Yes.
you can solder wires to the underside (its a pcb holding the pins of the male quick disconnects)
Gotcha. Thanks guys.
EDIT: do the Sparkies come with pre-set LED configurations? I had a friend order mine a while ago and Im not entirely sure if he followed the procedure correctly. I can’t get any activation and while I can’t say with certainty that my wiring is correct, I can’t really think of anything else.
EDIT2: Alright heres the scenario: I plug the controller in (Chimp/360 TE board), LED lights up for a split second and then shuts off. I press the button, no activation. Any ideas?
ARC EYEs on Sega Naomi Chopped Cab. Havefun
[
](‘http://2.bp.blogspot.com/-4rhVTrp9jSY/Tr6GMKa5orI/AAAAAAAADTw/CNeTxwfJHWg/s1600/DSCF7200.JPG’)[
](‘http://4.bp.blogspot.com/-y0suTgWBshw/Tr6GMrm9lVI/AAAAAAAADUI/Oy_5gyCBSxU/s1600/DSCF7243.JPG’)[
](‘http://2.bp.blogspot.com/-y1zvI46jhvc/Tr6GMXIURRI/AAAAAAAADT8/EqJp3i8MW9w/s1600/DSCF7228.JPG’)
[
](‘http://1.bp.blogspot.com/-wr2DMdceoq8/Tr6GM1UZviI/AAAAAAAADUU/Xv-hRqyiqhA/s1600/DSCF7270.JPG’)
[
](‘http://1.bp.blogspot.com/-175u0IKTZb0/Tr6GNFSQw3I/AAAAAAAADUg/0NK_fSctv9s/s1600/DSCF7275.JPG’)
just posting another home for a set of arceye v2s 
[media=youtube]rnEIoQutGns[/media]
Anyone had any experience modding these into a Qanba Q4? The signal wires go into laptop-styled pin headers, obviously I’d need to break these off somehow onto the Sparky PWM or Jr?
Do you have any pics of the internals? I am unfamiliar with the Qanba style wiring.
Sure here.
I’m still sitting on some stock. If anyone is interested in assembled arc eyes WITHOUT pin headers installed (they will be provided to you, and cable harness and drill template as well), I will sell them below cost at $$2.50 each.
Assembled with pins price is dropping to $3.50 each. I’m just looking to get rid of them now.
Since you’re backing off from the whole thing, will you be releasing the designs so that people can continue this great legacy?
wow,
so the 3 in 1 Qanba system is actually 2 PCBs
Yeah, pretty wierd, lots of places to solder onto but they all look a bit too close for my level of soldering. Do you think it would be a good idea to just poke the extra wires into the pin headers?
another arceye home in the sfxt
[media=youtube]eYtnF3IcsRw[/media]
order for some of the remaining arc-eyes sent
i hope i didn’t snag all of them
from what i heard there are some clearance issues, as to whether or not anyone has solved them yet, not sure.
I’m going to give it a try in a few weeks so i’ll report if it does work then
They do not work…the arceyes are too thick… The plunger will not work properly
and I see someone ball led? how it works?
ball led?
I am sorry for my poor English look#737 how to made the ball of the Joystick light