I’ m pretty sure they were posted earlier in this thread. Just search it through.
I’m not exactly sure but does the Xbone Atrox even have player LEDs? It seems it just has one LED on the home panel (Not sure if they flash in four different sections as it’s a rectangular piece)
Compared to the 360 Model, it’s more prevalent but the Xbone it seems more washed down/simplified.
It’s a single white LED.
Gotcha.
Was a bit confused how I was going to wire it to the Brook UFB. (Guessing just wire it to the VCC and maybe daisy chain to P1, P2, P3, P4?)
Hello guys, I’ve been having some issues with my razor stick(the 360 one). Cable seems to be deffective. Sometimes it turns on, sometimes it doesnt. I did contact razer, but they told me they dont allow orders of just the cable(probably because my warranty is no longer valid). I did notice some talks about drilling the stick, soldering and what not, but i am not very confident in doing any of those things. Is there any other way to buy a replacement cable?
I received my Panthera SFV edition today and i have some question to other Panthera owners.
Looking at my stick the “crack” between the lid and the bottom of the stick is greater towards the back of the stick.
Is this the case on your sticks as well or is it supposed an even spacing from front to back?
(Sorry for potato quality pics)
edit: The top panel flexes somewhat when pushed down. Only when pushing on the side of the lid though, and nothing thats noticeable during normal usage (imo).
I just received mine and it’s exactly the same, I’m guessing that’s just the design.
I have a different problem though, I’m having issues using it as a legacy controller in PS3 mode on SFV which is pretty important for since you have to do it that way if you want to chat too. The firmware update said it was successful and it seems to work fine in PS3 mode on my PC but on PS4 it needs to be unplugged then plugged back in for the game to detect it then very quickly starts going haywire with stuck directional inputs and stuff. The Venom that I intended this as an upgrade on worked a treat this way, no need for unplugging or anything.
Is this an issue with the game? These sticks/this firmware in general? Or is mine er, special? Really hoping it’s not the latter since the UK Razer store is already out of stock on them.
Edit: Tried reinstalling the firmware just in case something went wrong there but no change. Mostly when plugging the stick back in to reauthenticate it it just acts dead (though the game ‘sees’ it so long it’s been unplugged first) but occasionally it’ll work for a few seconds before locking up.
So much hate for the atrox here’s myn 3 years old still going strong and been modded a ton just got round to putting in my brook board i would buy another stick if i had the opportunity
hello sorry if this already been asked,
my razer atrox just died, everytime i plug it on my pc the turbo button and razer logo only flash for a bit and then it turns off
and then i got device not recognized error. same thing on other pc. i’ve already tried reinstalling the driver but still no good
is there any way to fix that?
Mine does not have this at all the the lid sits perfectly flush.
You cannot switch from PS4 to PS3 mode without disconnecting the stick. Both the Panthera and the TE2 work this way.
EDIT: Did some testing with my Panthera. It seems to work spottily in legacy mode with the stick sometimes outright not working at all.
Thanks for taking the time to try that out, that’s interesting. Razer sent me a new USB cable in case that was the issue but there was no change and the last I heard they’re going to send me an RMA.
From what you’ve said it seems to be an issue with the stick and a new one won’t be any different, though it reads like you might’ve got more out of yours than I have. With mine it works fine for a few seconds then locks up, every time.
What surprises me is that Razer said they’ve had no-one else with this issue when I would’ve thought using it in legacy mode wouldn’t be that unusual since you have to if you want to use voice chat. I might point them to your post and see if it’s something they could perhaps look at with a firmware update. Can’t hurt to try. I really like the stick and would ideally like to keep it but unfortunately it’s not a huge amount of use to me with this issue and I can’t really justify £200 if that’s just the way it is.
Does anyone have the Dimensions for the Decal on Razer Atrox (XBONE ver.) ???
Do what I did where I have a USB headset adapter.
Wrong thread.
I bought an Atrox for xbox one to mod it with a brook UFB (bought it over the Panthera because of the replaceable plexi) and it came today. I’m getting things ready for the UFB to get here tomorrow and I’ve ran into a weird problem. I cannot find ANY information on this weird touch strip thing that is ONLY in the xbox one version of the Atrox. It’s not mentioned in the instructions, advertisements, or any review that I’ve found. It also hasn’t been labled by anyone that schemed out the PCB. WTF does it do? I want to attach every button and interface included in the stick to the UFB. Here are pics to clearly show what I’m talking about.
pic #1: The USB connector and the “touch strip” over it.
pic #2: The cabling of the “touch strip” and the USB (I’m showing both to show that this thing is really separate from the USB cabling)
pic #3: A schematic by vicko where he labels everything except the weird touch strip. It has 4 pins/cables.
So does anyone have any idea WTF does this do? I can’t try it out myself because I don’t have an xbox one and the stick doesn’t work on my version of windows.
its some type of infrared/reflector thingie for the kinect sensor that doesnt have any use in any actual games afaik. . Either way the UFB doesnt support it so if you really wanted to keep it functional youd have to dual mod the ufb with the existing pcb
Thank you so much. It was driving me insane.
If someone’s done it already, or if I missed it, can someone post here an LED mod for the Razer Panthera? I’d like to see what it looks like. I’ve been wanting to mod it with LEDs for a few months now but I have no idea what parts to get.
just made a write up on reddit r/fightsticks a tutorial on how to install the kaimana mini in the razer panthera first write up as far as i could tell. so check it out!
I still love my Atrox too. I’ve been thinking about modding mine with a Brook UFB too? How difficult was the mod? And, did you replace the stock USB with a Neutrik one?
not to dificult overall yeah theres a neutrix usb in myn wont fit straight in though hole will need to be dremmel’d "brook fighting board "thread theres a guide somewhere in there for the atrox