Can anyone confirm if the Xbox 360 Mad Catz Tournament Edition S (with Ryu and Ken on it) is compatible with either the Xbox 360 to PS4 converter or the Xbox 360/XB1 to PS4 converter?
A man shared a pic of Xbox 360 Mad Catz Tournament Edition S to work with Xbox 360 to PS4 converter.
so did anyone scoop one in that brief (20 min) arcadeshock restock yesterday? 
There is a 8 minute timeout when using the Beta PS4 firmware, 3.50
Brook should fix their firmware or else the next update to the PS4 firmware will cause the same timeout problems. I have both a XBOX one/360 to PS4 converter and a 360 to PS4 converter
@beseitfia
Yes. it is compatible with the (Red) brook converter PS3/PS4 to XBOX One. We owned this stick to test.
I just got the white PS3 to PS4 super converter. My PS3 TE stick doesnāt seem to be working with it. Is the TE stick completely incompatible with it? Or will a patch fix this somehow?
Yes I got it to work by updating the firmware.
Does the Brook Fightboard have a similar problem, otherwise I might get that and return the super converter because of better latency and also no need to always update. I wonder if they share firmware.
@mastermx
Yes, I think the Brook Fightboard have the same issue, but Brook will look and fix when PS4 released final 3.50 system.
I have pink brook, gamepad xboxone wireless does not work without the usb cable. how to fix?
Anyone know if the Brooks Super Converter (white) PS3 to PS4 if its compatible with a Hori OG/Diamond VLX? I ask because itās the only controller/joystick that I cannot get it to register/work on a Xim4. So just double checking if itāll work on a Brooks Super Converter (White) before I import it. Thanks!
bad that the site is not brook this information (((another question, when enabled turbo fire usb flash this normal?
it worked on my original red VLX
I got the yellow converter (Ps3/ps4) and im facing a problem with the update firmware. Iāve tried everything and even contacted them so now im posting in here because theyāve abandon me. They aint replying back anymore so i hope ya guys can help me out. The problem im having is the device shows up as HID transfer and i want it be back to Ps4 gamepad.
I sent them the videos but no responds so check my problem on the video:
https://www.youtube.com/watch?v=Af9KBdW59Vk
(This was made on the computer) It can be hard to watch cuz i move alot with the camera. But it shows how i updated it and it still does not work.
https://www.youtube.com/watch?v=AF7KMLuuzQU
https://www.youtube.com/watch?v=yHafW-eqgR0
(This was made on the laptop) Both clip shows how i did the update. Still nope.
Anyone help me, its been collecting dust for like few monthsā¦
When you update it, yes it goes right back to the update screen again once you update it and do the button combo thats normal or least was for me on my green converter, since there is no sound on your video it looks like your pointing at the end like something went wrong, what are the steps yo have taken so ppl do not suggest to you something you have tried before. Like updated the driver for it before installing the firmware. And in some cases use file B also IF file doesnt make it work on your system, Dumb question but you have tested it out on your system?
- Uninstall Zeroplus USB Driver from HID Transfer Device.
- Re-update A patch file without Zeroplus USD Driver.
- Updated successful A patch file, the yellow converter will change to PS4 wird gamepad.
- Intall Zeroplus UB Driver in PS4 wired Gamepad.
- Updated B patch file without Any controller
All PS4 converters used the same updated process, look and follow combo keys in App to do.
The session list of Video.
USB Driver started at 00:00-02:00
A patch file started at 02:00-04:00
B patch file started at 04:00-06:00
Holy crap It works, THANK YOU MAN! These steps should be on their website if anyone had same problem as me about HID transfer. I was about to throw the converter until i commented on this forum. Thanks again @GOGO.Zippy youāve saved me and my money.
I have 5 different arcade sticksā¦one TE,one custom hello kitty hori(my daughters),and three custom hitbox controllersā¦one has a old TE PCBā¦one has a cheap zero delay ps3/pc PCB and the last has Akishop PS360+ā¦ I recently bought the white PS3>PS4 super converterā¦ the PS360+ and the zero delay PCB arenāt being recognizedā¦ all the other sticks work fine and Iām stoked about that but it would be perfect if I could get the others to workā¦any ideas?.Iām thinking I am missing a step or somethingā¦