PS3 stick converted to... a Wii U?

Kuniku · 2013-11-28T20:51:42.000Z

Hey,

I’m new here and have been asking a fair few questions, over in the nooby area, but I feel this question is probably a tad more suited here…

I know a lot of sticks either come PS360 compatible, or that 360 sticks are easily converted to run on PS3 as well etc. But I was wondering how compatible they are or can be with a Wii U?

After much deliberation I’m most likely going to be picking up a SoulCalibur V Arcade FightStick SOUL Edition for PlayStation®3 for Xmas. As it appears to be the best stick in my budget in the UK. And while I’m no techy type, I was wondering how compatible things are with the Wii U? I’m guessing plug and play is probably a bit unlikely, but on the off chance it would be a really easy mod…?

Gummo · 2013-11-28T21:05:16.000Z

Get a PeeWii pcb from Toodles and install that.

FreedomGundam · 2013-11-28T21:30:12.000Z

For anything designed for PS3 or 360, you won’t get plug and play compatibility on the Wii-U, that’s for sure.

Alternatively, you can try to swap in a TvC PCB into an SE? I think it takes a bit of work to get it to fit right into a TE-style casing, though…

d3v · 2013-11-28T21:43:49.000Z

As Gummo said, PeeWii board is your best bet.

gahrling · 2013-11-28T21:46:04.000Z

For reference:

http://www.godlikecontrols.com/

http://www.godlikecontrols.com/download/piiweewelcome.pdf

Kuniku · 2013-11-28T21:58:52.000Z

Thanks for the replies guys! Might be worth looking into down the line then!

butteroj · 2013-11-29T00:52:56.000Z

TvC pcb

Darksakul · 2013-11-29T01:11:47.000Z

PeeWii PCB your best bet, followed by a TvC PCB.
Note you need a separate Wii cable for the PeeWii board.