Greetings from Kuwait! On a layover right now… Saw the question.
I have to check the mounting pattern of the LS-32 to see if it can work without a paradise plate. I know one of the Seimitsu levers do for sure but can’t remember which it is.
I’ll find an answer when I can get to a regular computer and can do a bit if research.
Jasen told me fender washers work well too.
Any estimate on when you’re going to have 3d printed jlf spacers available for order?
LS-40 is the one I verified the fit of, haven’t tried any other Seimitsu levers.
I’ll keep that one in mind.
I’m sad the upcoming Korean Edition is viewlix, if it was a Noir layout it would be just about perfect. I’d get an Omni, but it would still lack gamerfinger buttons (and there’s the expensive shipping from Korea).
I can promise Jasens is better than the omni. If I were you I would either a) learn to live with Viewlix or b) just buy a custom panzer with the specs you want.
Then the 32 will fit too.
Just looked up Seimitsu sticks and I’m seeing others besides the LS-32 and LS-40. Choices, choices…
Ok, Here’s the skinny on the studs for the Lever mount:
Image below:
JLF Mounting Plate:
JLW Mounting Plate supports the PFS:
Seimitsu Mounting Plate MS (LS-33/LS-33-01, LS-55/LS-55-01 and LS-56/LS-56-01) Supports the PFS:
Seimitsu Mounting Plate P40 (LS-33/LS-33-01, LS-55/LS-55-01 and LS-56/LS-56-01) Supports the PFS:
Seimitsu Mounting Plate RE ( LS-32/LS-32-01 and LS-40/LS-40-01) Supports the PFS:
I should also add that the standard ls40 plate was designed for a flush mount, so you won’t need any spacers or alternate plates to get the optimal stick height with Jasen’s mounts.
Just wanna say that I love your cases… Might use one soon…
You should. He’s a saint. I probably annoyed him so much that if he hired someone to kill me it would be ruled justifiable homicide.
Have you used an Omni? Have you touched one? If not, how can you make this promise?
I’ve seen and handled (laugh’s stick, who designed and got the sticks manfucatured of all people’s Omni to try out) both sticks first hand. They’re both high quality and highly durable sticks. Not taking anything away from Jasen here as this is his thread and the quality on the PFS is pretty nuts, but this post is seriously misinformed.
I actually have played with the omni and felt Jasens construction to be of higher quality. Just the way it feels on your lap makes a difference.
I’m sorry. I shouldn’t heave been as extreme in the post. There’s no way for me to say what someone else may or may not like more than something else.
Those Atomiswave panels look great! Always wanted a head to head setup with those. Dreams…
Thanks NENDO!
For everyones reference, he is talking about these (posted on my Facebook Page):
Any idea when your new plug and play supergun board is gonna be available? I need to swing by and would like to get everything I need In one fell swoop
I sent you a message on FB about the K-Panzer 
I have no idea what you are talking about 
This is supposed to be on the DL! I have a custom part being made right now for the board. Unfortunately, it wont be here for about 2 weeks (I think). I will do a limited number of beta boards (5 in total) 4 of which are spoken for by folks who asked to be in line for a SuperGun. These will be my test bed for the platform. Once I verify its all good to go (which based on the Alpha testing that is on going should be a simple check only) I will have a number of the boards manufactured and ready to go. One big part is getting those sexy MK30 cases modified to support the new tech.
Korean Panzers are on hold until late August. After being gone last week the Middle east, having to go to Hawaii for a conference next week, and then back to Europe the following week my day job schedule simply can’t support building all 10 of these sticks out properly and on schedule for a July launch. Couple it with the lack of PS360+ (I had to tap into a few I set aside) it makes sense to wait to make them. I am considering a case only run of about 5-10 for those who want to provide their own parts and build it out themselves. If I decide to go that route, it will be a plain version of the case, i.e. without the digitally printed art onto the metal. Same colors though.
Jasen
What are the dimensions of the Korean case? I’m assuming it’s taller?