if you want it without the turbo box order the T5 plexi and if your using OBSF30s order the regular $9 art print
Thanks!
Oh man… just a quick update before I finally get some sleep.
Haven’t had a chance to answer a lot of emails nor PM’s this weekend. Mainly because of this…
A whole 8ft+ of boxes to package up with whatever remaining weekend I had. Actually out of stock right now for more customized requests. Getting more stock soon, but there’s more concentration on getting the long list of artwork requests taken care of first.
Will catch up with you guys soon. 
Wonder if one of those are mine 
I can’t wait to see what mine will look like on my TE!!!
just got mine. packaging was pro. unfortunately i have no art to put underneath so no mounting yet, but they sure look pretty.
lmao… the postman is gona shit himself if he has to pick those up.
hey Arthong I’ve noticed that on the top left corner the plexi bends a bit on both the TE and HRAP covers
Pics:
http://i6.photobucket.com/albums/y228/MKS_hope/Plexi/DSC01338.jpg
http://i6.photobucket.com/albums/y228/MKS_hope/Plexi/DSC01347.jpg
http://i6.photobucket.com/albums/y228/MKS_hope/Plexi/DSC01339.jpg
http://i6.photobucket.com/albums/y228/MKS_hope/Plexi/DSC01343.jpg
Think this was mention before, but just wanted to make sure, and now some pics of it.
There is also a smaller bend on the top right of the TE
nvm found that loosening the screws a bit fixed the problem
You’re tightening it way too much if youre causing it to flex like that or didnt have it aligned properly before seating…
it looks like your art isn’t cut out very well. the excess is on the raised part of the turbo box. i had this problem until i ordered arthong’s art cutting service, now it sits a lot more flush.
Yeah I only keep mine barely snug. No need to crank them down.
This actually happened to mine as well. I will try and loosen the screws a bit when I get home and that hopefully fixes it.
Hey Arthong, Do you happen to have any pre-made templates to choose from?
All you really need is finger tight. Just enough so they don’t vibrate loose
I would do more than finger tight. I don’t have that problem and mine are pretty tight. Make sure you’ve got it seated well
Another Update
Alrighty, another quick update.
Updated the FAQ a bit. Been having some questions of why Shipping was so expensive to foreign countries, and some questions on my email response time, which I apologize for being a little slow but a reminder that I have a day job and I’m not just sitting around eating twinkies.
Just got some new acrylic stock so more work to be done.
Been a little behind on artwork submissions. But I’m loading up a huge batch of them tonight be printed and cut tomorrow!
A new prototype is done, for the VSHG!:
Basically was lent the VSHG panel so I don’t have the actual stick to test it out on. I just stuck it on the panel and made sure the buttons and other holes are aligned.
This prototype is being sent out so the original owner of the VSHG can test and confirm everything before I make it available.
Now, next cover concentration goes to the SE…
lol, nah I had to throw it all in my trunk and back seat. It was the PO clerk that shit himself when I piled it all onto the counter.
Yeah, along with what others have mentioned, there is a little extra space in the screw holes to give you a little adjustment room. Obviously the buttons go in first to position it, but after positioning the screws in place don’t tighten them all up first. Make sure the alignment is in place and tighten a little bit, one screw at a time. Make sure it’s all fit before tightening the rest of the way.
I guess I’ve done it so many times I didn’t really think much of it until this issue has popped up a couple times. I need to get some time to make a tutorial so it may help answer more questions on this.
I’m assuming you’re referring to Art templates? Sorry but at this point I’m not selling any specific art templates. Main reason is I’m working under the premise that I’m selling my services to cut the art you acquired by permission of the author. I don’t sell the actual art so that it doesn’t appear that I’m profiting off of someone’s work.
Thanks again everyone! Been keeping real busy =)
HOLY COW!!! 
looks like business is booming…soon art is going to have a warehouse hehehe.
howmuch again? do u make them for mayflash fightsticks?
Hey Art I got a question, once you start taking custom orders how large can you make it? I plan on making a custom stick and right now the its looking to be about 20"x7.75"
Hey Art, are you cool with the JPEG I sent you? Or do you want me to upload my PSD somewhere? The PNG version was 2MB too big for la.gg =( In case you’re wondering which one I’m talking about, it’s the FF13 TE art. lol