1521

Updated first post with mounting info for Q4’s and Q3’s.
Just a small amount of orders still need to go out before I am all caught up.

Metal Panel list is at just about 14 just waiting for some people to get back at me before I really add them to the list.

VLX Plexi pic should be up around thursday.

EDIT: It rained today so I wasnt able to actually make the plexi but I did get the template made for it.
The two pieces

Fit together so nicely you can barely see where they connect. Oh yea Im good.

1522

Hey bro, I’m not sure if I’m one of the people you’ve emailed and I didn’t get it (mpower)? I’ve been getting shit loads of email lately, so just checking. I certainly want it and my stuff should be on route to you as I type. Thanks

1523

No worries I havent sent any invoices out at all yet. The number is at 13 right now and I am just awaiting some emails from a couple of people which would make it at 16.
I do believe that I will be sending invoices out next week.
Also email the tracking number you got so I can make sure when it gets here, my post office is kinda stupid and I dont want any problems because it doesnt have my name.

1524

How do I order qanba q3 replacement panel? Theres no option on the webiste. Do you do black plexis?

1525

I’m interested in a Hori SCV metal panel replacement and was wondering if you offer a laminated service for artworks to imitate ‘stock’ metal panels (TE and Hori etc.) Pretty much without the need to use plexi.

1526

Unfortunately I do not offer laminated services. You could always try fedex or staples for cheap alternatives but your best bet for something like that is Game On Grapics.

1527

Thanks for the advice, I’ll check my local FedEx or Staples.

1528

Say, blk, are you still doing SE replacement panels? Want to order one with a 6 button noir layout.

1529

Yes I am, I was actually curious if the noir spacing would work in the SE so I did a quick mockup and it does as long as it is 6 buttons.

Here is a pic but photobucket is being dumb right now so maybe this will show up in a bit.

Also invoices will start going out today as I have reached the minimum required orders. If you want to get on this round you need to email me within the next week at that is how much longer the round will stay open. I will take no more than 30.

1530

Just shot you pm, blk!

1531

Any Sega Saturn virtua stick panels?

1532

I did some a while back but I did not have the case for that long and so I wasnt able to get a very accurate cut. The person who I cut them for had to shave the metal a little bit. So I dont really feel comfortabe selling another one when I am not sure if it will fit.

The Sticks I can do replacement panels for are
-Madcatz TE(all)
-Madcatz SFxT Pro(all)
-Madcatz VS
-Madcatz SE(all)

-Hori fighting stick 3(all)
-Hori Fighting stick VX/V3
-Hori 2/3/EX/T1/T6(etc)
-RAP V3/VX SA(all)
-Hori Premium VLX
-Hori SCV

-Qanba Q3(all)
-Qanba Q4(all)
-Eightarc(all)

-Anything Custom

I need to update the first post with this as well.

1533

Very interested in a few things and would like to get quotes-
-Panel and plexi for VLX Premium with the start button removed and only 6 button format (potentially x3)
-Panel and plexi for RAP V3 with plexi also covering entire top/turbo area, start button removed and only 6 button format (x1)
-Panel and plexi for Madcatz TE with hitbox layout (full plexi if possible)

Also-
Is there any type of discount I’d get for ordering multiples over a single?

Thanks.

1534

Everything you want is possible except the RAP V3 plexi covering the turbo as I dont have a full version of that.
The metal panels are all at $45 no matter the customizations(Dual panels - $75) and unfortunately I can not give a discount on those as I dont really make much off of them, however I can give a discount on the matching plexi if you order multiple panels

I am about to close this round next Wednesday so if you would like to make this round. Send me an email @ Customs@TheGameSurgeons.com and we can go over specifics.

1535

how big is your list atm? i might have to jump on this =)

1536

About 20. I will take no more than 30 per round.

1537

I just bought two TE’s for 100 bucks. They are just sitting around now waiting for me to mod them. When your demand starts to shorten I’ll need some more custom panels.

1538

you should get them now otherwise you could be waiting months

1539

Like Vicko said, if you want panels you should get them now before I close this round or you would end up being on the next round. The next round to get cut will depend entirely on that list getting full again.

Also let me apologize to some of you on my slow shipping as of late. I have been taking care of some things and it has been hard to make it to the post office but that wil change next Tuesday.
Thank you for your patience.

Regarding VLX Plexis, I actually have it cut. The reason for no pictures is because getting all the sticker residue off the stock panel is a giant PAIN IN THE ASS. Once I have it cleaned and prepped then I will post up and let people order those.

1540

Say, the website doesn’t seem to let me actually DO anything on the TE page. Am I blind?