where do i solder my d- d+ from the sys 2 wires to this brooks board??? Red is other usb. blue is ps360 usb
Glad I came across this before asking w/o researching…
Image courtesy of @Phreakazoid 's site along w/my paint skills at work.
imgur.com/0P115s3
You’re talking about this, right @Vicko ? and this is for the Turbo Button, Correct?
Would Pin2 be the haptic button by any chance? I’m definately utilizing the turbo button at least…
Thanks for the info btw!
1 - LEDs on/off/haptic
2. lock/unlock
3. home
4. common line
5. player led cathods
6. ir led cathode
7. clock
8. data
9. player led anode
10. ir led anode
11. 5v
12. gnd
THANK YOU!! This is what I needed. Very much appreciated, sir!
PS - I’m sucha dummy for thinking turbo button instead of lock/unlock. durrr
ok resurrecting a very old thread. i have an xbox te2 with crossbone that works as expected with a ps360. the only connections are the 20
pin ribbon cable and D+/- . i can’t get it to work with a brook universal fighting board. i know the brook works as a stand-alone board in another stick. i hook up the 20 pin ribbon cable on the brook which i’m sure is correct and D+/- on the brook on J6. It just won’t work on either a PS5 or a PS3. i’m using ‘home’ as my switch toggle. again it works fine on the ps360, not at all on the brook. the brook does have the blue LED on.
Any ideas?
Thanks so much