Using the stock PS4 TE2+ PCB in a Xbox 360 TE Round 1 stick - Playstation button

Tech Talk
1

Hi all,

I have a left over ps4 TE2+ pcb after upgrade to a brook board and would now like to use it in my old 360 TE round 1 stick. Is there a way to use the TE2+ pcb without the playstation button on a PS4?

If not could somebody confirm which points on the photos I need to connect if I want to use the current xbox button in the TE round 1 stick as the playstation button. Would XGuild on the TE1 turbo panel to K_PS on the TE2+ pcb be correct along with GND to GND? Do I need power to the turbo panel?

Alternatively can I just wire one of the extra sanwa buttons in the TE1 to the K_PS and GND on the TE2+ pcb.

TE Round 1
https://s24.postimg.org/4c2kanq3l/IMG_20170128_145141_1.jpg

TE2+ PCB
https://s27.postimg.org/elnnsl3wv/IMG_20170128_145207_1.jpg

TE2+ Playstation Button PCB
https://s27.postimg.org/rlprkn9jz/IMG_20170128_145221_1.jpg

2

XGUILD and GND is all you need, I believe.

3

Yup x guild to k-ps and gnd to gnd. Don’t need to power the 360 panel as it only uses power for lighting up the leds.
Now if it was a ps3 home panel then that would be a different story.

If you want touch pad you could wire that up to turbo.

4

Excellent, thank you both for confirming. :slight_smile: