i was about to place an order for actuator set… but that “pimp my jlf” package idea seems even better $_$
At least 3-4 weeks out, and will probably not be a cheap one, a good deal on the stuff because there will be lots of stuff… but it will probably be a pretty extensive set.
But look what is officially in stock!!!
http://www.paradisearcadeshop.com/1548-large/voltech-custom-fight-stick-harness.jpg
http://www.paradisearcadeshop.com/en/jamma-harnesses/734-voltech-custom-fight-stick-harness.html
Don’t know if it has been asked already. But does anyone know which actuator is equivalent to kowal’s? Also, do these actuators decrease just the engage? Or does it shorten the throw to the same degree as well?
Standard JLFs are 16, these are 16.5, 17, 17.5, and 18mm diameter.
Purty harness! Gonna have to pick up 1 or 2.
So for those that pre ordered the ps360+ how do we add the harness? It’s so purty lol
I will add everyone who ordered a PS360 to a special group on the website that will be able to order them at a discount until the 1st. Instructions will go out by Christmas.
FInally the PS360+'s are coming in!!!
Instead of having everyone asking about these, we thought we’d just post the tracking:
https://www.fedex.com/fedextrack/?tracknumbers=876733374383&cntry_code=us
Rcvd my actuators today. I am playing on a D2RV modded JLF. After a couple of hours I can say copper and green are my faves. No more missing diagonals, which is a big problem with D2RV switches.
Also, for everones knowledge these do the opposite of kowals actuator. PA’s alter switch engagement while Kowals changes shaft to gate distance for a shorter throw. In doing so Kowals actuator actually makes hitting the switches tougher.
Thank you!!
Hi is D2RV switch problem
not com from my actuator
throw - engage
8mm - 6mm oryginal
7mm - 5mm custom
proportion is similar
theoretically it should be 7 - 5,25
true… engage on custom is little quicker.
and my still hold nice neutral position
if something acts with d2rv fine this means - it will destroy original proportions on OmronV
true :]
I wish nice day
It just occurred to me, would the metal actuators have problems on optical sticks because of the reflective surface? I really have no idea.
It just occurred to me, would the metal actuators have problems on optical sticks because of the reflective surface? I really have no idea.
You guys should make custom springs for the seimitsu ls-32, I got used to the stiffer springs you guys sell for the JLF and feel the ls-32 too soft.
Woot! Patience pays off in the end 
no
because it is fatter
material has not meaning (without glass:P )
They would have the opposite effect, blocking the light longer, causing a slower activation.
LS-32 Springs are up for our next order…
Buttero and Kowal, thank you for the input, the goal of these actuators is different than Kowals
We do have announcement or two…
Precut high quality Raychem heat shrink is now available
http://www.paradisearcadeshop.com/1676-large/raychem-0375-diameter-1-long-heat-shrink.jpg
PS360’s arrive Friday and will ship this weekend! We have added the remaining stock to the store!
We will be adding the Full variety of RJ45 wired connections for legacy consoles, these are also arriving
Remember all orders over 100 ship free with the “Forums” code
Brian, has anyone asked you about stiffer springs for the LS-56/LS-58 line of sticks? I know you stock those and they’re a fairly popular choice among Seimitsu players.
Hmmm… no, but what about a stick that you can remove, like the “Link” for the LS56?
We can add some more spring options the next time we order 
But I thought the new shaft I drew up might get you excited
Damn Brian u are making moves sir…getting super excited this upcoming year lol…any word on improved .187 qd’s?