Will be adding a lot more DIY parts this week to make your builds (Panzer Fight Sticks or not) easier and cheaper! I was able to source some excellent well known gear at excellent prices which means mad savings for you! Stay tuned to jasenscustoms.com (or on our facebook page: www.facebook.com/jasenscustoms) for more information!
New Side Art printed up today! Some EGRET II stuff and some ASTRO CITY stuff. Will be listed for sale shortly. Thanks to TeddyKGB for helping me get the EGRET II stuff all color matched! Side Art / Indoor use Only / Control Panel “Berry” colors are all the same now!
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/1492335_1500566793502671_1511900684_o.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/823484_1500566796836004_1047060963_o.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/1518502_1500566800169337_1998908600_o.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/893956_1500567366835947_2010579271_o.jpg
12.31.2013
- Added the full Line of AkiShop Cables (RF-45 to USB, PSX, DC)
- Added TechFlex by the Foot in 1/4" (White, Orange, Checkered; will add more colors shortly)
- Added TechFlex by the Half Foot in 5/8" (Geared toward JAMMA Harness folks)
- Added .110" QDC and Boots
- Resupplied Winford Solderless DB9 (M/F) and DB15 (M/F) Sockets
- Added Some EGRET II Graphics
- Added Sega Astro City Side Art
I have more stuff coming in this week as well. As I hope you can tell, my goal is to help out those DIYers that want to save money and have one place they can conveniently get their odds and ends at without having to by way more than they need to!
Happy New Year everyone!
Do you have any of the Orange cases laying around? I’d like to see one of the panzers in orange if you can throw some pics up.
No problems Psyko, here are a couple of my Rixtor Sticks. They are Orange top, white sandtex bottom. These were the first version of the PFS with only 7 buttons and had the artwork printed directly on the case.
http://www.thesupergun.com/wp-content/uploads/2013/08/2013-08-14-17.29.03-700x525.jpg
http://www.thesupergun.com/wp-content/uploads/2013/08/2013-08-14-17.29.12-700x525.jpg
http://www.thesupergun.com/wp-content/uploads/2013/08/2013-08-14-21.50.07-700x525.jpg
Added some Taito Egret II Move Strips today. More to come… only have the BatRider/Blank as of this moment. Adding Raiden Fighters 2 and Ketsui after I get some pictures snapped. Also will be adding the EGRET II 1P Control Panel overlay once my graphic designer finishes some tweaks on it.
Have a good one!
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/1486149_1503523766540307_1188347069_o.jpg
Jasen’s Customs Wiring by the Foot, now in stock. 15+1 for super simple wiring harness builds. QTY 1 gets you 30 FEET of wire… 15 Unique Colors + 15 Black… the perfect combination for your perfect build. Only $3.49 per foot!
To honor the new wiring, I’m giving some away for free! I’m confident you will love this stuff!
These just in, custom Vewlix Plates for KR. I love doing this stuff! 1" Standoffs in the corners to bolt this into a wooden control panel, threaded studs pressed into the metal for a JLF rigid mount. All out of 14 gauge Galvanized Steel. No finish at the request of KR.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn2/1039737_1506494226243261_950792589_o.jpg
Jasen’s Customs doing custom panels??? I need to keep an eye out then, maybe I could use this for my arcade cabinet build then.
These were custom done. If you need it… I can build it!
Will there be the option to get a matching plexi?
Absolutely! I’m working closely with FoeHammer to provide high quality Plexi for custom jobs.
Yo Jasen, i hope i did the twitter thing correctly. Dope stuff man, keep up the good work!
Looks like it!
For the rest… Dropping tomorrow with some sweet, sweet extra customizations available!
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc3/1487698_1507630866129597_629677711_o.jpg
That thing looks like you could use it as shelter during an earthquake.
The wide body looks great.
On Sale Now! $149.95
Panzer Fight Stick Wide Body
Sometimes you need something just a bit bigger. Jasen’s Customs is proud to present the Panzer Fight Stick Wide Body! Inspired by the Hori Real Arcade Pro, the PFSWB brings the extreme width you need to the battle proven metal you deserve. Clocking in at 22.4" wide 10.2" deep and a minimal 2" tall the PFSWB is sure to impress even the most demanding of fighters!
Jasen’s Customs has teamed up with the best in the business to make this happen, Paradise Arcade Shop (2013 SRK Company of the Year) and FoeHammer Custom Joysticks. When enthusiasts come together, great things are accomplished!
The Panzer Fight Stick Wide Body - All the customization you need!
It’s a completely custom joystick case ready to be populated with the best of the best. It was designed from the ground up with only the best parts in mind just like it’s little brother the Panzer Fight Stick. The all steel construction is thick sturdy material (14 gauge), way more durable than plastic and a much better feel. You know it’s quality from the minute you touch it. For comparison, the metal used in all Panzer Fight Sticks is just about double the thickness of the HITBOX commercial joystick, the only other all metal Joystick Jasen’s Customs has had a chance to use.
The powdercoat is scratch resistant and strong. Sweaty hands? No problems! Rough play, it can handle that too!
Why is it so versatile?
Everyone has a PS3 or XBOX360! If you have one you bet your buddy has the other. Why would you want a stick that only works on one or the other? Why give up your home field advantage by using someone else’s gear instead of your own? I wanted a stick that could work on everything possible, hence it was designed around the PS360+ as the brain for console gaming! A proven piece of tech that the community adores.
Details of the Construction and Part Compatibility:
14 Gauge Cold Rolled Steel Construction
Powder coated finish - You chose the color!
Laser cut 1/16" Acrylic (Plexi Glass) top by FoeHammer
Kaimana LED Controller Mount
Large Rubber Feet
Vewlix Style, Noir Style, or HitBox Style Layouts
Neutrik (RJ-45/USB) cutout to easily install your detachable cable
SANWA JLF Joystick Mounting inside the case using internal standoffs and nuts
SANWA/SEIMITSU 30mm action buttons (snap in)
SANWA/SEIMITSU 24mm accessory buttons practically placed on the top (snap in)
Stand Offs for the Popular PS360+ Multi-System PCB
Dimensions: 22.4" x 10.2" x 2"
Weight: Approximately 12lbs.
The base price is for a case only (screws, nuts, washers, feet, and standard blank Acrylic top provded standard). It shows up ready for you to build it out.
https://www.jasenscustoms.com/images/D/VewlixComplete.jpg
Is there a six button option?
And would screw in buttons work as well or do they have to be snap ins?
STEZO,
Unfortunately, there are only 8 button layouts. I made the decision based on the fact I use my machine shop and FoeHammer to make the parts. If I made more options, it would just lead to a higher cost because of the additional plexi and design time required.
As for screw in buttons, these are standard layouts so I don’t foresee any issues with them. Then again, I don’t use screw ins so I haven’t tested them out.
Jasen