What size are the feet you put on, and where could i get some?
Thanks for image quoting.
Where? Any hardware store. Those rubber feet are quite common.
Thanks ^__^, and sorry was I not suppose to image quote?
Image quoting is frowned upon, and is a burden on anyone with a slower or mobile connection. If you would be so kind, please edit your post and delete the images from your quote. 
Seeing as the mounting holes are the same for Sanwa JLF. I think the Crown 303-FK can mount correct?
Actually the mounting holes do not match, and you have to drill to widen those holes for a Sanwa, Seimitsu or Crown stick to fit.
I compared the mount holes with both a flat JLF mount plate and several flat Seimitsu flat mount plates the SE, MS, RE and P-40. The VF and SS seimitsu plate will not mount.
I treat the Crown 303-FK as you would the JLF plate and widen holes for mounting. You would want longer screws with washers. See my LS-32 install guide for details.
I canāt say if the mount height would be correct, as there little space inside. Do not quote me on this, but from what I can tell, you might be able to swap the Crown 303-FKās mount plate for the stock Qanba plate inside the Injustice stick.
Also if the joystick is not a Seimitsu LS-55, 56, 58, Sanwa JLF or the Qanba Clone you will have to engage in some case cutting of the bottom panel.
Not sure if itās the game or the stick, but Iām having a major problem with it when I use it with my PC (360 version of the stick) and Iām not sure if anyone else has encountered it.
When using it to play SSF4AE everything seems to work fine for a short period of time before I canāt use the lowers buttons (A/B/RT/LT). All of the tops buttons work fine, but the bottom ones just stop out of the blue. Iāve checked to see if it might be a loose connection, but it isnāt and it works fine when I play on my SF and MvC on my 360. I updated the drivers as well and still having the same problem. Any help would be appreciated.
Whatās the button layout for this called? Is it the same as a HFS3 or an Astro City layout??? Thanks
Those are basically the same thing.
So all 3 of those are basically the same?
So I guess I should take that as a Yes???
Hey, can anyone assist me with dual modding this stick? Hereās how Iāve connected this thus far:
i94.photobucket.com/albums/l119/mario14marth/644593E1-DF54-4E8B-96B4-41C8568E0616-2098-0000019DE5D50CB7_zpse868bccf.jpg
i94.photobucket.com/albums/l119/mario14marth/69466F54-F0F1-4154-B46E-F9C021409CE4-2098-0000019E02206CC6_zpsf7317b0e.jpg
i94.photobucket.com/albums/l119/mario14marth/887C2FFF-614E-46EB-BC33-D4A1DBEE611A-2098-0000019DF5607117_zpsa22a1bbd.jpg
Iāve essentially connected a Cerberus to the injustice stick, but when I plug this into the computer for checking, my computer says that the device is ānot recognizedā. When I solder a usb wire from the cerberus to the computer directly, the computer recognizes it and same with the injustice stick in its original state.
I figured that given the labeling and where the wiring is going, this would be the point I could solder the wires directly. Am I missing anything? I donāt want to wire this stick first and then realize that nothing is working.
make sure you didnāt cross the D- and D+ lines.
Aside from small minor differences (distance from stick to buttons, etc.), yes. Itās the same way that we refer to the TE and Atrox as having the Vewlix layout even though they donāt have the exact layout millimetrically.
Iām pretty sure I did not cross the D+ and D-. As soon as I did, my PC just went back to my Injustice Stick by default. Now, when I tried wiring a button such that I could use the force 360 mode, it seems to bypass properly. But all the computers Iāve used seem to have this issue. I donāt know why it does this.
Arthong just sent me back this
http://i.imgur.com/cXumT4tl.jpg
He should probably have replacement panels and washers up soon.
Got mine for 60 on cyber monday with the game. Iāll play with it stock for a while but Iāll probably upgrade it as time goes on. Lots of helpful stuff here!
@gummo How exactly do you do that? Do you just cut a trace or something on the pcb? Im trying to dual mod it with ps4
My Batman fight stick. I also got it on Cyber Monday for $60, but sold the game for $30 since I already had it. I put about $25 more into it by adding a smoke bubbletop, octogate, LS-33 spring, etched dustwasher, and art. This is my first fight stick and Iām really happy with it how it turned out. The help on these forums is outstanding.