Brook Converters Thread

[GOGO.Zippy]

used this on my HORI stick HRAP and gotta say feels so clean playing KI on it on X1

Hi Megaman
Which converter do you use?

[Letram_Chi]

It works perfect, new Mad Catz TE-S “Red” X360
with x360 to Xbox One converter
Killer Instinct tested

[MegamanX-8]

used this on my HORI stick HRAP and gotta say feels so clean playing KI on it on X1

Hi Megaman
Which converter do you use?

the Brook 360 to X1 converter

[Ibaids]

Tested out my PS3 Hitbox w/ the PS3/PS4>Xbox One adapter and sadly it doesn’t seem to be working; the Hitbox itself is registering fine on my PC but there’s no response when I connect it to my Xbox One. I’m going to test it out w/ a PS3 gamepad to make sure that the adapter I received wasn’t faulty, so we’ll see.

Has any else tried using the adapter w/ the PS3 Hitbox?

[jonyfraze]

Tested out my PS3 Hitbox w/ the PS3/PS4>Xbox One adapter and sadly it doesn’t seem to be working; the Hitbox itself is registering fine on my PC but there’s no response when I connect it to my Xbox One. I’m going to test it out w/ a PS3 gamepad to make sure that the adapter I received wasn’t faulty, so we’ll see.

Has any else tried using the adapter w/ the PS3 Hitbox?

snap a pic of the PCB inside if possible

[GOGO.Zippy]

Tested out my PS3 Hitbox w/ the PS3/PS4>Xbox One adapter and sadly it doesn’t seem to be working; the Hitbox itself is registering fine on my PC but there’s no response when I connect it to my Xbox One. I’m going to test it out w/ a PS3 gamepad to make sure that the adapter I received wasn’t faulty, so we’ll see.

Has any else tried using the adapter w/ the PS3 Hitbox?

Hi Ibaids
Please help me check two points:

1. Look manufactured date on bottom label
2. Which brand’s board is it in PS3 Hitbox? Take a picture…

Thanks

[jonyfraze]

Guys - so @GOGO.Zippy and I been speaking back and forth the last couple of days… just wanted to fill you in on a few things:

1 - I am testing out a new firmware for the “green” 360-P4 adapter that addresses some issues on the PS360+ (dropped inputs and slight lag). Im happy to report the new firmware fixed these issues. the revised firmware should be available soon after it is fully tested.

2 - the brook team has been in contact with akishop and brought up their issues about the adapters not working properly on the ps3 side of the ps360+. they got a response back from aki saying they will be looking into a revised firmware that will allow the adapters to work properly. Hopefully this comes to fruition since the ps3 side on the older pre 2.10 boards perform without the 1 frame lag it has on the 360 side.

3 - Brook is working on putting out an official lag test on their site soon as well.

[Ibaids]

Tested out my PS3 Hitbox w/ the PS3/PS4>Xbox One adapter and sadly it doesn’t seem to be working; the Hitbox itself is registering fine on my PC but there’s no response when I connect it to my Xbox One. I’m going to test it out w/ a PS3 gamepad to make sure that the adapter I received wasn’t faulty, so we’ll see.

Has any else tried using the adapter w/ the PS3 Hitbox?

Hi Ibaids
Please help me check two points:

1. Look manufactured date on bottom label
2. Which brand’s board is it in PS3 Hitbox? Take a picture…

Thanks

I don’t see a date of manufacture on the controller, but here’s a picture of the board:

http://imgur.com/Pys6FXG

[GOGO.Zippy]

Tested out my PS3 Hitbox w/ the PS3/PS4>Xbox One adapter and sadly it doesn’t seem to be working; the Hitbox itself is registering fine on my PC but there’s no response when I connect it to my Xbox One. I’m going to test it out w/ a PS3 gamepad to make sure that the adapter I received wasn’t faulty, so we’ll see.

Has any else tried using the adapter w/ the PS3 Hitbox?

Hi Ibaids
Please help me check two points:

1. Look manufactured date on bottom label
2. Which brand’s board is it in PS3 Hitbox? Take a picture…

Thanks

I don’t see a date of manufacture on the controller, but here’s a picture of the board:

http://imgur.com/Pys6FXG

Please look label on your converter…
Do you ever update new firmware to your converter?

