Clean and simple, I like it. :tup:
What brand of colour did you use for the case? Got the same stick and was hesitant to paint it so far.
b15, disgustingly beautiful work as always. T_T
Anyone know if the Sanwa OBSM Series 30mm Hole Plug or Yenox Hole Plug on LL cover up the hole so well that itās unnoticable through the Lamilabel? I want it to look like this guys Berzerk SE, any suggestions?
Thank you sir. I am not too sure of the button color scheme, so I"ll be changing them out trying to find a āfeelā for them.
Resurrected my old namco for some SF4 action on the pc and the 360.
JLF with Namco shaft internals - Full sanwa Screw in button conversion , With wired xbox 360 controller inside.
That Namco is super slick!
I had to draw the M.Bison font in AIā¦vectorized it.
It does pop up a little bit in the middleā¦just enough to annoy me. Iām going to mod my other TE stick, this time Iām going with the full plexi and all 6 holes drilled.
Just an update. Everything is pretty much in and wiring is done. Clear balltop. Just need a USB cable for the PCB->Neutrik and Iām done. Plays awesomely. Been using it the past few nights.
http://hphotos-snc3.fbcdn.net/hs115.snc3/16239_1279843803498_1452120864_30748674_8094163_n.jpg
Wow Datter, that is perfect looking! Very nice indeedā¦
Jesus Christ that thing looks hot.
I wonāt lie, I really like that rug.
Is the jlf mounted at the proper height? It looks a little high to me, but Iām not sure if thatās just an optical illusion from the insanely thin case. Either way though, it looks super nice.
Ya that does look like it is mounted higher now that you mention it. Iām sure it was necessary giving the height of the stick. Now Iām curious if it has too much throw to it, but I donāt think the mount height would affect that though.
Itāll probably feel like it has a longer throw due to the shaft being that long but in reality itās still the same. Just feels longer.
Most likely itās because the base of the stick to the ball top is farther apart than normal cases.
It looks great Datterboy! I love the wiring. It looks like something Ecksnine would wire up. As for the height of the stick, I would use a bat top on that so that it wouldnāt feel so high. Iām sure youād get used to it though.
looks pimp datterboy i like the art as well
That stick looks perfect Datterboy. :tup:
The slim profile of the stick is very well done. However, in case you change your mind later on about the mounting height of the stick, hereās a useful image documenting various ways on how to alter the shaft in order to get the correct mounting height.
http://img237.imageshack.us/img237/4964/drawing2model1.th.jpg
nice diagram you got there
New Happ/iL built using a http://qcfgaming.com/ gaming case, a lot of sanding and a lot of coats of high gloss paints and the mdf guide at http://forums.shoryuken.com/showthread.php?t=191692
It still needs some more sanding & coats, but I canāt do any more painting until it warms up outside.
http://lh6.ggpht.com/_4Bufb8FrID0/SyWKYOY0UNI/AAAAAAAAA-M/NFSqZNipGOc/s800/DSC01847.JPG
http://lh5.ggpht.com/_4Bufb8FrID0/SyWKYwhklkI/AAAAAAAAA-U/IO74UDjbbjQ/s800/DSC01849.JPG
jmro let me say that came out very nice nice enough i might get a plexi 1 