me again ^-^ i just dissasembled my ps3 sixaxis controller to make sure if it was really a 20 pin while taking it apart saw a 20 pin connector, battery connecter and another 4 pin connecter at the center anyone know what that is?
also just found slagcoin diagram of my controller there are 2 connector for l3 r3 if i sold these to some button would that work?
Thanks Jimmy! The adapters are awesome! Worth every penny!
http://joystickvault.com/data/500/medium/IMG_0570.jpg
http://joystickvault.com/data/500/medium/IMG_0571.jpg
Can anyone tell me how to wire the ps button and led button on a madcatz SE stick ?
Got my axisdapter yesterday, thanks! Can the analog sticks be safely removed from the sixaxis without messing anything up? Iām trying to fit the two boards in a very small space and itād be easier without the left stick.
Scott
bafare, are you using a PS3 TE?
shess, removing the actual analog components will require some fancy circuitry to not make the PCB act crazy (I think). I usually just remove the plastic thumbsticks. You can fold the ribbon cable so the board sits on the left analog stick if you need to save space. You just have to secure the board so the left analog stick is dead center. Otherwise youāll have movement.
Im using the SE stick and thanks shinjn for asking !
Ooops. Yea. I meant to say āPS3 SE.ā If you browse a few pages back, the-red-comet was able to modify the PS3 TE board (which is the same as the SE) so he can use the HOME button. There are also pictures.
the-red-comet is the expert at adding an AXISdapter to a PS3 TE/SE.
Thanks for the info Shinjn , iām very close to finally put my stick together hehe , and thanks to the people that answer my questions and help me with all the info , this is my first time dealing with a stick 
Woo, my second one came in fast, took 2 days to get to my door from Jim, the first one spent a week vacation in texas (SoCal -> Texas -> NorCalā¦ seriously?) before it came to meā¦ friggin silly USPS. Anyway, these things are magical. <3
Thanks for the info shinjn, Iāll just have to get creative with it.
Do you have any left in stock?
I just got mine in today. Itās actually a bit smaller than I was expecting but still easy to work with. Thanks for continuing to make these, shinjn, even if you donāt get much out of it.
My Custom SF4 Stick
Hope you all like it, please leave me some comments :lovin:
uploading images now (too big lol have to resize them)
http://img132.imageshack.us/img132/9364/26042009079.jpg
Parts from www.gremlinsolutions.co.uk. 30mm sanwaa buttons and a JLF-TP-8YT joystick
http://img268.imageshack.us/img268/791/07052008110.jpg
Artwork I did on photoshop.
http://img132.imageshack.us/img132/964/07052008108.jpg
Strat/Select/PS button test hole.
http://img200.imageshack.us/img200/1226/09052008135.jpg
http://img195.imageshack.us/img195/615/09052008136.jpg
http://img268.imageshack.us/img268/2971/13052008149.jpg
http://img268.imageshack.us/img268/4955/09052008138.jpg
http://img132.imageshack.us/img132/3352/09052008137.jpg
http://img199.imageshack.us/img199/9492/13052008146.jpg
http://img200.imageshack.us/img200/7203/13052008150.jpg
http://img132.imageshack.us/img132/2238/13052008148.jpg
http://img196.imageshack.us/img196/7720/13052008147.jpg
http://img195.imageshack.us/img195/8941/14052008151.jpg
ALMOST FINNISHED!
My thoughts and prayers are with you buddy. Everything will be ok, good luck! :hitit:
simulation credit
Hello,
my first stick is finished now and thx to the adapter even I could do it
Thx again for this great piece of hardware.
A wireless PS3-stick i couild build myself - how cool is that?
Tobi
Can these parts be found at an electronics store like Radio Shack? Or does the PCB have to be specially wired?
hi gurlz here my first time modding a stick first picture is where i placed the axis board and ps3 and second picture i guess alot people still wondering how to mod their ps button found a very easy way to do it (all credits goes to sousa) all i have left is for led to mod but that will take a while
http://img41.imageshack.us/img41/3133/img0018s.th.jpg
http://img40.imageshack.us/img40/7851/img0019d.th.jpg
sorry noob iphone quality picture
Mmm I donāt know what parts you talking about but to build a stick you need sixaxis controller ( to get the pcb) , axisdapter from Shinjn .
Yoyu thanks for info , check your inbox I sent you a pm .