Anyone in the Bay Area, preferably South Bay, that is able to turn my madcatz te 360 stick into a multiconsole stick? I would like it so that my stick is able to support 360,PS3, and PS2, with just one wire coming out of the stick, using the detachable cables. If anyone is interested, please send me your rates. Thx alot everyone.
Peace!
bump.
anyone?
i would help, but im in sacramento. if you want to do it i can call you and go over some things with you to help you out.
try pming rtdzign. i think he’s in mountain view if you want someone in the south bay.
i can also do it but i don’t have any parts on hand and i live in danville in the east bay.
you would need to supply me the following if you wanted me to do it.
1x multi console cthulhu pcb http://www.gamingnow.net/diy/circuit-boards/multi-cthulhu
1x imp pcb http://www.gamingnow.net/diy/circuit-boards/imp-board
1x neutrik rj45 jack http://tinyurl.com/neutrikjack
2x neutrik rj45 barrel connectors http://tinyurl.com/neutrikboot
1x psx extension cord (can probably find these locally or gut from an old psx/ps1/ps2 pad)
the mc cthulhu pcb acts as the brains for ps3 and ps2. the imp pcb acts as a switch from ps3 to 360 by holding down a button when you plug into a console. the neutrik rj45 jack is where you plug in your cables. the neutrik barrel connectors allows your cables to to plug into the stick.
you need 1 barrel connector for each system cable. i suggested 2 so 1 would be for usb (if you wanted that detachable) and the other for ps2. if you want your usb cable to remain attached how it is now then you would only need one connector for ps2. other systems also work from the mc cthulhu like xbox1 and wii/gamecube as well as retro consoles like saturn/nes/etc.
te looks like this when finished.
inside
outside
connected with cable
cable examples
i charge $60 for the labor on this type of mod.
takes a day to finish but that also depends on how busy i am. pm if you have any questions.
if you want to do it yourself there is a tutorial here (it’s an se stick but the it uses the same pcb as te stick)
http://www.shoryuken.com/showthread.php?t=184787
Akuma001 = best modder in the biz
edited for accuracy
yo akuma good lookin out. thx for all in the info. might pm u about possibly contracting you but not sure yet.
p.s i’m assuming by ur xbox handle u skratch?
i used to scratch couple years ago, do you cut?
i’ve found that a bunch of people here are learning to scratch or used to scratch or just front with a scratch mixer name like that toy vestax. 
yea same. i used to skratch every now n then. still off and on. but not too too much. i don’t know if u know, but this cat named the ruckazoid made a video using that cut it up fresh sample. shit was ridiculous.
yeah i used to hang out with ricci back in the day when he used to go by the name nicks. he used to hang out at sjsu alot with the ksjs radio station dudes and we would all kick it.
my live name was inspired by this 45 record he put out of him and dstyles doing some cuts over the slow beat on gag seal breaks 99 or so. the beginning had this sample that goes “there’s only one thing left to do now…cutitupfresh!” my all time fave scratch track.
and the tag under my name “cuts don’t lie” was this thing we used to say about scratchers. like you can tell what kind of scratcher they are because the sound of their cuts keeps them honest and doesn’t lie.
but yeah man he is ridiculous on the cut.
side note to keep this on topic, i learned to solder from replacing rca cables on technics turntables because you know them shits always break from moving them around when you do gigs.
ahahahaha. so u really know the ruck then? i’m guessing u frequented the funkshitup/dstyles board back in the day.
yeah i used to lurk hella boards back in the day. ttnn, dstyles, asis, skratchchat on paltalk, etc. haven’t talked to ricci since around 05 though. those days he was less about raw cuts and more on making some music with more than just turntables.
too bad shit is dead now. 
Don’t mean to hi-jack thread but I’m also in the business for a local custom stick builder.