@Tomtortoise
It’s only working with Brook touch pad.
Hmm, so then I am guessing it is only compatible with the ZET6221 series touch IC’s then? I am looking to make a full size touch slider for Project Diva Future Tone which I will probably end up using the ZET6221WPA.
i love that you made a breakout neutrik for the usb and 3.5mm jack.
however i am not thrilled it is a mini usb on it. any way brook can make a breakout that has only the 3.5mm jack on it? i would rather use a regular usb neutrik on my case and put a separate 3.5mm jack neutrik on the front panel.
if brook won’t make a 3.5mm jack neutrik, does it exist? i can’t find one for the life of me.
@zerofxi
Please look at this pic…
You can choice anyone usb to connect with console.
https://drive.google.com/file/d/0B_xxppvd7h24dkxjdmxYUW5kTDQ/view?usp=drivesdk
That’s not what I meant.
I am aware that I can have another way to connect the USB. So I wish I can have a neutrik usb in the back and your breakout in the front.
Is there consideration to have a 3.5mm jack only breakout? Or maybe just a plate cover switch where it only has an opening for 3.5mm jack and no micro usb.
-
use a cable to connect between J1/Micro usb and neutrik usb
https://drive.google.com/open?id=0B_xxppvd7h24QVAwdlVxWHRaUmM
https://drive.google.com/file/d/0B_xxppvd7h24dkxjdmxYUW5kTDQ/view?usp=drivesdk -
remove J1-1 to disable Micro usb in the breakout board.
https://drive.google.com/open?id=0B_xxppvd7h24S1hJdmo0Y0RQbVU
Really appreciate your responses. I am not being clear in my questions.
What I am asking is purely cosmetic because I don’t want to have the micro usb port on the breakout plate. I was wondering if you have plans to release a swappable plate that only shows the 3.5mm jack opening and no micro usb port.
- To Remove 4pin from J1-1 in PS4+ Audio FB so that Micro usb will no function in the breakout board.
- Need a cable to link J1/Micro USB and Neutrik USB
See this pic
https://drive.google.com/open?id=0B_xxppvd7h24SVM3alRnR09XZU0
Hey @jonyfraze can you see if those new aux audio panels fit over a neutrik gaskets for more sexy?
=
More Sexy?
Is it possible to have the J11-1 pinout? I couldn’t find it on the brook’s website.
I suppose this is a TRRS 3.5 jack, so something like mic, left, return left, right, return right and ground?
@The_Real_Phoenix
Look this link, we printed all pinout function on user manual.
Brook website is coming soon…
https://drive.google.com/file/d/0B_xxppvd7h24dDNnLTJ5TFp0Uk0/view?usp=sharing
Thanks!
@“GOGO.Zippy”
I meant, would you consider selling a plate without the micro usb as seen below? Even if it is just the plate.
Is the plate portion removable to make a custom one?
Thanks for all the responses!
I think you want a panel mount 3.5mm socket.
No sorry - if there is ever a need for
Just tried it on mine. Fits snug!
Snug works for me!
Spoiler
that’s what she said…
Found this trackpad today and I am going to try it out; if it works with this board then it is going in my arcade cab…
cirque.com/glidepoint-circle-trackpads
cirque.com/steamvrkit
$25.00 US
@“GOGO.Zippy” I seem to be disconnecting randomly after a few minutes of play