WTS: Custom Sanwa Arcade Stick(s)

System_1 · February 24, 2009, 9:12pm

Repeat Customer

Long time no see, Noel.

I sent you an email.

I realize that I may not be able to get another stick from you anytime soon, but I figured I would throw my name out there.

aside: The new rules say I shouldn’t post here unless I have 100 posts… but I already ordered a stick from Noel 2 years ago. Hopefully I don’t get banned…

versus_addict · February 24, 2009, 9:31pm

Is the green home button on the side a Seimitsu PS-14-KN?

Those are the buttons I’m using for my Finkle stick, looks like they are pretty wide…how did it fit? Flush?

If you had used all PS-14-KN buttons would there be clearance issues?

Stick looks awesome BTW.

Thatman_Blaze · February 24, 2009, 10:23pm

http://img17.imageshack.us/img17/2005/imga0461dc0.th.jpg
http://img16.imageshack.us/img16/1310/imga0460ol8.th.jpg
http://img12.imageshack.us/img12/1866/imga0459oa9.th.jpg
http://img11.imageshack.us/img11/4513/imga0457fq4.th.jpg

just recently got this and swapped out the art. it was my first attempt and i am doing it tomorrow. You will see a piece of trash in the upper left corner but i knew it was there long before i was finished and didnt really care… its a seimitsu stick. i just didnt install it before the pictures were taken. i plan on taking some more tomorrow or so outside after i get done with the art swap. the stainless steel is in good shape.

Ephidel · February 25, 2009, 4:25am

06s arent affected.

Halvie · February 25, 2009, 6:12am

what is the grey plastic looking thing sticking down from the face of the stick (first pic)?

prez · February 25, 2009, 8:21am

Soooo excited should be getting mines sometime this week or next

Esjihn · February 25, 2009, 8:29am

Yo finkle sent you an email a couple months back wondering what is the wait to purchase a stainless steel case?

networkingyuppy · February 25, 2009, 1:14pm

I’ve already waited for 4 months, and I still haven’t had a response since I emailed finkle. Hopefully, patience will pay off and my order will be finally taken.
BTW finkle, I sent a Pm

System_1 · February 25, 2009, 1:36pm

That’s the green KN, correct. It’s perfect. The buttons on the side of it are 24mm, not 30 mm. My other buttons are PS-14-GNc (clear plunger) and are the exact same size. They feel the same when you hit them as well. The only clearnace issue I have is that the case is like less than 2 inches tall so quick disconnects won’t fit unless I bend the prongs on the bottom of the button.

I’m trying to see if I can find dimensions for the case now.

versus_addict · February 25, 2009, 9:09pm

Thank man, I’m soooooooooo psyched to get my Finkles for HDR and SF4!!!

gbursine · February 26, 2009, 9:19am

finkle, whats the queue list look like? (I email’d ya a while back too)

System_1 · February 26, 2009, 8:49pm

yeah i am wondering also

finkle · February 26, 2009, 9:38pm

queue is very backed up at the moment, i’m pretty much gonna be locked down for at least 3 weeks before I can take orders again. I might be able to squeeze 2 more orders in but that’s it. I’m literally getting 30 or more emails/day in requests. I would love to take all the orders but it’s just too much for one person to do. I can’t even answer my email right now as it would be a full time job (not bragging, very true)

like I said, I can take 2 more at the most then I need to finish up all the orders I got going right now.

ps3 or xbox 360 based sticks, with standard sanwa parts would run around 210usd shipped anywhere in the CONTINENTAL united states or Canada. optional parts/more experience parts will cost extra. serious inquiries only at this time as I cannot keep up with the flow of email at the moment and don’t wanna leave people hangin’

thanks guys/gals for all the support and overwhelming demand

take care
Finks

Tyranidman · February 26, 2009, 10:48pm

finkle:

queue is very backed up at the moment, i’m pretty much gonna be locked down for at least 3 weeks before I can take orders again. I might be able to squeeze 2 more orders in but that’s it. I’m literally getting 30 or more emails/day in requests. I would love to take all the orders but it’s just too much for one person to do. I can’t even answer my email right now as it would be a full time job (not bragging, very true)

like I said, I can take 2 more at the most then I need to finish up all the orders I got going right now.

ps3 or xbox 360 based sticks, with standard sanwa parts would run around 210usd shipped anywhere in the CONTINENTAL united states or Canada. optional parts/more experience parts will cost extra. serious inquiries only at this time as I cannot keep up with the flow of email at the moment and don’t wanna leave people hangin’

thanks guys/gals for all the support and overwhelming demand

take care
Finks

I’d take one of those spots if possible :). Tried to PM you but your box is full, i was looking for a 360 all sanwa stick, i could paypal asap.

STEZO_ONE · February 26, 2009, 10:55pm

i will take a empty case if there is a spot left

System_1 · February 27, 2009, 2:40am

Damn, it looks like I was too slow.

I am now looking for an empty ps3 case instead of a full stick (I have a Chuthlu on the way).

PM me (since your PM box is always full) or email (mentallyinept@gmail.com) if I can get in.

System_1 · February 27, 2009, 3:22am

Hey Finkle,

If it’s still available I’d love one of the spots. I’ve got the money sitting around for a stick so I’m ready to spend it!

System_1 · February 27, 2009, 5:45am

that stainless steel stick is amazing

Twilight_Crown · February 27, 2009, 9:36am

finkle:

queue is very backed up at the moment, i’m pretty much gonna be locked down for at least 3 weeks before I can take orders again. I might be able to squeeze 2 more orders in but that’s it. I’m literally getting 30 or more emails/day in requests. I would love to take all the orders but it’s just too much for one person to do. I can’t even answer my email right now as it would be a full time job (not bragging, very true)

like I said, I can take 2 more at the most then I need to finish up all the orders I got going right now.

ps3 or xbox 360 based sticks, with standard sanwa parts would run around 210usd shipped anywhere in the CONTINENTAL united states or Canada. optional parts/more experience parts will cost extra. serious inquiries only at this time as I cannot keep up with the flow of email at the moment and don’t wanna leave people hangin’

thanks guys/gals for all the support and overwhelming demand

take care
Finks

I also wouldn’t mind taking that spot. If its still open email me at poringhats@hotmail.com. Or PM. If you remember my email, we talked way back in November.

rukawa_kaede · February 27, 2009, 11:14am

hey finkle that’s not fair I told you first

mine is easy by the way, just the case

I want a case exactly like this one but for a happ stick instead, keep the sanwa buttons but I want them straight, not curved. Also keep the slope of the box and the art I’ll email to you later on

you know I can take care of the art if you want just make things easier for you

email sent