You can replace the TE PCB with Multi-Console Cthulhu.
is there any device that can convert a stick to a wii? in example using a PS3 stick on the Wii? or anything down those lines
You can get the PiiWee mentioned above, or get a MC Cthulhu, which will make it work on games that support GameCube controllers and be able to keep your PS3 controller functional. Warning, not all wii games support gamecube functionality.
What is the tool I need to remove the nuts from the hrap line sticks, like some type of socket wrench? Specifically, I need it for my PS3 SF4 HRAP3
7mm socket wrench.
Thanks, I somehow got them out with a regular plier lol.
Do you know how I can take out the buttons of the hrap3? One button is stuck…
**Is there a way to use my classic controller pro on my 360?
EDIT
Or, as option 1 use the Classic controller on a Xbox Original.
Question/Option 2: I heard you could put 360 controller guts into the Classic Controller, I just don’t know how’d that work with the Analog sticks being in two different spots.
Question/Option 3: I have seen there are boards to do this kind of stuff for Fightsticks, but is it possible to do this with gamepads? Like modding the controller by adding on a board to work on other systems.**
Whats the best way to prevent the art from my seimitsu buttons from moving around?
I use a tiny amount of pritt stick glue on the back of the art.
It’s not too strong, It’s enough to stop it from moving and weak enough to be peeled off to be replaced.
Essentially, the stuff you used to use in elementary school to cut and stick :3 Just a light dab will do.
what’s the difference between hori sticks and madcatz sticks? i know that the TE of the madcatz uses sanwa parts, what type of parts do horis use? stock??
I saw a new hori fs-ex stick online at hori japan site and it’s wireless unlike the others, is wireless bad or just as good as wired?
Ew, so I was winning a bid on a Dual Modded SE stick for $45, then it jumped to $102 and I let the dude win it. Doesn’t seem worth the money if TE S is so much better. I badly need a dual modded one though.
Does anybody know where to get the grey ribbon connectors found in the TE stick? I’d like to order a few for each kind before dual-console modding, just in case.
JST PH Connectors.
http://www.jst-mfg.com/product/detail_e.php?series=199
JST XH Connectors.
http://www.jst-mfg.com/product/detail_e.php?series=277
Thank you!
The Female Connectors fit on all Seimitsu buttons (30mm), right?
I had my 360 stick dual modded for the ps3 and i just noticed the L2 and R2 buttons don’t register on the ps3, but the LT RT do register on the 360. What’s wrong here?
sounds like theres something wrong between the triggers and the 360 side of the switch
Is there any joystick out there that will fit in a stick case of a height of 1.5 inches?
Hi guys, I apologize if this is the wrong place to post my question but it seems appropriate.
I have a Hori EX2 stick and I am looking to dual-mod it so it can work on both 360 and the PS3. I’ve read a lot of threads on the topic but it seems very technical jargon-y and a lot of information to digest. I see I need some sort PCB and I see a lot of options like the Teasy, Cthulhu, Chimp etc. What would be my best option if I just need it to work for the 2 aforementioned systems and prefer to solder as little as possible? Which option would be simplest/fastest to do?