Hi
Ive wired up the 5V on HRAP1 sticks today so they work perfectly with my project boxes , anyway i have one left to do , i just want to double check where the 5v is on the DC agetec PCB , im pretty sure its the blue wire , but can someone confirm , Thanks
found this
The far left connector in the first picture is the buttons. From top (brown) to bottom (grey), the wires are:
- X (Jab)
- Y (Strong)
- Z (Fierce)
- C (Roundhouse)
- B (Forward)
- A (Short)
- Start
- Ground
Left connector on the bottom is the stick connector. From left (black) to right (yellow), the wires are:
- Ground
- Up (brown)
- Right (red)
- Down (orange)
- Left (yellow)
The right connector on the bottom is the stick connector. From left (white) to right (red), the wires are:
- DC_2 (white)
- Sense (green)
- Ground (black)
- VCC (blue)
- DC_1 (red)
DREAMCAST Looking at controller end that plugs into the Dreamcast
___________ | 5 3 1 | \ 4 2 / ---------
Pin Description Standard Wire Color
1 Serial A red
2 +5v blue
3 GND black
4 sense green
5 Serial B white