS4 touch panel.

18

Edited. Thank you for your contribution to a more definitive list.

19

All the Madcatz PS4 fightsticks are sold out. I’m afraid that when MKX drops in April Imma be playing it on a pad… :’(

20

@Supercholo64 , have you tried ordering from Akishop? They seem pretty good about keeping TE2s in stock, and since the Yen declined/inflated so Japan would be able to export more products, the conversion is really good from US Dollars to Yen right now.