What are the dimensions to your box?
If MAS doesn’t do saturn connectors, you can probably get a PSX-Saturn converter. I don’t know if they make em, but I have some PSX-DC converters that also have saturn ports for saturn-DC conversion, so that shows there may still be some demand for saturn converters.
So, how much does it cost total for the materials to make a stick, and much time does it usually take you guys to do the wiring and stuff?
I just brought the hori SC2 arcade stick for gamecube and I was just wondering were can get a PS2 and/or DC and/or X-box converter…anyone???
Jay
how come when i solder my wire on to my copper points, they fall off after about 10 mins…they look good and all, but then they just fall… and go plop.
and also wtf do i use to open up that little piece that goes on the end of the joystick. its like a C shape with a lil point in the middle. i cant push it on the end of my stick for shit…
try putting a little solder on the copper point itself…and don’t forget to tint the wire…if that doesn’t work, get some flux.
just use more force…weakass.:lol: 
That shit is as easy as cake!! Get a screwdriver, brace the ‘bat handle’ of the stick against yourselft or on a surface, then with one hand push down on the square actuator, while with the other hand with the screwdriver, you ‘pry’ out the C-clip/guard. Just stick in the screwdriver in the gaps and pull the screwdriver handle back. <= [had to explain it Kindergarten style for yous and or everyone else to not get confused or whatever]
thnx rotendo, imma try it tonight.
vimmy, stfu catboy, u aint pushin that thing on with ur bare hands, im sorry but in not risking coporal tunnel syndrome or some shit.
cost:under 70 if you have the necessary tools. most of the cost is the stick and buttons…
time:i’ve got it down to less than 10 hours.(including wiring/soldering/plexi/paint).if you have everything ready to go.
sorry, but i dont want to read through 50 something pages…
can someone point me to where i can get info on replacing the stick on a red octane stick? what page is it on, if it was discussed?
/me shines and cocks up his sniper rifle
:lol:
Which hole am I supposed to use to mount my joystick? I’ve got a Happ Competition, and there’s a small hole and an oval looking hole. Which one do I use?
depends on the size carriage bolts you use. if you have those large bolts from HD, then use the oval holes…cuz they won’t fit…if you have the smaller sized carriage bolts, then use the smaller holes…
theres also a way to mount your joystick w/ out showing bolts…if you get some metal screws which have flat heads…you can mount the bolts under your artwork flush w/ the wood, under the plexi/lexan…which gives the stick a somewhat cleaner look…either way is fine, having the carriage bolts exposed does not affect gameplay…
I bought an AstroPad for DC, and my friend is almost all the way done hacking it, he is having problems with the L and R triggers, which are analog. I just now looked thouroghly through CD-Vision’s pad’s that don’t work, and I now see the Astropad is in there, tell me this isn’t true. 
I enclosed a picture of the wiring to one of the triggers. Sorry if it’s bad, but I don’t have the pad with me.
is u use an astropad, you will have problems wiht the analog buttons, so when you press L+x, you will get L~X instead. Its weird how L would come b4 x,
but heres how you wire the shoulders:
You have to use all 3 wires. from the pcb L1 will go to Com, 3v will go to NO, and GND will go to NC, do the same for the R button.
hey guys…do any of you know how to draw 3.3v from a PS1 Mad Catz dual shock pad??? I can’t seem to do it for some reason…my p360 keeps drawing lower than 3.3v.
need help hacking MadCatz wireless pad for PS/PS2
I bought the MadCatz 900mhz Wireless controller pad for PS/PS2. Wondering if anyone has hacked this pad. I need help with figuring out the wirings for analog&digital. Also trying to figure out how to hookup the recharging station.
Any help on this topic would be greatly appreciated 
… and yes, I actually read through the last 58 pages of this discussion thread :fury:
Check this shit out!
and the most perfect/professional looking stick I’ve ever seen… ever!! webpages.charter.net/mjellis1
Is it me, or does it seem that random people have been going through threads and downgrading the thread ratings? Because just about two day ago, it was like 5 bars/max, then I have seen it go down one, and today it’s on 2 bars!!! :eek: WTF is going on? I know that no one here did it because I haven’t heard any complaints except for having to read through all the damn pages, but come the fuck on, it’s valueable information! Anyway, as long as the people get what they want, rating doesn’t matter. I just think that it’s fucked up someone/some group of people would do that just to do it.
Or maybe it’s just me and only a few people have rated it (6 at most) and 3 were max, then the recent ones were like 1 or 2 bars, then it’s understandable. Oh well… THIS IS GOOD SHIT!!
need help hacking MadCatz wireless pad for PS/PS2
I only show 22 pages, because I have it set to view it by 40 posts per page and not 20 or whatever the default is. You should do the same, less trouble. I’m thinking of adjusting it to a higher number.
need help hacking MadCatz wireless pad for PS/PS2
IMAO
:lol: