MY PLAIN ASS STICK…
it’s not done cuhz i haven’t soldered yet. :mad:
here…i know it’s blurry cuhz i have a dull ass camera. could someone tell me if i’m doing something wrong?
awwww…duck.
looks good ! 
I need help working with the DC pad.
I opened up to see what was inside, and now i can’t put it back togther. So, i figured that if you fine gentalmen could help me out, maybe i could turn it into a stick.
I reviewed the link in the first page. Here it is:
http://mc.pp.se/dc/controller.html
I don’t understand the info. If someone could explain it to me as well as explain the sodering points, that would be greatley appreciated.
thanks
Looks good, where’s the pcb though? :lol: Are the red wires the ground and white wire NO’s?
the Mas box is built very well, for the side boards they use 3/4" wood and the face, front, and back is 5/8" thick. The bottom piece is just thin board. they use 3/4" square sticks of wood inside each corners and attach the boards thru metal brads from the inside, so the finish is very smooth. As for as soldering is concern, its very clean. But hard to modify because for the ground they use a wire w/o any plactic insulation covering and the wire stretch tight across all points so if you want to bend the microswitch to take it out you have to desolder the ground. They use really thin wire.
I agree w/ DF. I have a MAS and have taken that bitch apart before. If I don’t get rid of it I am just gonna take out the fuckin’ PCB and stick (cause those are the only good things on the fuckin’ stick) and use them for parts. Thanx.
-See Ya!!!
P.S.: Oh yeah, the box for it kicks ass 
. Thanx.
-See Ya!!!
hey does anyone have or know the url to an mvc2 pic of storm and magneto? I found a site with all characters pick except for storm and mag.
btw i made my button layout to wide, as in the buttons are too spaced out. is there any way i can go back and maybe drill my holes a lil bit to the left and just secure the buttons with washer that goes under? will that work? or do i have to fuck with the stupid wood glue?
brydon just get a new piece of wood man, for like u nder $5, how can u drill it too wide? what template did u use? the holes should be 1.5 inches apart from the middle and the stick should be right between the middle of the 2 rows and the center of the hole for the stick should be 4 inches from the center of the left most button.
and i kno abotu gamegen.com duh! he doesn’t have the mvc2 pic of magnus and storm w/o the move list.
Yo Brydon just check out that button layout I previously posted. Also to everyone using that layout, I kinda fucked up on the start and select buttons. You guys might want to kinda move them up. Thanx.
-See Ya!!!
can someone tell me where i can find custom/art work for my overlay???..thanks
chrism you have to make them yourself or get someone to make it and bring the disc to kinko and print there. its $1.98 for a 11x17" print out.and $3 for lamination.
need help
wondering if anyone can tell me what to do my mas stick dc port no longer works and my neice stepped on the ps2 outlet and it broke 
can i just replace those cords with ones from a regular dc or ps2 pad? if anyone can help me with this it would truly be appreciated
there was a website further back in the forum cept i cant find the number…there was a webpage with tons of pics…and the nearest kinko’s is like 2 hours away…i was wondering if someone could have it printed out with my measurments and i will pay for shipping and so on…just curiious to see if someone will do it for me…i have a two player…and a single i am doing this for my single now…i used paper for the two player…but if someone could get the two player layout that would be great to…i used cdvisions two player…
Previously Posted by chrism1829
hehe I made that one too, LOL. Thanx.
-See Ya!!!
hey i would have used it…but my printer is broke…!!! anyway i dont want to get a new board cuz i will prolly fuck up even worse. im gonna try drilling the holes a bit wider to the left and hope they stay secured. i only need about a half inch to the left anyway. btw my joystick isnt even centered in the hole…i could only put 3 carriage bolts in becuase of that…lol such a fuck up i am.
What I always do is place the printed out layout on my board(s) and place it where it is comfortable for me, then tape the paper to the board. Next, I get something like a knife or pick and where the center points for the holes are on the joystick i.e. where you would drill for the carriage bolts, and the center for the joystick, I would make puncture marks through the paper onto the board, so that when I remove the paper, I’ll have precise measurements for the holes when I drill. I can’t really explain it better than that, but it works for me. I remove the paper and I’ll see the dots/punture on the board and take the drill and drill where I have made those punctures. 95% of the time I get acurate holes that match up when I install my joystick and the joystick hole is also centered. I do the same thing for my buttons, puncture on the cross hairs (poke a damn hole through the paper and like you want to go through the board also~ Breaking it down Barney styel!) Hope this helps.
If you fucked up, like you said you did, nothing will correct that mistake except to make another cp. You can still use that board, but you’ll just have to cover those holes with your artwork or whatever. Another thing you can do is use button caps or whatever they’re called that happ sells.
brydon just follow my measurements, 1.5 inches from the center for the buttons. a new board would just cost like $2 man. If you drill new holes .5 inch to the left it would look really ugly. i mean realllly. like damn.