Yeah he had it under “PS2 stick of unknown origin”. I couldn’t take the chance of waiting for a better price. Hard to find a mas without the sweat soaked palm corner. Plus it seems like I have to buy more sticks to keep this thread alive lol
Thanks man, i love the VSHG platform once it can accept ls32.
Had to do a Gogeta Blue after the Broly one…
2 Likes
How long does it take to print those sides?
About 34 hours
Very sleek design.
Those are printed?
Damn, I could barely tell, push a clean print and clean aesthetic
34 hours abducted and imprisoned in the saucer for their studies on the human race to further invasion plans…fortunately he escaped in one piece but not before using Alien tech to bring down to earth and share with us!
2 Likes
Updated my AFS case with plexi and Vinyl Wrapped CP
AFS 14.5" Case
-Sega 1P6 Extended CP w/Plexi
-Brook UFB
-PAS 1.5 lb Spring
-PS-14-K Buttons
-PS-14-D Buttons
-Hayabusa/JLF Monstrosity
5 Likes
Imported 2nd Impact’s: AO5 Falcon w/ Saint Seiya Artwork.
Brook UFB
11 Gamerfinger buttons 30mm and 24mm
2nd Impact Silent Cherry MX Lever
7 Likes
Just received my new Retro Stockpile budget hitbox enclosure! (eBay link)
Still no parts whatsoever lol but I’m looking forward to building this thing out. Just need to decide what direction I want to go as far as colors/theme (opinions?). For the brains I might use the Hori mini PS4 pad, but then I’d likely need to add a SOCD cleaner, so maybe I’ll just get the Brooks PCBA or non-audio PS3/4+.
This is my first time venturing into hitbox/stickless territory. Got my first stick, the Ryu/SFV TE2+, right at the start of the new year and then I got addicted, only two months later and this’ll be my sixth fightstick!
2 Likes
This has been a few weeks waiting to upload here.
Etokki Omni Korean Edition, Taeyoung Fanta with a white battop swap, Sanwa OBSF30 Green/White plunger swaps, Seimitsu PS-14D menu buttons, plus custom hand-drawn artwork from local player Kyouma.
Got the buttons from MAK Japan while I was there, which literally cut the cost on parts to customize in half. Also saved on shipping by having @laugh give me the battop via @mintcheerios at Evo Japan.
Definitely my favourite stick in terms of casing, customization, and parts I’ve ever owned.
3 Likes
My newest build! @jonyfraze Korean BNB, artwork by JxK Designs, golden lever, 3d printed sides and some LEDs.
LIGHT IT UP!
6 Likes
Hey SRK Fam! Been MIA here (my bad) but here’s some recent art/build projects we finished up to start 2019.
@butteroj’s “G” BnB (see post above)
FuryOfFrog DOA6 LaMariposa BnB:
Eric K Devastator BnB:
StillDevious TES upgrade
Chun-Li TE->TES converstion (OG art by Marthe):
Brook BnB for EvoJapan 2019
TekToro Violent Ken:
More details about the builds / artwork on our IG accounts:
BnB Fightstick Case: http://www.jonyfraze.com
6 Likes
Very cool sticks. Devastator’s face looks way off though.
Here I go with yet another potatoe camera special!~
Going through color pains 'cause you know how it is.
At first I had it with just a blank Turbo panel, just a metal piece held underneath for suture mini vandal buttons but I opted for the HRAP2 PCB to make it more official. The thing is the shell is from a T5JP that was yellowed to hell, proceeded with miracle earser cleanup and then whitening Vol40 12% crème and this is the result, it’s an Ivory look of sorts, so I went with it and complemented the shell with inspiration from 70’s hardware and what have you.
The vinyl is all different brands, all drawn and cut by hand, I’m still very new to this sorta work, really dull exacto knife didn’t help. Plenty of mistakes were made but I really wanted to give button surround art a crack, I’ve doe simple overlays and tape work like the one in the center stripe but nonetheless, cutting all these intricate curves with just jars and round stuff was a challenge, McGuyver would be proud, lol.
HRAP Ivory
HRAP2PCB
HRAP3 CP
T5JP Shell
Korean Golden Lever Hyrbid
Crown 309 Body
Golden Shaft & oversized Actuator
High Tension Grommet (Red)
Happ/IL Comp Buttons
Seimitsu PS14D Buttons
Heavily inspired from Polaroid, Betamax and late 70’s spirit.
8 Likes
Was strolling through Instagram and found some images of a TE2 mod showcasing a android 18 graphic that I helped make awhile back (IG: @supreme_tuna)
1 Like
Here’s my updated Qanba Obsidian. Specs are below.
Stick: Crown 309MJ
Buttons: Samducksa SDB-202
Artist for Artwork: @Ohhaiari
To do list:
Get EZ Mod up and working (USB cord was bodied free)
update the shaft on the Crown to a shaft that accepts JLF and Seimitsu bat/balltops
upgrade tensioner to either a 55A or 65A from Arcade Stick Indonesia
Play more Sakura
3 Likes