Hey everyone,
A while ago I got a datel arcade pro stick for ps3/xbox because it was a cheap stick and had fairly good reviews. I also have an hrap 3 for my ps3 so I’ve owned a pretty top notch stick. Anyway, when I received my datel arcade pro I noticed the button mapping was a bit off, the rear trigger buttons were the first two buttons instead of the last two. I know I can easily just reconfigure my game to fufil my needs but it gets annoying since I usually travel with this stick and I don’t like messing up my buddies button layouts every time it’s my turn to play. I opened the stick up earlier hoping to try and reconfigure them but moving buttons around but it’s all one big board. I looked in this thread earlier:
But most of the modding pictures are gone now and no one really focuses on what I need.
I just need my datel stick to be mapped like my hrap 3 and I was wondering if it can be accomplished by just moving around some of the wires or if someone else has done this. Many thanks.
LB X Y RB ----> X Y RB LB
LT B A RT ----> B A RT LT
Before After
You’ll need to remove the pins that connect the main PCB with the button-PCB, and solder in and re-route some wires with the config that you want.
Thanks man, but I don’t know if that’s an option since it isn’t really soldered on its more of a hook type thing
http://img97.imageshack.us/img97/5092/sv102468.jpg
I took that photo off another thread here but it seems no one wants to remap the buttons like I do.
Actually, it IS soldered… just with the array of pins instead of wires. You CAN desolder that part.
Either that, or remove the button-daughter-board entirely, and solder wires directly to the buttons’ microswitches from the main PCB.