Thank u.
Decided to stop lurking and make an account just to post here.
ordered on Thursday arrived Monday, was very easy to assemble.
obligatory bad cellphone image
https://imgur.com/WQUFGo0[details=Spoiler]
[/details]
Will be checking back after deployment for that frosted black hitbox plexi, if you decide to list it again I will be snapping one up.
Hey everyone! I want to thank everyone for the continued support. I havenāt been active much due to the ramp up in deployment related commitments and a number of questions I have been asked via various channels. Going forward I would encourage everyone to ask questions via the new Jasenās Customs Help Desk. This allows me to answer a questions once, post it up as a Frequently Asked Questions and build a good Knowledge Base for the Jasenās Customs fans to use. I just set it up and I consider it ābetaā but it makes it easy for to monitor Facebook, Twitter, and the actual support desk from one location.
https://jasenscustoms.zendesk.com/
I am sure many folks are curious what Julyās special color isā¦ letās just say its going to be ON FIRE. I hope to share the new color soon, we prepped this month a bit better by having a few made and ready to ship straight away. If the Emerald color from June was any indication, I donāt expect the first ones on the shelf to last very long!
@āJasen Hicksā I just received my PFS3 emerald diy kit and the plexie I recived is light blue ānon see throughā and all scratched up bad. Wasnāt I supposed to receive a clear see through plexie and of course not all scratched up with protective covering on it? Everything else is fine but the plexie I recived is garbage and has no protective covering on it.
That light blue film is the protective sheet.
Since this is a common misunderstanding, I have created an Knowledge Base Article here about the plexi:
Thanks Iām use the the paperback peal off. Thatās bl u e protective covering is on there good. Feel like a dunce lol.
It happens to the best of us. This actually reminded me to add the questions to the FAQ portion of my new ZenDesk help system. The KB is far more responsive than I am at times since its always available.
Jasen
Jasen is the man, still loving my Panzer FS3!! I need to get some sexy artwork under this plexi soon. oO
http://i.imgur.com/eNjN9Be.jpg
http://i.imgur.com/PRdWXlo.jpg
Thought Iād share that the crown 309mj does fit in the PFS3. The only issue I came across was when I dropped the stock dust washer into the plexie joystick mount hole it restricted full throw onto the joystick. I just had to leave the dust washer out from the inside of the case. Not a big deal to me but thought it was worth mentioning.
Unfortunately, I will not be attending EVO 2017. Aquaman, Namor, and I will continue to protect the seven seas during the seemingly never-ending deployment. Even though I canāt be there in person, I know many Panzer Fight Stick and ADCAP owners will be with FightSticks and SuperGuns in tow. I am calling on the community to be on the lookout for members of the Panzer Brigade and serve as the official Jasenās Customs Paparazzi Squad during EVO 2017! Participate and be rewarded handsomely with a one-time use 10% off coupon that NEVER EXPIRES and is valid on EVERYTHING in the shop. Hereās what you do:
Snap a photo of a Panzer Fight Stick and itās owner. Please make sure they give you permission!
Tweet it to @JasensCustoms with both #PanzerFightStick and #EVO2017
Thatās it! Not on Twitter? No problems! Facebook works too! Just be sure to post it to the Jasenās Customs Facebook Page and use #PanzerFightStick and #EVO2017 in the post!
After EVO 2017 is over, I will create unique single use coupons and distribute them via Direct Message (Twitter) or Private Message (Facebook). Please give me a few days to get them out as its one of the few āmanualā things I have to do still!
General Rules:
[list]
[] Photo must be taken during EVO 2017 and at the venue or surrounding hotels.
[] Photos must be posted during the official EVO dates: July 14 - July 16, 2017. Late submissions will not be considered.
[] Tweets or Posts must include @JasensCustoms and both #EVO2017 and #PanzerFightStick
[] One coupon per person will be issued. Additional coupons for the those hyper-engaged may be issued on a case by case basis at JasensCustoms.comās discretion.
[*] Disclaimer: This promotion is not endorsed by EVO in anyway, shape, or form. Use of their logo, names, etc. are to convey the timeline and scope of the promotion only.
[/list]
Itās inventory week starting 7/10 and going until 7/17. This is the most dreaded week of the year because itās boring and not even remotely fun. We chose to do it during the week leading up to and including EVO weekend because it will be a convenient time to stop, finish getting orders our that are being finished up, and get a good solid count of everything, and I suspect a lot of folks will be travelling to EVO.
Orders will be shipping that week, just no new orders will be taken. The site will be closed, but we will be available at the Help Desk, Twitter, Facebook, and of course email. If we finish early, we will open up early. If we finish late, we will extend it a day or so as appropriate. Once the site does open back up, we should be launching the Procable connector kits. More details on those will follow in the coming days.
Julyās special color run is HOT! The Panzer Fight Stick FIRE RED will be available for order once we reopen from inventory. We got this one started a bit late due to EVO, a lot of orders coming in, and just general other work that had to get done. Of course, it will be available in all of the styles: Standard, Korean Edition, and Hitbox layouts. The fire red is a glossy red finish and will look awesome with some of the black gloss plexis that will be available to order too!
Quick question- are the sides of the pink panzer white or pink?
Stupid question, @"Jasen Hicks"
Will you be selling more arcade cp reproās when u get back?
They are Pink.
Yes, though I may be doing them slightly different. More to follow when that happens this fall.
Thanks!
Followup up question- Is this the correct switch I should purchase to replace the 2 black ones that come with the panzer 3? If not do you know where I can get 2 white ones? Thanks
Someone else asked a similar question, but they wouldnt work. I need to see a datasheet to be sure. Most non-cherry switches have an extra ānubā so they wont work.
Yeah, I too would love to get verification on white switches that would work!
Well if anyone figures it out and can let us know Iād really appreciate it. If anything ill just end up painting the black ones when my panzer 3 arrives so they match the white buttons im going to order.
Are the pictures for each case true to color? Iām more interested in the purple case depending on the purple.
I white balance the stock shots and color correct to make them as close as possible on my calibrated screen. Since there are wide variations in monitor settings I canāt guarantee that what you see on your screen will match what I see on my screen or others. You should take a look at my Facebook page (linked in my signature) to see photos submitted and builds posted to see the variations to make sure its within your expectations.
Awesome. Thanks for your time.