Paradise Arcade Shop, LED Joysticks, Buttons, Mods and more

[Digital]

Just to update, I recieved the package this morning. Maybe I recieved the wrong tracking number ? Anyhows, thanks and thanks for the chocolate too

[Honsaber]

Hey, do you guys doing International shipping?
From the UK and love the look of the LVT3 board. Whenever you get them back in stock again for the PS4 I would like to buy one, but I’m not to sure if you guys do international shipping or not?

[ShinMagus]

I live in Brazil and there were no shipping options available, so I had to resort to a package redirector service (don’t remember if there’s a popular name for this) in the US, meant specifically for such situations. I wonder if Paradise Arcade Shop not shipping to Brazil is intentional nowadays…

[Vicko]

*courier

[armi0024]

@Honsaber @ShinMagus we are shipping international, just cleaning it up and getting some better rates for the holidays

[butteroj]

I haven’t seen many posting up sticks using the OBS-MX so figured I would share. I installed these this weekend and must say they are pretty damn good. Install is super easy. Just pop out the old plunger/switch and pop these in. Actual use is perfect. Must quicker actuation than standard sanwas while retaining the light smooth feel(reds). Don’t sleep on these!

http://i92.photobucket.com/albums/l7/butteroj/498FD3F0-3194-45AF-B32B-1F3EA061B8F4_zpstmil8bqo.jpg

http://i92.photobucket.com/albums/l7/butteroj/FC8C02D4-1E52-467B-812F-2798DEE56827_zpsmfjs3m4b.jpg

[Lamb_2sick]

did u guys figure out whats wrong with the software?

[armi0024]

@Lamb_2sick I spoke with the programmer tonight and we are hoping to solve it asap!

[armi0024]

Brook ps3/ps4 fighting board

http://www.paradisearcadeshop.com/4392-large_default/brooke-ps3ps4-fighting-board.jpg

http://www.paradisearcadeshop.com/fgc-console-joystick/1630-brooke-ps3ps4-fighting-board.html

[GOGO.Zippy]

Brooke ps3/ps4 fighting board

http://www.paradisearcadeshop.com/4392-large_default/brooke-ps3ps4-fighting-board.jpg

http://www.paradisearcadeshop.com/fgc-console-joystick/1630-brooke-ps3ps4-fighting-board.html

Awesome… B) B)

[SusanInParadise]

@Digital- As far as the ‘picked up’ message in USPS tracking…I talked to USPS about this and it’s basically a USPS employee ‘picking up’ and scanning…stupid and confusing.
@Honsaber @ShinMagus I did some investigating last week on the international issues…I was getting multiple emails a day regarding this…one customer was even in Hawaii… I searched the Prestashop forums and the USPS module has a bug somewhere…we are working on getting it fixed, using a couple Prestashop experts and trying some things on our end as well.

I hope everyone had a wonderful Thanksgiving… we hosted our first Thanksgiving in over 6 or 7 years…which included some very energetic and headstrong 6 and 7 year old boys…all 3 ‘only’ children, it was a blast. It was quite noisy but it sure was great to have our immediate families together again after being in the middle of the Pacific for 6 years! With that being said this 19 degree weather has NOT been missed!

[SusanInParadise]

So someone needs to tell Bryan to stop spending money

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xfa1/v/t1.0-0/s526x395/12299194_1030152990378921_5691979815008700552_n.jpg?oh=6ea620f7c08ea0495beb7d3fe2b06b39&oe=56D55851

[PaniniKill]

Cross posting from the Q&A thread since Susan you’re probably the best person to answer this question:

*I just got a TE2 and installed the LED PCB but I’d like to also add an LED to the balltop if it’s not beyond my capablilites or prohibitively expensive.
I don’t need any additional functionality beyond lighting up when the stick is on, same as the Mad Catz LED PCB does.

Exactly what parts do I need?

Is there a walkthrough somewhere of the process?

I know I need a hollow shaft and the LED itself but I don’t know if I need anything else or what I need to do wiring-wise to get power to the LED.*

[Darksakul]

Cross posting from the Q&A thread since Susan you’re probably the best person to answer this question:

*I just got a TE2 and installed the LED PCB but I’d like to also add an LED to the balltop if it’s not beyond my capablilites or prohibitively expensive.
I don’t need any additional functionality beyond lighting up when the stick is on, same as the Mad Catz LED PCB does.

Exactly what parts do I need?

Is there a walkthrough somewhere of the process?

I know I need a hollow shaft and the LED itself but I don’t know if I need anything else or what I need to do wiring-wise to get power to the LED.*

You came to the right place. If anyone that can help you it’s @SusanInParadise and @armi0024 .
They helped me before when it came to lighting up parts, and they sell anything that you ever need.

[TINPOwww4545wwww]

I tried that and it still prompts me to go to the site for the software update

I also I will be asked to update have faced the same problem.
We hope that the setup application that measures to this problem is published.

[DJ_Divine]

So someone needs to tell Bryan to stop spending money

Is this the solderless version? Will it go on sale soon?

Will it have a usb-out for connecting to a pass-through easily?

[Feargus001100]

So someone needs to tell Bryan to stop spending money

Is this the solderless version? Will it go on sale soon?

Will it have a usb-out for connecting to a pass-through easily?

@“DJ Divine” I think that’s a female micro usb port on the bottom left corner of the photo

[NENDO]

The micro USB you see is the Kaimana Mini’s programming port. The USB-B jack will be installed on the completed unit. Completely solder free.

[DJ_Divine]

Looking forward to the solder free version!!

[AngryMangos]

Any updates on the software for the LVT3 ? Still haven’t been able to make any changes because of the “Update available” message.