1-off/on/haptic
2-lock/unlock
3-home/guide
4-common line for buttons
5-player led cathode
6-ir led cathode
7-clock (HC164:pin8-CLOCK)
8-data (HC164:pin2-A2)
9-player led anode
10-ir led anode
11-5v
12-gnd
has someone found a work around for a broken latch, the tab broke off my case.
Can always get creative with a hot glue gun a Dremel and magnets.
damn thats actually a good idea
Hey guys,
I got a madcatz TE2 GGxrd edition since launch 2 years ago. I use it occasionally, playing a few hours a week.
Its stick is now not working anymore properly, on SFV for example, I cant even do a horyuken move when I am on left side of screen.
Should a buy exactly a new stick from sanwa or a seimitsu ls-32 would do a better job?
Also when I close the lid it doesnt fit properly and does noise when making the moves, it is a problem with the hinges mentioned above?
I dont know any other forum thread to get replies for my questions on this matter, I hope I can get here.
hi everyone i have a problem with my stick TE2+ 
just when i activate “up” is stay up all the time
like this : https://www.youtube.com/watch?v=GkciMqVozEo
someone know how i can fix this?
My TE2 USB cord might have died, will confirm with a friend to test with another cord, where we can find that USB cord these days ?
They sell them on amazon.com.
Anyone painted their bezel? I have a Rivals TE2 and I really don’t like the orange. The only bezel still available to buy comes in just red.
I want to paint mine white. Basically what kind of paint should I use or spray paint for that matter.
Found this on reddit
Sand 100-200 grit
Spray primer (let it cure for 24 hrs)
x2 Spray base color (let cure for 24 hrs)
Spray clear or matte coat let cure for (24-48 hrs)
Wet sand 800-1000 grit
Polish with NuFinish swirl remover
So just plain old spray paint I guess.
Though this was for the side panels rather than the bezel. Don’t know if there’s any difference.