3202

mmmm I sent them an email last week and I have not gotten any reply. It’s about the 6 button kaimana kit and what terminals the board comes with. The description says the screw-in but the drop down only lists .100 pin. Anyone bought that kit?

I also would like to know the answer to LVT3 availability!

3203

LVT3’s are coming back!
We had an email server problem and had 500 emails dumped into our inbox in the last 2 days, we are working very hard to catch up!

Default are the screw on, if you want the .100 headers, select that and it will be less expensive.

@mcgowanshewrote http://www.paradisearcadeshop.com/3136-large_default/red-il-competition-pushbutton-psl-l.jpg

3204

Will the LVT3 work for PS4/PS3 TE2s? I did some googling and found an IPW article talking about the LVT3, and it breifly mentions that this board would work on the Ultra SF4 TE2 for PS4/3. So I’m assuming this will be no problem for my Xrd TE2?

3205

The current version is Xbox1 specific. We are working hard to bring another option to the table before Evo.

3206

Awesome, thanks for the clarification.

3207

Hi I bought a stage 3 phreakmods pcb and it didn’t come with a 20pin cable and the switch spot doesnt have a wire coming out

3208

Thanks for responding.

But yeah that’s the problem the description is as you say but the drop down list when ordering only has the .100 pin option. I can’t select the screw-in (while it is possible on the other kits). I am talking about the 6 button kit (http://www.paradisearcadeshop.com/kaimana-led-series/1164-paradise-kaimana-led-driver-pcb-6-button-kit.html).

Thanks!

3209

If you select nothing, you get screw terminals. If you select pin headers, you will get pin headers. I know it’s a little confusing. Just don’t select pin headers. You can also put a note on your order. You can specify there to make sure you get the right thing. Happy modding.

3210

We thought most would just take screw terminals, but wanted to give the option of pin headers to save some money. I’ll edit it to make it to clear things up.

3211

(Note that I’m talking about the 6 buttons kit, the other kits work fine) Not touching the drop-down list at all and going straight to add to cart still lists the kit in cart with .100 header. If I order it like this I will receive the screw-in and not the .100 pin? Basically right now it seems there is only one configuration that is order-able on the site, mislabeled or not. (english is not my main language hopefully you understand what I mean)

This is how it appears in the cart, I’m assuming 55$ is the correct price with the screw-in (the product page list 50$). Note it still says .100 header though.

Anyway, I will add a note to my order, 55$ is right?

Thanks again

3212

Ouch! Well, that may explain why a question I sent through your site contact form a week ago went unanswered…

I wanted to know which connectors were on the Kaimana LED boards & adapters, as well as Pele LED rings, as I’m thinking about crimping my own, with cables sleeved and just the right length.

The cables between the Kaimana and the adapters look like a Molex, but a very small one. Between the adapters and Pele, it seems like .100" Dupont headers, one of them seeming keyed, seeing the pic of the cable (guess it’s the one connecting on the Pele side). I know where to get usual 4 pins Dupont connectors, but can’t seem to find what those keyed ones are called either (I guess a classic Dupont connector would do, but the keyed one seems easier to avoid inverting polarity)…

One other question I didn’t think of then (it’s mostly why I post in here- would have waited for an answer to my message on your site, otherwise, now that I know you seem over-busy): do you know when you’ll get Big Kahunas back? I’m kind of waiting for those before ordering a few things (shipping to France, so I’d rather group items if possible).

3213

Hey folks, sorry for this noob post, but searching for this info returned an overwhelming and confusing set of results.

I have an new version Xbox One TE2 that I’m looking to get LED buttons and balltop for. The LVT3 seems like my best option? Is it sold as a kit, with led rings, wires, and everything else you need for hookup? Or would the Kainmana kit be something I could use as well? Any documentation would be lovely! The wiki link linked in the Paradise site is down.

3214

The LVT3 isn’t currently available right now but armi said that he would have them back in stock sometime by EVO. It is a full kit made specifically for a plug-n-play install for the Xbone TE2. You could get the Kaimana right now but that kit requires some mod/soldering experience.

3215

Thanks kryton, I’ll hold off for the LVT3 then. What was the price on this kit?

3216

I don’t know how much the LVT3 will be; armi may be able to help you there. The Kaimana kit can be found here paradisearcadeshop.com/kaimana-led-series/1142-paradise-kaimana-led-driver-pcb-8-button-full-rgb-kit.html

3217

Appreciate the responses. Many thanks :slight_smile:

3218

I place an order for the stage 2 crossbone last week on April 7, is there any way I can get an update whether or not it was shipped or still processing? Thanks, I can pm the order information

3219

@SpacedOutCadet please text me your name and i’ll get you taken care of right away! Very sorry about that! 651-332-3665
@dmartinezbrown1 Sorry for the delay, I will check and get back to you via email.
@Malacith We do have about 40 left…i’ll update the stock count on the website

3220

Do you guys have any of the 1.5lb JLF springs in stock?

3221

Thanks a lot @SusanInParadise: order passed!

Just a question about the order: it seems to have went well, but when coming back from the Paypal page to your site, it tells me I have no order in my history. I received a mail from Paypal confirming the payment, and detailing the items I ordered, but, well, I guess it doesn’t hurt to ask: is that normal?

Also found out there seems to be a bug, in your wishlist functionality: I can’t delete the one I used as a draft when preparing my order. No biggie, but it’s just to warn you about it.