Sanwa MDF DIY cases are in stock now!
Let us know your thoughts and if you have any questions.
We’ve made the 6 and 8 button sticks available as requested.
Thanks!
Nice cases Lucky! :tup:
Update:
The new HAPP cases will be cheaper than the old ones!
We have some ready for custom orders if anyone is interested, they are just not listed on the website yet. If interested, please PM me or email us on the website.
Thanks
Hey guys, it’s been a while since we have posted.
Just wanted to let the people who don’t know that DIY case prices have been dropped a little bit.
Also, this is also for people who haven’t heard of us yet.
Here are some pictures of recent orders.
http://i700.photobucket.com/albums/ww3/acencha/Picture030-1.jpg
Satek
Definitely going to pick up one of the DIY Sanwa cases in the next couple of days/weeks.
Was kinda hoping to try out some seimitsu buttons if they fit because I got a cool artwork idea but if not, I can stick with sanwas.
Seimitsu screw-ins fit just the same as Sanwa screw-ins, so no problems there.
Nice cases, guys!
Thanks for the compliment :).
Also, more pictures of finished cases are appreciated!
Hey guys, new to the site…
I want to purchase a few of these, but I’m trying to figure out a way to add artwork without resorting to adhesives.
Any suggestions?
I have no way of cutting plexglass, and I’m not quite sure how to even attach the plexiglass if I had it.
Satek I cant PM or get the email on your site to work how can I contact you, I have a few questions for you. Just joined last night so PM is blocked til five posts and I dont want to spam the forum.
Thanks
Hey, could you contact LuckyDay. He knows more about me in the painting department :).
Sending you a PM, let me know if you receive it.
For those of you that have purchased the Sanwa MDF boxes (small/large)… Do you know if one of the seimitsus joystick would fit in there… say LS-32-01 or LS-56-01? Anyone care to share their findings (need extra mounting plate, hole not big enough, etc)
Thanks… planning to buy 1 soon…
The LS-32 Seimitsu sticks will mount fine in the space we’ve carved out for the finished cases.
If you’re using a 56 with the square plate you will need to use a router to adjust the hole slightly, or contact us to see about getting the space adjusted before you buy.
Hey do you guys have a bigger size for the HAPP/il cases?
Do you guys sell the happ size cases with no holes drilled? I have forstner bits and want to make a Fanta or Happ Stick, Seimitsu Hybrid. I wanted to forstner countersink the buttons holes my self for the screw ins nuts.
I would like the joystick area still routed though.
I have a question. On the shopping cart, when I choose Canada Saskatchewan, for the shipping it comes to zero. Does that mean that the price of shipping is included? So it’s only 24.99 for a case total?
EDIT: wait, the front page says plus S/H. So, I would have to complete the checkout process and then you tell me how much shipping is? Can you just tell me now so I know before I buy?
Yes, we could make you a custom size.
We could do that :). We offer a $5 discount for no holes too! However, please keep the wood underneath supported with another piece of wood or else the MDF will tear up.
Hmm, could you email us at support@qcfgaming.com and we’ll talk there.
Thanks
Hey I just wanted to say I’m very happy with the case I got from you. Its in primer right now I hope to have it done in the next couple weeks.
How much would the custom size cost? hopefully 24.99 usd 
Thank you very much :))
We charge an extra $2 for bigger sizes since we have the wood precut so essentially we are wasting wood =.
BTW guys, the Large Sanwa MDF cases have sold out twice, I just wanted to thank everyone for it.
You guys will be able to order them again this weekend (Probably Saturday).
Here are some more pics if anyone is interested (even though they all look the same) -
http://i700.photobucket.com/albums/ww3/acencha/Picture038.jpg
http://i700.photobucket.com/albums/ww3/acencha/Picture039.jpg
Satek