Thanks.

[jonyfraze]

@Ibaids unfortunately that pcb is a Toodles MC Cthulhu which I own myself and tested with the adapters. It is confirmed to not work =(. It’s on the list of not working pcbs on the first page.

[dfyb]

Tested out my PS3 Hitbox w/ the PS3/PS4>Xbox One adapter and sadly it doesn’t seem to be working; the Hitbox itself is registering fine on my PC but there’s no response when I connect it to my Xbox One. I’m going to test it out w/ a PS3 gamepad to make sure that the adapter I received wasn’t faulty, so we’ll see.

Has any else tried using the adapter w/ the PS3 Hitbox?

Hi Ibaids
Please help me check two points:

1. Look manufactured date on bottom label
2. Which brand’s board is it in PS3 Hitbox? Take a picture…

Thanks

I don’t see a date of manufacture on the controller, but here’s a picture of the board:

http://imgur.com/Pys6FXG

That looks like a cthulhu – hitbox’s site also mentions that’s what they use (the PS3/PC ver). I have the same PCB but have been waiting to get confirmation that it works with the converter, so please keep us updated

[Ibaids]

Please look label on your converter…
Do you ever update new firmware to your converter?

Thanks.

The converter looks like 02/03/2015 (or maybe 03/02/2015, not sure which one).

I have no updated the converter yet; do you have a link where I can download the newest firmware?

[Ibaids]

@Ibaids unfortunately that pcb is a Toodles MC Cthulhu which I own myself and tested with the adapters. It is confirmed to not work =(. It’s on the list of not working pcbs on the first page.

That looks like a cthulhu – hitbox’s site also mentions that’s what they use (the PS3/PC ver). I have the same PCB but have been waiting to get confirmation that it works with the converter, so please keep us updated

Bleh, ok, thanks guys. Guess I’m in the market for a new stick, then

[dfyb]

@Ibaids unfortunately that pcb is a Toodles MC Cthulhu which I own myself and tested with the adapters. It is confirmed to not work =(. It’s on the list of not working pcbs on the first page.

I don’t think it’s an MC – think it’s just PC/PS3 cthulhu as listed on hitbox’s site. 2450 on the chip matches up with the pic on godlikecontrols.com too. Though his has the diodes, so it’s 1.4 or newer.

[jonyfraze]

@Ibaids go back a couple of pages the link for the firmware upgrade is posted via @C-Sword

[GOGO.Zippy]

@Ibaids unfortunately that pcb is a Toodles MC Cthulhu which I own myself and tested with the adapters. It is confirmed to not work =(. It’s on the list of not working pcbs on the first page.

That looks like a cthulhu – hitbox’s site also mentions that’s what they use (the PS3/PC ver). I have the same PCB but have been waiting to get confirmation that it works with the converter, so please keep us updated

Bleh, ok, thanks guys. Guess I’m in the market for a new stick, then

Thanks Guys
I don’t have MC board to test. but I modified some firmware to improve compatibility issue.

I have ordered a MC board. I’m waiting it…

If you helped me to test, I could offered new version firmware to you, it’s non-released version.

Thanks…
Zippy

[gekkekoe]

@GOGO.Zippy Can’t you guys make an extension board for the ps360+ to deal with the 8 min timeout? It would sell like hot cakes…

[GOGO.Zippy]

@GOGO.Zippy Can’t you guys make an extension board for the ps360+ to deal with the 8 min timeout? It would sell like hot cakes…

Hi Gekkekoe
BROOK Converter will do more improvement to deal with more players…

[Ibaids]

Thanks Guys
I don’t have MC board to test. but I modified some firmware to improve compatibility issue.

I have ordered a MC board. I’m waiting it…

If you helped me to test, I could offered new version firmware to you, it’s non-released version.

Thanks…
Zippy

Sure, I would be more than happy to help you test. Just let me know what I need to do.

[Ibaids]

@Ibaids go back a couple of pages the link for the firmware upgrade is posted via @C-Sword

Unfortunately, the link to the facebook post that was posted is now dead.