that Giger is intense! XD
Here is a stick that I finished a short while back. Cool how some customers choose to theme their stick in a non-fightgame style.
The Tidal stick:
Thanks. That’s the one that i’m currently working on and i’ll put a lot of extra love into that stick 
Love the cases man!!! You have all your prices listed for all your blank cases except you “boxer” and “dictator” cases. How much are those shipped to the US?
I had to pull the Dictator and BOXer because the fabrication of those went through the roof. They ended up being 3 times the price of the initial quote.
I’m currently working on finding another way to offer them again.
Here are some of the new sticks that i’m working on or that were just finished:
Custom Captain America stick:
Custom MvC3 stick. This stick will be given away FOR FREE at a dutch MvC3 pre-release party that i co-sponsor:
Custom Cammy stick:
Custom Afro Samurai stick:
Custom Chun Li stick (finished)
<3 the Tron Cammy!
Hi again, im definitey intrested how much roughly for a full custom stick wit shipping ?
They would start @ 260 US shipped (depending on Dollar/Euro rate). But you can use the configurator on the site to do a calculation of the stick. Here it is : http://shadaloo.eu/index.php?option=com_virtuemart&Itemid=14
Here is an example of the first few steps:
Ok i got that stick config thing working i got a couple of questions can u do a 6 six button lay out and is it possible to get some artwork on the bottom panel ?
6 button layout is no problem. Any form or layout can be build. Artwork inside the stick is free of charge when the plexi bottom is chosen. If you want artwork on the bottom so you can’t see the inside can be done. It requires the plexi bottom upgrade and an extra 7 euro for the print and labor.
If you want to mess around with the button layout, i’ve put a template on the website (@ DIY artwork).
Ok I wanna ask how much to build the akuma bloodrage stick like the exact one u have on the wit black buttons an balltop wit 6 button layout shipped to Australia in $US ?
and with a dual mod.
Just Pm’d
Base unit would be ? 209 including dualmod.
Bloodrage artwork is free
Custom button layout is ? 2,95
Black buttons (Sanwa) and black balltop are included.
I would advice the plexi bottom (? 7,95) and alu feet (? 5,95).
Shipping is ? 35
Total in euro’s would be 260,85.
Depending on exhange rates it would be around $ 360
A couple of weeks ago I was contacted by Warner Bros to build them a custom arcadestick to help them promote the release of Mortal Kombat. So I’ve build this stick for them so they can award these babies to the winners of the Dutch and Belgian MK championships. There will be a third stick build that will be given away in a sweepstake by a TV magazine.
The limited edition of MK will not be available in the Europe and for what I’ve seen from the pictures of the included arcadestick, we’re better of without it
Here is my official Mortal Kombat stick:
Very nice stick good job
OMG!!! i just took a full hour to write a complete step by step build log of this stick and clicked accept and got “server too busy”!! The whole thing is gone…
Here are the pictures of the build so far:
Specs:
- Stealth black paint
- Sanwa JLF stick
- Seimitsu PS-14-KN buttons
- Seimitsu LB-39 bubbletop
- Compatibility PS3 + Xb360 + PC
- Custom painted aluminum feet
- Artwork on top and bottom
- Artwork in buttons
- 3 meter cord
Step 1 : The parts
http://farm6.static.flickr.com/5052/5535799200_a883d40fab_o.jpg
Step 2 : The case
http://farm6.static.flickr.com/5218/5535220209_45014aaeef_o.jpg
Step 3 : Smoothing
http://farm6.static.flickr.com/5137/5535798894_7caedc02e3_o.jpg
Step 4 : Primer
http://farm6.static.flickr.com/5011/5535798954_efcf176411_o.jpg
Step 5 : Stealth paint
http://farm6.static.flickr.com/5134/5535220403_9c4378c100_o.jpg
Step 6 : Button plate
http://farm6.static.flickr.com/5150/5550797152_495c644e19.jpg
http://farm6.static.flickr.com/5297/5550215587_bbc544f53b.jpg
http://farm6.static.flickr.com/5138/5550215683_9ca599f7f4.jpg
http://farm6.static.flickr.com/5066/5550797444_d58a3336ac.jpg
http://farm6.static.flickr.com/5300/5550215857_eab6304a87.jpg
Step 7 : Artwork
http://farm6.static.flickr.com/5291/5550216305_8059a1244f.jpg
http://farm6.static.flickr.com/5259/5550797624_1d8ce26f7d.jpg
http://farm6.static.flickr.com/5027/5550797712_c8a41db32c.jpg
Step 8 : Buttons
http://farm6.static.flickr.com/5057/5550216483_220925fed4.jpg
http://farm6.static.flickr.com/5018/5550797816_c941b44e0b.jpg
http://farm6.static.flickr.com/5181/5550798000_e38e6d9c7e.jpg
http://farm6.static.flickr.com/5261/5550798210_ecfcc784c7.jpg
A sneak peak of 1 of the 3 sticks and 1 of the 32 shirts for Warner Bros:
http://farm6.static.flickr.com/5296/5550216671_18dd21b0af.jpg
http://farm6.static.flickr.com/5059/5550798452_a3b51b38a8_z.jpg
More to come 
Jinxz, did you get that thing I sent you? 
I know this is your stick casings thread. But I was wondering if there’s any news on the Scribblenauts shirts? Didn’t want to drag another topic up when this thread’s more active.