The wait is almost over! I have confirmation that the shipment of bare pads will arrive on Thursday afternoon! Just in time for some Friday Shipping. It’s going to be a late night for me on Thursday but potentially a great Monday for a lot of folks who have pre-ordered!
Need yours? Get on the list and ensure a launch day shipment at www.JasensCustoms.com
Just put an order in. I’m pumped!
Awesome!
All,
I realized that the shipping charges for the XBOX ONE PCB was $6.99 and its about $1 too much. I have lowered this to $5.99 on the listing (this is for US Only).
Hey? WTF? I Pre-Ordered mine and paid $6.99!
I will be sending you the $1 refund! Probably in the form of a $1 bill with your order 
If you are like me, it’s the only cash you will have on you.
Why the change?
A small Flat Rate box is only $5.80 for shipping. The box is free. I have a lot of packing material that costs very little. PayPal takes 3%. I’m not interested in making money off of shipping. Packing up orders is part of the cost of doing business. This isn’t in response to anything particular, it’s just good sense to be transparent with shipping and making it worth your while.
Great! When are these things shipping?!
FedEx updated their tracking info and of course it says Monday. I should have kept my mouth shut so that I didn’t jinx it. Unfortunately, I did and it looks like delivery is by Monday 3/31. All orders for the PCB will get packed up and shipped that day.
Do I really need this? Isn’t Akishop working on upgrading the PS360+?
Yes, they are WORKING on the upgrade. Its not done and despite some misleading information available, there is NO ETA on this being released publicly any time soon for XBOX ONE or PS4. That being said, PS4 is supposedly working and out to beta testers! Akishop recognized the value that @Phreakazoid brought to the table with the CrossBone and got a source for bare PCBs at a great price. If you want your stick to work with an XBOX ONE, a PADHACK or CROSSBONE is the way to go for the immediate/near future.
XBOX One PCBs arrived today! That means they start shipping today!!
Just ordered one, coz why not!
Quick question: are these OEM? and are the headset connector intact?
ps: Haven’t been here in awhile, now I’m back!
I just posted a few pics of the pcb on my Facebook site. The appear to have all external connectors. Admittedly, this is one product I haven’t had time to tinker with… I feel a bit like A walmart manager right now. You know the type, I’ll sell it to you because you want it but I can’t answer squat about it! It’s a first for me… So I have to do some checking.
As for OEM, Akishop Customs informed me they were originals.
lol understandable! I just think it’d be good information for others just in case they were curious as well… I guess I’m gonna have to check FB to see the pictures! But nonetheless, I’m glad you’re selling this to help FGC same some $$! :thumbup:
DJ,
After looking closely at some pictures of official accessories, the controller in its plastic shell, and the PCBs, the bottom port is connected and in tact. This is where the headset gets plugged in!
Jasen
https://scontent-a-iad.xx.fbcdn.net/hphotos-ash3/t1.0-9/10012987_1565775740315109_1915818898_n.jpg
https://scontent-b-iad.xx.fbcdn.net/hphotos-prn2/t1.0-9/1375885_1565775683648448_43952048_n.jpg
https://scontent-b-iad.xx.fbcdn.net/hphotos-frc3/t1.0-9/10157195_1565775716981778_2049616754_n.jpg
AWESOME!! You should def. upload that on FB as well if you haven’t already… I’m sure people will like that it’s still intact! This way, we can still use headsets unlike the TE2, which it currently doesn’t have…
This is one of the reasons why I’m going this route, instead of just getting the TE2. Thank you sir for providing those pictures!
No problems! They are linked right from the Facebook page! Guess I’ll have to add them to the listing on my site too
Still have a few of these on hand ready to go! I’m working with @Phreakazoid to carry the Crossbone in the shop as well. I have a few ideas on how to make a great combo back out of the entire trio of parts (Crossbone, PS360+, XBONE Pad).
More to follow!
Glad to see that this initiative went through nicely!
Sadly, even though I already have a case gutted and ready for an XBO PCB; unfortunately, the flat rate shipping costs to Canada negates the savings; for a single PCB, at least.
I can always ship much cheaper with First Class if you are willing to wait a few days more! I’ve helped a number of this north of the border and across the pond that way!
About to order mine. Can’t wait! Am I correct in seeing the Xbox button’s LED on the board?
This is such a great idea. Thanks for doing it!
I got mine same week when I ordered it. Fast shipping! Now just waiting for the crossbone so no stress of soldering
I looked at the board today and saw the surface mount LED. So, yup! It’s there!
Yours shipped today. Got it in the mail before work at about 5AM.
I am working some things out for the Crossbone launch to make everyone happy 
No flashy announcements yet… Just keep an eye out!
@"Jasen Hicks" : You are the man. This is the most excited I’ve been for a project in ages. 
Awesome!