Alright, question time:
MadCatz TE-S for 360 w/ TE Kitty installed. I want to add a DB15 port for Neo Geo usage. What do I need?
So is the TE kitty out of production?
Only one person can answer that : (
so my xbox 360 vlx pauses randomly when i’m using it on ps3. it’s modded with the kitty if it wasn’t obvious enough. it randomly pauses about every 30 mins to an hour of play. i know it’s not the usb or the xbox 360 pcb because i plugged it into my pc and had no disconnects and the stick was in xbox or windows mode. i just updated the firmware, so i hope it helps with this random pausing on ps3.
has anyone else encountered this problem?
updating the firmware fixed it. also making sure my quick disconnect cable was tight.
I am currently having an issue with my stick with the TE Kitty installed.
The X and O buttons when held cause a kind of rapid fire input, as if turbo is on for just those two buttons. Anyone encounter that issue before?
Also if I were going to update my firmwire in Win 8 how would I go about doing that? Thanks a bunch.
My VS stick has been working fine on both Xbox 360 and PS3 up until today. I went to play on PS3 and it wouldn’t register. It would tell me “An Unknown USB device has been connected” and the stick wouldn’t work. I then plugged it into my PC and it just says “Arcade Stick (Super SFIV Fightstick VS)” and doesn’t say TE Kitty. I tried updating my firmware and it would flash real fast and not take 30-40 seconds as it says it should. Anyone have any advice? Is there new firmware or something?
I have my te-kitty in my te-S round 2 stick, and it works fine, sometimes it has issues with windows 7 updates Xbox controller updates. I just unplug and replug and it shows te-kitty again. Having it for two years now, its worked great for me only issue I have the turbo function doesn’t seem to work as often or show up on the button display when I want to play a shooter up. If any of you need help with pic’s of inside my stick for reference, I could post them up also.
My concerns now are their going to be a firmware update to support ps4/xboxone ??
If anything (using logical thinking), it must be defaulting directly into 360 mode. That would explain why you’re not seeing TE Kitty when plugging it into a PC and PS3 says unknown device.
Any word at all on Toodles? I want to give him money for stuff but the Remora has been out of stock for a year now. 
I have this fund to give to Toodles when he gets those and TE Kittys in stock again…
General question: How successful have folks been with getting Saturn to work with TE Kitty and/or MC Cthulhu?
On my second cable now and can’t get up or down working. Considering the pinout grid, this seems unlikely a simple wiring issue as the other buttons share the same wires. I did a reflash too.
If I understand correctly, I can make a USB-RJ45 cable to use on the TE Kitty. I can also use the already existing 360 usb cable to use with my PC.
What happens if I use both… at the same time… with both consoles turned on? In other words, I want to be able to play either my PS3 or PC games without having to swap cables… and without having to turn my PC off. Is this do-able?
Don’t.
You risk frying the Stick PCBs as well as breaking both consoles.
Does anyone know if the Kitty will be able to be updated to support Xbox One? I have a ton invested in my Madcatz VS and am praying my Kitty will be able to allow me to continue using my VS.
NO!!!
A Million times no.
Toodles said himself he will not make a PCB that is Xbox 360 Compatible (End of Story), the way the Kitty worked its that it will piggy back on a existing Xbox 360 PCB.
The Kitty and the Cerberus sit on top of a existing Xbox 360 PCB and piggy back off the Xbox 360 PCB, acting in between as a bridge, when connected to a Xbox 360 console the PCB passes over control to the Xbox 360 PCB. For PS3 play the Kitty (or Cerberus) will take charge and the Xbox 360 PCB remains dormant.
The Xbone is supposed to be even more locked down and secure than the 360. It took years for the Xbox 360 security encryption to be broken. We resulted to had hacking Xbox 360 PCBs for our Dual mods until the Paewang PCB and later the first gen PS360 came into the picture. Now we have the PS360+ and what ever Qanba is using as 1 PCB solutions instead of the actual Dual Mod.
The PS4 and Xbone is not even released yet and it be a while before someone cracks the security encryption.
360 Mode is working fine, TE Kitty mod is giving me an issue with the A, B, X, LT, RT, and RB buttons, for each of those inputs LB is activating at the same time, how do I fix this? I’ve tried flashing on Win8 going to attempt flashing on Win7, or is there an older firmware I might be able to use? Issue just began today.
Edit: Fixed with Win7, Win8 won’t patch or discover the device in bootloader mode. A fresh patch will do the trick, not sure why the issue came about, began after I begun playing Chronophantasma.
Thanks for the info. I guess I’m just gonna have to play KI on pad for a while then. Hopefully some form of mod comes out relatively soon that I can throw into my VS stick at some point. I already have 3 dual modded fully customized MadCatz sticks and I don’t really want to carry around a second stick at tournaments just for KI haha.
Pad warrior it is! lol
From a while back, but my Saturn cable seems fine, I made it from a generic extension cable. Admittedly it’s seen little use but I saw no signs anything was off while using it.
I know that the Kitty board is now out of production, but does anyone by chance have any spares? Feel free to PM me about this.