Hi,im new but i was building a fight stick with this, https://www.focusattack.com/ist-pre-installed-brook-ps3-ps4-pc-fight-board-pcb-kit/,
I have everything connected but when i go to test the joystick, it is only recognizing up
Need more info.
It’s pretty clear that you wired something wrong, but your description doesn’t tell us anything.
Take clear pictures of your wiring, especially on the PCB side of things.
Your 3P is mixed with 3K button most likely, and your joystick is plugged in upside down.
Try those out, if not post pictures.
Keep in mind that RT and LT on a 360 controller corresponds to the Z-axis when looked at on a PC:
hey guys so i was testing it out with a spare 5 pin connector that my bro had, and that cable worked, i had everything replugged in exactly how i had before. guess it was the cable.
Did you try flipping the first 5 pin connector upside down as suggested earlier?
