Acrylic/Plexiglas for HRAP 3/EX & TE, and More - First post updated with Dust Washers

[nomrah]

I’d be interested in a 7 button version of the TE template.

[arthong]

Another Update

Hey guys, got another update for you on your shipping status, for those who haven’t received a shipping email. Update info on the second post of the first page

http://forums.shoryuken.com/showthread.php?t=183029#2

I could probably scan the top plate for you in hi-res (for the green gobline stick). Gotta dig a scanner out of the basement. Failing that I could always just mail one out. Button holes need to be widened out to 30mm though. Oh and I actually was asking if you would be able to make custom plexi for it.

Hey Thirteen, PM me and perhaps we can work something out on figuring the best way to do this. While a scan should work, if at all possible I can have the panel in my hands I can make absolutely sure everything fits perfectly. However, it’ll be a little time before I can get to it. Either case, we can throw some ideas around later.

Hey Art,

I am posting under a 2nd name since I am on my computer away from home.
I posted under the name jayducky on page 3 and you can see the 7 button
vewlix template I am using. I am going to mod my TE so that no visible screws show on the top. To do so I have to alter the red border that comes with the TE. I will completely file away the inside lip of the red border so that the metal panel sits on black. That will give me enough room to flush mount the custom plexi within the red border. I am counting on the buttons and tight fitting plexi to secure the plexi in place. So I will need the dimensions of the plexi to be cut just a hair wider. On pg3 you can see where I want the start button. I will cut a 24mm hole in my metal panel to corespond where you cut the start button. I will have to secure the red border with model glue or something. I think the final results will look elegant especially once the sixaxis mod is complete.:lovin: Let me know if this is OK and I will note the modifications in the special instructions portion of the orderform.
-Jason

Hey J, your request is going to fall into the customized request because I’ll need to clarify things with you a bit more, and will still need some kind of scan or tracing pattern from you. Just pictures won’t give me the exact location of your new start button =). We’ll have to talk more after I get through this initial stack of orders.

Got my covers last week, but been crazy busy. Managed to get one of them on the other day, but I left my camera at work. So: here’s a couple of crappy low res phone pics for now.

Cover was really easy to work with…I love it. Will take a better pic when I return to work. Thanks Arthur, your work is ultra top notch!

Thanks again man! And those are great color combinations. You’ll have to send me a hi-res version when you have a chance. But even still, those phone pics are pretty damn good.

I have a quick question, Would it be possible for you to do a T5 layout? Sorry if its been asked but I am FAR too lazy to look through 7 pages. Also how long would it take if I sent you art and ordered a TE layout?

I’m working with someone on the T5 layout, and if all goes well I may have something by next week… or mid next week.

As for the time it takes, I have a 7 day estimate posted on my site from the date you ordered. So if you go to the product’s page, it will give you an estimated time. I plan to lessen this timeframe but because of the big load that came in on launch, I’ve got a lot to do so I need some buffer time. Adding art might take an extra day or two, depending on interaction time.

I’d be interested in a 7 button version of the TE template.

I’ve been asked that a few times and I keep forgetting to add that option =P. Just too busy. But I’ll try to add it soon! Thanks!

[Mystic]

Oh its fine, I wasnt expecting a super fast delivery lol. I might pick up a TE layout from you in the next few days. Seeing as how I got art from glory…Oh shit I still gotta pay him.

[Kojiro]

Any word on how the art printing is going?

[arthong]

Any word on how the art printing is going?

Picking up the prints today! Sorry, haven’t had a chance to update the ppl with the art requests.

[Kojiro]

Cool, i’ve never actually seen prints by kinkos, so im interested to see how these are gonna look.

[arthong]

Cool, i’ve never actually seen prints by kinkos, so im interested to see how these are gonna look.

I’ll send you a pic tomorrow once I get a chance to cut it =)

[AndY0ne]

you want buisness but can’t answer a simple question, that’s kind a bad, or more disappointing

[SmoothCat]

cant wait! woot!

[arthong]

you want buisness but can’t answer a simple question, that’s kind a bad, or more disappointing

Sorry Andy,

I haven’t gotten to answering every question in my PM box, nor my emails. I get off work at 7pm, then stay up until 3am last few nights trying to fulfill orders then going to work 4-5hrs later and repeating the process. In between I have only so much time to answer inquiries, and there were a few people ahead of you waiting for their answers from yesterday in my PM box.

So I’m not just sitting around watching TV and having a beer. Please bear with me , your question will be answered soon.

[AndY0ne]

Sorry Andy,

I haven’t gotten to answering every question in my PM box, nor my emails. I get off work at 7pm, then stay up until 3am last few nights trying to fulfill orders then going to work 4-5hrs later and repeating the process. In between I have only so much time to answer inquiries, and there were a few people ahead of you waiting for their answers from yesterday in my PM box.

So I’m not just sitting around watching TV and having a beer. Please bear with me , your question will be answered soon.

heh im sorry for sounding so harsh, i guess im eager to get the template going ^^
now when i know your status, i will sit at my chair waiting

[TRiXWoN]

Awesome

Just got my TE plexi from art and i must say its perfect… very clear and smoothly cut. I ordered a different overlay from some large distributor and the cuts weren’t perfectly smooth… VERY nice! :lovin::lovin:

[Milkham]

I just got my replacement hrap cover gonna swap it tonight!

[azido]

Got my cover today! Arrived in great condition, packaging was EPIC, and the product itself is immaculate.

I was another pain-in-the-ass international buyer (from the UK), and Arthur really went out of his way to help me find a shipping solution to suit my monetary circumstances (broke ass student over here :sad: ). Thanks a lot man!

People, buy from this man! You won’t regret it!

[System_1]

Dont think i ever posted my finished stick with the 1/16" Since it was before this new thread. I was out of the first initial batch. :tup:

http://www.empty-site.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=2573

[arthong]

Thanks again guys! Still keeping busy.

The rest of the 4/8 orders have shipped except for a few that have custom art cuts. Those are being worked on tonight and will ship tomorrow, as well as a few more, if not the rest of, the 4/9 orders. Catching up from the big initial batch of orders and will have a lot of dedicated time this weekend to address everyone else. Thanks all!

[Imitrex]

Awesome looking sticks! Keep the pics coming. Love seeing HRAPs finally with different art/themes.

[SiLo]

any plans for hrap2’s ?

[aLee]

^
hrap2 and the hrap 3 are the same in terms of button layout and turbo box. You can just pick up the one labeled for the hrap 3

[Kojiro]

Thanks again guys! Still keeping busy.

The rest of the 4/8 orders have shipped except for a few that have custom art cuts. Those are being worked on tonight and will ship tomorrow, as well as a few more, if not the rest of, the 4/9 orders. Catching up from the big initial batch of orders and will have a lot of dedicated time this weekend to address everyone else. Thanks all!

Ooh that mean Koji’s done soon?