Brook Universal Fighting Board Thread

[Brook_Engineer]

Anyone know if I could put this into a hitbox controller? I don’t see why I couldn’t but wanted to ask.

yes, you can

[Siryx]

have anyone ever mod the PS3 Hori Fighting Edge with the Brook Universal Fighting Board or with the Brook PS3/PS4 Fight Board PCBA, without losing the panel buttons and leds bars? @Brook_Engineer I want to buy the PCB, but not sure how to wire the touch panel.

[sasquach]

have anyone ever mod the PS3 Hori Fighting Edge with the Brook Universal Fighting Board or with the Brook PS3/PS4 Fight Board PCBA, without losing the panel buttons and leds bars? @Brook_Engineer I want to buy the PCB, but not sure how to wire the touch panel.

It is definitely possible! The touch pad is a bit trickier, but with a multimeter it is possible.

[GOGO.Zippy]

have anyone ever mod the PS3 Hori Fighting Edge with the Brook Universal Fighting Board or with the Brook PS3/PS4 Fight Board PCBA, without losing the panel buttons and leds bars? @Brook_Engineer I want to buy the PCB, but not sure how to wire the touch panel.

@Siryx

The Brook PS3/PS4 Fight Board PCBA supports Brook’s touch panel, refer to those pictures to connect.
http://www.brookaccessory.com/detail/58690501/

[Siryx]

have anyone ever mod the PS3 Hori Fighting Edge with the Brook Universal Fighting Board or with the Brook PS3/PS4 Fight Board PCBA, without losing the panel buttons and leds bars? @Brook_Engineer I want to buy the PCB, but not sure how to wire the touch panel.

@Siryx

The Brook PS3/PS4 Fight Board PCBA supports Brook’s touch panel, refer to those pictures to connect.
http://www.brookaccessory.com/detail/58690501/

I’m talking about the Fighting Edge touch pad, the panel have start, select, config and block buttons. I think the original PCB of my fightstick dies, so I’m looking for a replacement.

I read somewhere that you need some resistors and diodes but not sure where to put those.

I really want to fix my fightstick.

[Vicko]

have anyone ever mod the PS3 Hori Fighting Edge with the Brook Universal Fighting Board or with the Brook PS3/PS4 Fight Board PCBA, without losing the panel buttons and leds bars? @Brook_Engineer I want to buy the PCB, but not sure how to wire the touch panel.

@Siryx

The Brook PS3/PS4 Fight Board PCBA supports Brook’s touch panel, refer to those pictures to connect.
http://www.brookaccessory.com/detail/58690501/

I’m talking about the Fighting Edge touch pad, the panel have start, select, config and block buttons. I think the original PCB of my fightstick dies, so I’m looking for a replacement.

I read somewhere that you need some resistors and diodes but not sure where to put those.

I really want to fix my fightstick.

You don’t need the original PCB, just the panel.

[Antonio-o-o]

I’m a bit confused. Does the TPKey double as the “Select” button? In the documentation I see that the TPKey is labeled as " Touchpad Key | Select | Back | ‘PS4 Options Symbol’ ". So if in fact this button does act as a multitude of substitutions, is it really 4 buttons in 1? I plan on wiring the the actual “Turbo” button on my TE to be that the TPKey, but if I can substitute my “Select/Back” button to that of this 3-or-4-in-1, then I’ll do that, and I can keep “Turbo” as “Turbo” via the UFB.

[GOGO.Zippy]

I’m a bit confused. Does the TPKey double as the “Select” button? In the documentation I see that the TPKey is labeled as " Touchpad Key | Select | Back | ‘PS4 Options Symbol’ ". So if in fact this button does act as a multitude of substitutions, is it really 4 buttons in 1? I plan on wiring the the actual “Turbo” button on my TE to be that the TPKey, but if I can substitute my “Select/Back” button to that of this 3-or-4-in-1, then I’ll do that, and I can keep “Turbo” as “Turbo” via the UFB.

@Antonio-o-o
TP key is outputting four keys on four consoles
Touchpad on PS4
Select on PS3
Back on 360
Double square on Xboxone

[The_Real_Phoenix]

Anyone know if I could put this into a hitbox controller? I don’t see why I couldn’t but wanted to ask.

Yes you can (freshly uploaded, don’t laught to my accent):
https://youtu.be/CgDtMl0EkiM

[Karurauatsuurei]

Can the UFB be used to replace the stock PCB in the Hori V3 SA (for PS3), to have it work with my PS4?

Does this require soldering, and is there something similar to an EZ MOD for the V3 SA that I can use to make it easier?

[Brook_Engineer]

Can the UFB be used to replace the stock PCB in the Hori V3 SA (for PS3), to have it work with my PS4?

Does this require soldering, and is there something similar to an EZ MOD for the V3 SA that I can use to make it easier?

yes

[Vicko]

Anyone know if I could put this into a hitbox controller? I don’t see why I couldn’t but wanted to ask.

Yes you can (freshly uploaded, don’t laught to my accent):
https://youtu.be/CgDtMl0EkiM

no E in Brook homie
it’s on the pcb and the box
better reupload

[Vicko]

Can the UFB be used to replace the stock PCB in the Hori V3 SA (for PS3), to have it work with my PS4?

Does this require soldering, and is there something similar to an EZ MOD for the V3 SA that I can use to make it easier?

yes
yes
no

[The_Real_Phoenix]

no E in Brook homie
it’s on the pcb and the box
better reupload

Ha crap. I’m making the mistake all the time. Just the thumbnail to re-upload.

[HardcoreYork]

So I have tried soldering on J9 on my old UFB and that did not work, then I contacted Brook and received a replacement board. Unfortunately now I have a similar issue in that 4K is not working. I have done the exact same process as last time using newly shipped buttons and wires and it still does not work :bawling: any suggestions?

[AmedoS310]

Heads up. New PS4 firmware, 4.00, release tomorrow.

[LLLLLFiVEL5L]

Damn Sony! Why must they rain on our parade !

[kardus]

Another controller-only tech unavailable to brook users due to no alternative SOCD options and L+R always being forced neutral https://www.youtube.com/watch?v=kw8192Fh2pA&t=3m30s

[Vicko]

So I have tried soldering on J9 on my old UFB and that did not work, then I contacted Brook and received a replacement board. Unfortunately now I have a similar issue in that 4K is not working. I have done the exact same process as last time using newly shipped buttons and wires and it still does not work :bawling: any suggestions?

learn how to solder

[Chish]

I saw that Desk video too – any chance we can get firmware that will let us toggle horizontal SOCD? Or just firmware with it off?