PZlate - That joystick is in the works. Keep an eye out. 
Rageoux - thank you so much for your business. Please feel free to post pictures once you have finished AMPing up your stick.
Rhombustible - you can pm me anytime here. Looking forward to your requests.
Im looking for a conversion custom panel for a TE to turn it into a hitbox, ninja turtle themed.
Or if you do modding I would be interested in that service as well, to get this thing dual modded.
Hi Suppage. Iād gladly help you out as much as possible. Please pm me with all the details. Looking forward to your business. Thanks again.
AMP Up Customs would like to thank everybody for their support and your business. Today marks our 1 year anniversary. It was a great year and weāre looking forward to the future. As seen in the picture, our hands are pretty full and canāt wait to start working on the future projects.
http://i1333.photobucket.com/albums/w624/ampyourstick/IMG_20140901_173701622_zpsfqqdfnna.jpg
Thank you all again and keep your eyes peeled for a huge announcement coming in the next few weeks.
Very excited to get my hands on a custom Fighting Edge panel.
Hey I PMād you a couple of days ago. Hope we can do business 
All PMās have been replied. Thanks guys.
Looking good! I keep sending folks your way for these things, hopefully theyāve panned out! Keep it up.
Thank you Jasen. My fellow metal head brotheran.
Hello, I would like to know if you were able to fit the hitbox pattern on a quanba q4 plate please ?
I tried to check by merging a Q4 and hitbox pattern on photoshop but it seems the inner space of the Q4 (the plastic) isnāt big enough.
Thank you !
@b00ft00ā
http://i.imgur.com/QpLaA1J.png
Used the Q4 RAF template from Focus Attack as the layout, then dropped the official HitBox layout from their own template into it and aligned it identically. Left the Qanba start button on the face as well. If you like this, it should be suitable for @B-boy Tekken to use. Template is 300dpi. All buttons are 24mm except for the Up button, which is 30mm.
Good luck on your build!
@RageousXā
Thatās what I did too at 1st, then printed it to check the position (I wanted to see if I could push it up a bit) just to find out the inner body opening of the Qanba is much smaller than the plate :
http://i.imgur.com/01VXmBH.jpg http://i.imgur.com/H9hDQag.jpg http://i.imgur.com/r1byAct.jpg
Although it looks like it fit in the last photo, the buttons edges go a little out under the plastic, which is bad for me since I want to use seimitsu screw buttons.
Only 2 things come to my mind :
cutting the plastic, but I would be afraid to break it since itās kinda sturdy.
having a more compact layout, but it might be too cramped.
Hopefully @"B-boy Tekken"ā will have a solution
Thatās more of a tech talk question, then - youāre very likely going to ned to do some dremeling. Iād put this all together in a post and shoot it to the Tech Talk forum, and see if anyone has experience working with the Q4ās limitations.
A little Dremel action will solve all your problems.
Iāll align something up tonight to see how it works. Sorry for the delay.
No worries, not in a hurry as I mainly wanted to know if you already had to deal with this setup and if so, how you did.
Like @RageousXā and @NENDOā said, cutting the plastic to make some space shouldnāt be difficult
Thank you for taking the time to check.
Had a Great week. Shipping out in the morning. Tracking numbers will be sent through pm once available. Thanks again guys.
http://i1333.photobucket.com/albums/w624/ampyourstick/IMG_20140912_170555790_zpsuz1cc4vk.jpg
http://i1333.photobucket.com/albums/w624/ampyourstick/IMG_20140912_162156206_HDR_zpsy1oqgo8d.jpg
http://i1333.photobucket.com/albums/w624/ampyourstick/IMG_20140911_152938757_HDR_zpsktf9ebic.jpg
@ b00tf00 - will do.
By any chance you do a replacement for Hori N3/NX (Soulcalibur V)panels?
Very professional work here, man!
Iām not certain yet that Iām going to go for it, but if I doā¦ would you be able to make a lexan panel for an atrox? I donāt think I saw any of those here, so you may not be doing thoseā¦ just thinking about making mine a six-button. Iām not sure how thick this current plexi is, honestlyā¦
@ Boof. It wonāt work unfortunately. Iād have to move buttons around. Moving the holes isnāt any problem at all. So if you wanted. I could move the punch / kick buttons to an area where it can be cut. Like so.
http://i1333.photobucket.com/albums/w624/ampyourstick/IMG_20140915_075042171_zpsqdmsjygo.jpg
@Frostbiteā - its in the works. Keep your eyes peeled.
@dancemasterglennā - I do offer Lexan for the stick but its a bit difficult. Iāll pm you with more details. And Thanks for the kind words.
